http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
저온 고체산화물연료전지 구현을 위한 다층 나노기공성 금속기판의 제조
강상균,박용일,Kang, Sangkyun,Park, Yong-Il 한국세라믹학회 2005 한국세라믹학회지 Vol.42 No.12
Submicron thick solid electrolyte membrane is essential to the implementation of low temperature solid oxide fuel cell, and, therefore, development of new electrode structures is necessary for the submicron thick solid electrolyte deposition while providing functions as current collector and fuel transport channel. In this research, a nickel membrane with multi-stage nano hole array has been produced via modified two step replication process. The obtained membrane has practical size of 12mm diameter and $50{\mu}m$ thickness. The multi-stage nature provides 20nm pores on one side and 200nm on the other side. The 20nm side provides catalyst layer and $30\~40\%$ planar porosity was measured. The successful deposition of submicron thick yttria stabilized zirconia membrane on the substrate shows the possibility of achieving a low temperature solid oxide fuel cell.
변전소내 지역정보를 이용하여 안정도 향상을 위한 실시간 OLTC 및 커패시터 협조제어 알고리즘
강상균,Kang, Sang-Gyun 한국산업정보학회 2012 한국산업정보학회논문지 Vol.17 No.7
본 논문은 변전소 내에서 취득된 데이터만을 이용하여 전계통 전압안정도를 확보하기 위한 실시간 변전소내 OLTC(On-Load Tap Changer)와 S.S(Switched Shunt)와의 협조제어 알고리즘을 제안하고자 한다. 전압레벨을 일정한 값으로 유지시키기 위해서 동작하는 OLTC의 제어를 잘못하게 된다면 오히려 계통의 안정도(전압안정도) 를 해치는 결과를 나타낼 수 있다. 이 논문에서는 단일 변전소에서 취득된 데이터만으로 전체 시스템의 상태를 판단할 수 있는 Z-index를 이용하였다. Z-index를 이용하여 시스템을 normal 상태와 abnormal 상태로 구분하였고, 각 상태에 따른 협조제어 알고리즘을 제안하였다. 알고리즘 검증을 위해서 Hypersim과 matlab simulink를 이용하였다. This paper suggest the on-line coordination control between on-load tap changers and Switched Shunts for ensuring the voltage stability using local data obtained from one substation. Inappropriate control of on-load tap changers that are able to maintain voltage profile might cause unintended result that is harmful to system stability, especially voltage stability. This paper utilizes Z-index that could inform the whole system condition from only one substation data. Simulation is performed using the HYPERSIM that is a digital simulator and matlab simulink to confirm the proposed algorithm.
10kW 급 풍력 블레이드의 수동형 피치제어 모듈의 설계를 위한 여러가지 익형의 공력 특성에 관한 연구
강상균(Sang Kyun Kang),이지현(Ji Hyun Lee),이장호(Jang-Ho Lee) 대한기계학회 2014 大韓機械學會論文集A Vol.38 No.6
풍력터빈 블레이드의 가변 피치제어는 풍력발전기의 과풍속 영역 설계에 있어 중요한 요소로 알려져 있으나 원가문제 때문에 소형 풍력터빈에는 적용되지 못하고 실속제어가 많이 적용되고 있다. 하지만, 블레이드 주변의 난류 때문에 설계된 실속이 구현되지 않는 실속지연 현상이 종종 발생되고, 이에 따른 풍력 블레이드의 과회전과 발전기의 과출력 위험이 발생하고 있다. 이에 따라 블레이드에서 발생되는 공력으로 피치가 변하고 스프링의 복원력으로 복귀되는 수동형 피치제어 모듈이 주목 받고 있다. 본 연구에서는 회전하는 블레이드의 익형에서 발생되는 양력과 항력을 이용하여 회전면으로 작용되는 토크와 블레이드의 Flap 방향으로 작용되는 추력을 계산하는 방법을 제시하고, 이러한 힘들의 크기를 여러 가지 익형에 대해 비교하였으며, 블레이드의 피치모멘트를 정량적으로 산출하여 수동 피치제어 모듈의 설계자료로 활용될 수 있도록 하였다. Even though the variable pitch control of a wind turbine blade is known as an effective component for power control over the rated wind speed, it has limited applicability to small wind turbines because of its relatively high cost on the price of small wind turbine. Instead, stall control is generally applied in the blade design without any additional cost. However, stall delay can frequently be caused by high turbulence around the turbine blade, and it can produce control failures through excessive rotational speed and overpowering the electrical generator. Therefore, a passive pitch control module should be considered, where the pitch moves with the aerodynamic forces of the blade and returns by the elastic restoring force. In this study, a method to calculate the pitch moment, torque, and thrust based on the lift and drag of the rotating blade wing was demonstrated, and several effective wing shapes were reviewed based on these forces. Their characteristics will be estimated with variable wind speed and be utilized as basic data for the design of the passive pitch control module.
군산시 말도 지역의 바람자원을 활용한 와이블분포 추정 방법들의 비교 분석 연구
강상균(Sangkyun Kang),유성호(Sungho You),이대용(Daeyong Lee),이장호(Jang-ho Lee) 한국신재생에너지학회 2021 한국신재생에너지학회 학술대회논문집 Vol.2021 No.7
풍속이 어느 특정 풍속 v일 확률을 표시하는 와이블분포는 풍력발전기 설치 이전에 바람의 특성을 확인하기 위해 필수로 진행된다. 이러한 와이블분포는 형상계수와 척도계수 두 가지 파라미터로 결정되며, 이를 추정하는 다양한 방법이 존재한다. 보다 신뢰성 있는 와이블분포 추정을 위해 수많은 연구가 이루어졌으나, 여러 연구자들에 의해 서로 다른 결론이 도출되고 있다. 이는 서로 다른 측정 장소, 측정 높이, 측정 기간, 측정 방법 등이 연구마다 서로 다르기 때문이다. 따라서 본 연구에서는 동일한 위치, 높이 측정 방법으로 군산 말도에서 수년 동안 측정된 바람자원을 활용하여, 여러 가지 방법으로 와이블 파라미터를 추정하고, 비교 분석되었다. 이를 통해 다양한 와이블분포 추정 방법 중 신뢰성 있는 추정 방법을 제안하고, 추후 보다 효율적으로 와이블분포를 추정하고자 한다.