http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김영춘,반성원,이건일 ( Young Choon Kim,Seong Won Ban,Kuhn Il Lee ) 한국센서학회 1997 센서학회지 Vol.6 No.2
In this paper, we propose an efficient coding method of remotely sensed satellite image using region classification and interband prediction. This method classifies each pixel vector considering spectral characteristics of satellite image data. Then we perform the classified intraband VQ to remove sp ti l (intraband) redundancy for a reference band image. To remove interband redundancy effectively, To perform the classified interband prediction for the remaining band images. Experiments on LAND AT TM satellite image show that coding efficiency of the proposed method is better than that of the conventional Gupta`s method.
에지 영역을 보상한 원격 센싱된 인공위성 화상의 부호화
김영춘,이건일 ( Young Choon Kim,Kuhn Il Lee ) 한국센서학회 1997 센서학회지 Vol.6 No.5
In this paper, we propose a coding method of remotely sensed satellite image with edge region compensation. This method classifies each pixel vector considering spectral reflection characteristics of satellite image data. For each class, we perform classified intraband VQ and classified interband prediction to remove intraband and interband redundancies, respectively. In edge region case, edge region is compensated using class information of neighboring blocks and gray value of quantized reference bands. Then we perform classsified interband prediction using compensated class information to remove interband redundancy, effectively. Experiments on LANDSAT TM satellite images show that coding efficiency of the proposed method is better than that of the conventional methods.
김영춘(Kim, Young-Choon),조문택(Cho, Moon-Taek),주해종(Joo, Hae-Jong) 한국산학기술학회 2013 한국산학기술학회논문지 Vol.14 No.2
본 논문에서는 정지시까지 전기제동을 하는 축소모형 추진시스템을 설계하고 제작하여 실험하였으며, 정지순 간 제동토오크의 제어방법을 제안하였다. 또한, 레졸바를 사용한 회전자의 위치와 속도를 추정하는 관측기에 의하여 극저속에서 속도를 검출하는 방법을 개발 하였으며, 또한 정지순간 제동 토오크의 감소와 동시에 공기 브레이크의 동작을 개시하여 블렌딩 제동을 사용하는 방 법과 비교하여, 정지시까지 전기제동만을 사용하는 향상된 제동방법을 제안하였다. In this paper, how to stop a moment to experiment with stop function, electric brake type scale model propulsion system is designed and fabricated by control of the braking torque is proposed. Scale model system for motor-driven, inertial load, the structure of the load for the motor and the inverter system was constructed with two sets of converters, the actual range of the rotational speed of the vehicle DDM experiments to be able to. In Additional, observer to estimate the rotor position and speed of using resolver, and the pole at low speed, speed detection methods have been developed. As a result of this study, first, stop the moment Second, the reduction of braking torque, and how to initiate the operation of the air brake blending by using the braking, improve braking methods that only use the electric brake to stop brought.
김영춘 ( Young Choon Kim ),어건주 ( Keon Joo Eo ),이성민 ( Sung Min Lee ) 대구가톨릭대학교 인문과학연구소 2015 인문과학연구 Vol.0 No.26
The purpose of this study is to consider whether vocabulary list of Russian curriculum was chosen appropriately. For this purpose, the study investigated the following factors: ① comparison among words in the russian curriculum`s basic vocabulary list, The Lexical Minimum of Russian as a Foreign Language, the russian textbook`s words, and words used in 7 previous national tests ② comparison of high-frequency words in the Russian national corpus. Based on the findings above, this study suggests that it would be an effective way to learn Russian if curriculum developers select vocabulary on the basis of frequency and usefulness. Because high-frequency words would have to be considered important because they have occurred far more times than other words in communications. But curriculum developers are able to choose low-frequency words if they are more efficient for the russian education. And this vocabulary list would be helpful for students to experience authentic russian learning.
반도체 테스트 핸들러 픽커 검사장비 프레임에 대한 진동해석
김영춘(Young-Choon Kim),김영진(Young-Jin Kim),김옥환(Ok-Hwan Kim),조재웅(Jae-Ung Cho) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
본 논문에서는 반도체 제조 공정에서 최종 검사 장비에 사용되고 있는 반도체 테스트 핸들러 픽커의 프레임에 대하여 유한요소해석 프로그램인 ANSYS를 이용하여 핸들러 픽커의 이동에 의해 프레임에 발생되는 진동을 시뮬레이션 해석하였다. 실제적인 진동으로서 본 모델에 구속조건을 주어, 장비에 생 기는 하모닉 진동해석을 하여 그 위험 진동수를 고찰하였다. 공진이 발생하는 위험 진동수인 80Hz에 서의 최대 변형량은 0.144mm로 나타났고 위험 진동수인 80Hz에서의 최대 등가 응력은 13.35MPa로 나타났다. 따라서 본 연구에서는 반도체 테스트 핸들러 픽커 검사장비의 진동 해석으로서 이 연구 결 과를 이용한다면 안전한 내구성을 가진 본 검사 장비의 모델 설계가 효율적으로 가능하다고 사료된다.
