http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Throughput of V-BLAST System using Hybrid ARQ in Correlated Fading Channels
김봉회(Bonghoe Kim),황승훈(Seung-Hoon Hwang) 대한전자공학회 2008 電子工學會論文誌-TC (Telecommunications) Vol.45 No.1
본 논문에서는 H-ARQ를 위한 NACK 신호를 이용한 안테나 스위칭 방식을 제안하고 V-BLAST 시스템에서 분석하였다. 여기서 전송 안테나는 재전송시 번갈아 스위칭 되어 동작한다. 상관된 페이딩 채널에서 제안된 방식의 채널 용량을 해석적으로 분석함으로써, 채널 상관성의 악영향이 안테나 스위칭 방식으로 줄어듦을 보인다. 시뮬레이션 결과를 통해 상관된 페이딩 채널에서 평균 수율은 큰 복잡도의 증가 없이 개선되어질 수 있음을 보인다. In this paper, an antenna-switching scheme using negative acknowledgement for hybrid automatic repeat request (H-ARQ) is proposed and analyzed in the Vertical Bell Labs Layered Space-Time (V-BLAST) system, in which the transmit antenna is alternatively switched under retransmission. By analytically evaluating the channel capacity of the proposed scheme over correlated fading channels, it is shown that the adverse effect of the channel correlation is alleviated by the antenna switching scheme. Simulation results demonstrate that the average throughput may be improved in a correlated fading channel without adding much complexity to the process.
단일포톤계수형 센서를 위한 CMOS readout 설계
황윤금(Yoon-Geum Hwang),전성채(Sungchae Jeon),김봉회(Bonghoe Kim),송광섭(Kwang-Soup Song),이동훈(Donghoon Lee),허영(Young Huh),하판봉(Pan-Bong Ha),김영희(Young-Hee Kim) 대한전기학회 2009 정보 및 제어 심포지엄 논문집 Vol.2009 No.10
본 논문에서는 의료용 x-선 영상검출을 위한 단일 포톤계수형 망식의 readout을 설계하고 개발한 내용에 대해 논하였다. 포톤계수형 readout 방식은 기존의 x-선 검출 방식(Charge integrating)과는 다르게, 입사되는 개개의 포톤을 계수하여 검출하는 방식이다. 미세한 x-선 신호를 검출하기 위하여 저 잡음 특성과 10?(㎐/㎟) 이상의 counting rate가 요구되어진다. 구현된 각 픽셀은 포톤계수형 동작을 위하여 Preamplifier, Discriminator, Counter,로 구성 되어져있다. Preamplifier는 자체바이어스 Folded cascode OPAMP를 채용한 CSA(Charge Sensitive Amplifier)로 구현하였고, 광자의 신호를 구분하기 위한 Discriminator는 칩 내외부에서 입력할 수 있도록 설계하였다. Counter는 신호의 펄스를 계수하는 counting mode와 저장된 데이터를 외부로 출력하는 readout (shift register)의 동작을 수행한다. 이러한 동작 수행을 위하여 고속 동작이 가능하며 layout 면적이 작은 LFSR(Linear Feedback Shift Resister) counter를 이용하여 설제하였다. 설계된 포톤계수형 readout는 100㎛×100㎛ 픽셀크기, 50㎛×50㎛ bump bonding용 패드, 15bit counting bit, 32×32개의 픽셀로 이루어져 있으며, 4-metal 0.18㎛ triple-well CMOS 공정을 이용하여 제작하였다.
허영(Young Huh),전성채(Sungchae Jeon),이동훈(Dong Hoon Lee),김봉회(Bonghoe Kim),황윤금(Yoon Geum Hwang),서창우(Changwoo Seo),차보경(Bo Kyung Cha),마미연(Mi Yeon Ma) 대한전자공학회 2010 대한전자공학회 학술대회 Vol.2010 No.6
Our imaging system called 3D CT(Computed Tomography)-fluoroscopy system which has developed through our project is a mobile x-ray system designed for interventional radiology to assist physician and diagnostic evaluation. Traditionally, spine surgery patients have had preoperative imaging procedures such as CT scans, MRIs, and x-ray to provide diagnostic information to the surgeon. Especially, 2D-fluoroscopy using C-arm has been the standard work horse for intra-operative spine and orthopedic imaging for decades, among other. But x-rays with conventional C-arm show only 2D fluoroscopy image during surgery. Compared to these, CT-fluoroscopy system provide a 2D real time image(fluoroscopy-like) and 3D image of spinal anatomy(CT-like). The system uses a state-of-the-art flat-panel detector as x-ray detection and cone-beam based CT realization. The authors provide some introduction of development of this technology.