http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김덕민(Duk-Min Kim),남준엽(Junyeop Nam),이형진(Hyoung Jin Lee),노경호(Kyung-Ho Noh),이대연(Daeyeon Lee),강동기(Dong-Gi Kang) 한국항공우주학회 2020 韓國航空宇宙學會誌 Vol.48 No.11
반경험식과 상용 전산해석도구를 이용하여 비행 속도 및 챔버 압력에 따른 유도무기의 기저항력을 예측하였으며, 두 해석 결과는 대체적으로 일치함을 보였다. 노즐에 의한 분사 제트의 과대/과소 팽창에 따라 기저부의 유동 특성과 기저항력의 차이가 관찰되었다. 과대팽창 조건에서는 기저부 상단에 팽창파가 발생되면서 기저부의 압력이 감소하였으며, 외부 자유류의 마하수가 증가함에 따라 팽창파의 강도가 강해지면서 기저부 압력 더욱 감소하였다. 과소 팽창 조건에서는 노즐 후류의 영향으로 기저부 주위에 충격파가 발생하고 이로 인해 기저부 압력이 증가하였으며, 챔버의 압력이 증가할수록 그 영향이 크게 나타났다. 동일 챔버 압력 조건에서는 자유류 마하수가 증가함에 따라 기저부에서 생성되는 충격파가 하류로 이동하면서 기저 압력이 감소하는 특성이 관찰되었다. The semi-empirical equation and commercial computational tool were used to predict the base drag of a guided missile with free-stream Mach numbers and chamber pressures, and the results were generally agree each other. Differences in flow characteristics and base drags were observed with over/under expansion conditions by the nozzle. Under the over-expansion condition, the base pressure decreased as the expansion fan was generated at upper region of the base, and base pressure decreased further with increasing free-stream Mach number as the expansion becomes strong. Under the under-expansion conditions, a shock wave was generated around the base by the influence of the nozzle flow, which increased the base pressure, and the effect increased as the chamber pressure increased. Under the same chamber pressure condition, as the free-stream Mach number increases, the characteristic that the base pressure decreases as the shock wave generated at the base moves downstream was observed.
제강슬래그 복합매질체를 이용한 철 유입에 따른 광산배수내 망간 제거효율 평가
김동관,지원현,김덕민,박현성,오연수,Kim, Dong-Kwan,Ji, Won Hyun,Kim, Duk-Min,Park, Hyun-Sung,Oh, Youn Soo 대한자원환경지질학회 2018 자원환경지질 Vol.51 No.5
폐광산에서 유출되는 광산배수 내 중금속을 처리하기 위해 자연정화법 및 물리화학처리 등 다양한 방법이 사용되고 있다. 특히 광산배수 내 중금속 중 망간은 처리되기 위해 pH 9 이상의 조건이 필요하기 때문에 처리하기 어려운 원소 중 하나이다. 본 연구에서는 광산배수 내 망간의 효율적인 제거방법을 연구하기 위해 다양한 제강슬래그 복합매질체 반응조(제강슬래그(S), 제강슬래그+석회석(S+L), 제강슬래그+망간코팅자갈(S+G))를 사용하여 경쟁원소인 철 유입에 따른 망간의 제거효율을 평가하였다. 철 유입이 없는 358일간의 실험에서는 평균 pH 6.7의 고농도 망간(30~50 mg/L)이 포함된 원수를 사용했으며 제강슬래그 반응조 유출수는 pH 8.9~11.4에서 평균 99.9%의 지속적으로 높은 망간제거효율을 보였다. 철 유입 없이 망간제거실험을 진행한 반응조를 이용하여 망간농도 40~60 mg/L의 원수에 철을 추가로 유입하여 237일간의 실험을 진행하였다. 망간 제거 이후 pH는 6.1~10.0 범위로 증가하였으며 철 유입 전에 비해 낮은 범위를 보였다. S반응조가 pH 7.1~9.9로 가장 높았으며 S+L 반응조, S+G 반응조가 그 뒤를 이었다. 하지만 망간제거효율은 비교적 낮은 pH 범위임에도 불구하고 S+L 반응조가 94~100%로 가장 높았으며 S반응조와 S+G 반응조는 약 68~100%의 범위의 효율을 보였다. S+L반응조가 철 유입에 가장 높은 저항성을 나타냈으며 이는 pH 이외에도 석회석에 의해 공급된 탄산염에 의한 $MnCO_3$의 형성 또는 자가촉매반응이 망간제거에 기여했다고 판단할 수 있다. X선 회절 분석을 통해 S+L 반응조 침전물에서 로도크로사이트(rhodochrosite, $MnCO_3$)를 확인할 수 있었다. 광산배수 내 망간을 처리하는데 가장 효율적인 반응조는 제강슬래그+석회석 반응조로 나타났으며, 본 연구결과는 철의 유입에 따른 비교적 낮은 pH(9 이하) 범위에서도 망간이 효율적으로 제거될 수 있는 공법을 선정하는데 기여 할 수 있다. For the treatment of heavy metals in the mine drainage from the closed mine area, various methods such as passive, active and semi-active treatments are considered. Among contaminated elements in the mine drainage, Mn is one of the difficult elements for the treatment because it needs high pH over 9.0 for its concentration to be reduced. In this study, the efficiency of various slag complex reactors (slag (S), slag+limestone (SL) and slag+Mn coated gravel (SG)) on Mn removal in the presence of Fe, which is a competitive element with Mn, was evaluated to investigate effective methods for the treatment of Mn in mine drainage. As a result of experiments on Mn removal without Fe during 358 days, using influent with $30{\sim}50Mn{\cdot}mg/L$ and pH 6.7 on the average, S reactor showed continuously high Mn removal efficiency with the average of 99.9% with pH 8.9~11.4. Using the same reactors, Mn removal experiments with Fe during 237 days were conducted with the influent with $40{\sim}60Mn{\cdot}mg/L$. The pH range of effluent reached to 6.1~10.0, which is slightly lower than that of effluent without Fe. S reactor showed the highest range of pH with 7.1~9.9, followed by S+L and S+G reactor. However, the efficiency of Mn removal showed S+L>S>S+G with the range of 94~100%, 68~100% and 68~100%, respectively in spite of relatively low pH range. S+L reactor showed the most resistance on Fe input, which means other mechanisms such as $MnCO_3$ formation by the carbonate prouced from the limestone or autocatalysis reaction of Mn contributed to Mn removal rather than pH related mechanisms. The evidence of reactions between carbonates and Mn, rhodochrosite ($MnCO_3$), was found from the X-ray diffraction analysis of precipitates sample from S+L reactor. From this study, the most effective reactors on Mn removal in the presence of Fe was S+L reactor. The results are expected to be applied for the Mn containing mine water treatment in the presence of Fe within the relatively low range of pH.