김영춘(Young-Choon Kim),이사영(Sa-Young Lee) 전력전자학회 2007 전력전자학술대회 논문집 Vol.- No.-
Converter that is dc source equipment source's phase by reference control function that detect source's phase because should be done compulsorily use. Source's phase detect method there be method that use source's ac voltage directly by signal, and use methods that voltage detects status by PLL method and so on via point that '0' becomes usually. All above methods to detect phase are using, wrong action of phase detector converter's ailment or converter of burn can. Ths paper compares and examined usable phase detection method in source's frequency fluctuation presuming source's frequency using obsever.
PCB 판에 대한 핀의 이동 공정에 따른 압입파괴 평가
김영춘(Kim, Young-Choon),김춘식(Kim, Choon-Sik),이희성(Lee, Evan),조재웅(Cho Jae-Ung) 한국산학기술학회 2014 한국산학기술학회논문지 Vol.15 No.12
기계적 체결 방식으로 볼트와 너트를 이용한 결합 방식과 리벳이나 핀이 널리 사용되고 있다. 압입 방식은 다른 생산방법에 비하여 쉽게 가공 가능하며 재료의 인성이 우수하다. 하지만 실제적으로 압입방식으로 생산하는 과정에서 균열 이 발생될 수 있는 경우가 많다. 따라서 본 연구에서는 CATIA 프로그램을 이용하여 핀이 PCB 판으로 들어가고 나가는 두 가지 경우의 모델을 만들고 ANSYS 프로그램을 이용하여 유한요소 해석을 수행하였다. Case 1 및 2의 경우에 핀이 PCB판에 들어갈 때, PCB판에서 작용되는 최대 하중은 각각 79.708N과 90.277N이다. 그리고 Case 1 및 2의 경우에, PCB판이 Pin에서 빠져나올 때의 최대 하중은 각각 63.783N과 33. 75N으로 각각 나타났다. 본 연구의 결과를 실제 압입 공정의 설계에 응용한다 면 그 파손방지 및 내구성을 평가하는 데에 활용이 클 것으로 사료된다. Assembly using a bolt and nut, and rivet or pin have been used widely for forming mechanical joints. The indent method is an easier process than other manufacturing techniques and the toughness of the material is excellent. On the other hand, there are many cases in which the cracks occur on the manufacturing process as the indent method. Therefore, two kinds of models, in which a pin goes into and out PCB plate in this study were developed using the CATIA program and finite element methods were performed using the ANSYS program. When a pin was passed through a PCB plate in cases 1 and 2, the maximum loads applied to the PCB plate were 79.708N and 90.277N, respectively. When the PCB plate came out of the pin in cases 1 and 2, the maximum loads were 63.783N and 33.75N, respectively. The damage prevention and durability can be improved by applying the study results to the design of real indentation.
전동기 극저속 운전을 위한 최소차원 부하토크·관성 관측기
김영춘(Kim, Young-Choon),김은기(Kim Eun-Gi),조문택(Cho, Moon-Taek) 한국산학기술학회 2006 한국산학기술학회논문지 Vol.7 No.4
본 논문에서는 전동기 시스템의 극저속 영역에서 안정적이고 동특성이 우수한 운전을 하기 위해 전차원상태 관측기로부터 추정되는 속도정보를 입력으로 하는 최소차원 토크·관성관측기를 구성하여 부하외란과 관성을 피드포워드 제어를 함으로써 극저속영역에 대한 강인성을 갖도록 한다. 제시한 제어 알고리즘을 MA TLAB SIMULINK를 통해 전체 시스템을 모델링하고 실험을 통해 극저속에서 속도 추정 능력이 향상됨을 확인 한다. In this paper, an instantaneous speed observer with a reduced order is proposed to implement an indirect control for a motor with excellent dynamic stability and performance in a very low speed region. The proposed observer can estimate the instantaneous speed in very low speed region and simplify the system configuration by adopting an least order load torque-inertia observer to estimate the load torque and the motor speed. Simulation are carried out to illustrate the performance of the proposed estimator at very low speed.