http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김희남,Kim, Hee-Nam 한국금형공학회 2008 한국금형공학회지 Vol.2 No.4
The magnetic polishing is the useful method to finish some machinery fabrications by using magnetic power. This method is one of the precision techniques and has an aim for clean technology in the transportation of the pure gas in the clean pipes. The magnetic abrasive polishing method is not so common in the field of machine that it is not known to widely. There are rarely researcher in this field because of non-effectiveness of magnetic abrasive. Therefore, in this paper we deals with the development of the magnetic abrasive with the use of Sr-Ferrite. In this development, abrasive grain A has been made by using the resin bond fabricated at low temperature. And magnetic abrasive powder was fabricated from the Sr-Ferrite which was crushed into 200 mesh. The XRD analysis result shows that only A abrasive and Sr-Ferrite crystal peaks were detected, explaining that resin bond was not any more to contribute chemical reaction. From SEM analysis, we found that A abrasive and Sr-Ferrite were strongly bonding with each other.
김희남,허웅,구만서,Kim, Hee-Nam,Heo, Woong,Gu, Man-Seo 한국안전학회 1991 한국안전학회지 Vol.6 No.2
In this paper, we study effect of waveness at the optical surface roughness measurement. In generally, waveness components cause errors in calculation of the roughness value of metal surface. We study about surface roughness signals In the frequency domain for separate two signal component of real roughness and waveness by digital signal processing methods. Thereafter, determine low and high Component of frequency spectrum. By this separating frequency value we design liner low and high pass filter which cutoff frequency is 1 Hz. After this process, converted each filtered spectrum by inverse discrete fourier transformation to time domain waveness and real roughness signals We calculate surface roughness value from filtered roughness signals. For evaluate this method, we use five specimens roughness signal which obtained from optical surface roughness measuring system in 3mm/s moving speed with 0.1 mm laser beam spot size As a result, we obtain more linerized roughness value than that of unfiltered roughness signals.
김희남 ( Hee Nam Kim ),김동욱 ( Dong Wook Kim ) 한국동굴학회 2006 동굴 Vol.70 No.-
The magnetic polishing is the useful method to finish using magnetic power of magnet. This method is one of precision polishing techniques and has an aim of the clean technology using for the pure of gas and inside of the clean pipe for transportation. The magnetic abrasive polishing method is not so common for machine that it is not spreaded widely. There are rarely researcher in this field because of non-effectiveness of magnetic abrasive. Therefore, in this paper deals with development of the magnetic abrasive using worthless mineral. In this development, abrasive grain WA and GC used to resin bond fabricated low temperature. And magnetic material was fabricated from the worthless mineral which were closed into 200 mesh grit type. The XRD analysis result show that only WA and GC abrasive and worthless mineral crystal peaks detected which explains resin bond was not any more chemical reaction. From SEM analysis it is found that WA and GC abrasive and worthless mineral were strong bonding with each other by bond.