http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
공극 변화에 따른 팬케이크형 고온초전도 마그넷의 특성 변화
강명훈(Myunghun Kang),구명환(Myunghwan Ku),이희준(Heejoon Lee),차귀수(Gueesoo Cha) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
고온초전도 마그넷은 저온초전도 마그넷과 달리 초전도선의 형태로 인한 이방성 때문에 마그넷의 형상에 따라 특성이 달라진다. 본 연구에서는 팬케이크 권선형 고온초전도 마그넷의 형상을 결정하는 요소 중에서 팬케이크 권선 사이의 공극 변화에 따른 특성을 계산하였다. 계산결과 최대의 중심자장을 발생하는 최적의 공극이 있음을 확인하 였으며, 공극을 둠으로써 자장의 균일성도 향상됨을 확인하였다.
마그넷 형상에 따른 고온초전도 마그넷의 에너지와 인덕턴스
강명훈(Myunghun Kang),김영민(Youngmin Kim),구대관(Daekwan Ku),백경호(Kyoungho Paik),차귀수(Gueesoo Cha) 대한전기학회 2011 전기학회논문지 Vol.60 No.6
When the aspect ratio of a magnet varies, the magnetic field in the magnet also varies. The critical current of a tape-shaped HTS wire varies with the direction and magnitude of applied magnetic field. Consequently when the aspect ration of a HTS magnet varies, the critical current of a HTS magnet varies. This paper shows the relation between the aspect ratio of a magnet and the energy and inductance of a HTS magnet. The critical current is also shown at various aspect ratio of the magnet. The length of the HTS wire, inner diameter of the magnet, and number of pancake are chosen to be variables which varies the shape of the magnet. For a HTS magnet consisting of pancake windings, calculation results show the number of pancake windings are the prime factor which varied the energy and inductance of the magnet. The inner diameter of the magnet varies the energy and inductance of the magnet a little.
전계를 이용한 팬케이크 권선으로 제작되는 마그넷의 임계전류 산정
강명훈(Myunghun Kang),구명환(Myunghwan Koo),이희준(Heejoon Lee),차귀수(Gueesoo Cha) 대한전기학회 2009 전기학회논문지 Vol.58 No.3
The method to determine the operating current of HTS magnets needs to be different from that of LTS magnets. This paper presented estimation of the critical current of pancake windings. The pancake windings can be excited by a single power source or by multiple power sources. Critical currents were determined by using field dependent E-J relation. For the better estimation of the critical current, a new method to define the magnetic field of the HTS wire has been proposed. Calculated critical currents of pancake windings were compared with measured ones of the HTS BSCCO magnet consisting of 10 pancake windings. According to the test results, the estimated critical currents of pancake windings agreed well with that of measured ones. Effects of the single and multiple power source excitation on the critical currents have been also examined.
도전성이 높은 안정화층을 고려한 YBCO 선재의 전송전류 손실 해석
강명훈(Myunghun Kang),한병욱(Byungwook Han),정두영(Duyoung Jung),임희현(Heehyun Lim),임형우(Hyoungwoo Lim),차귀수(Gueesoo Cha),이희준(Heejoon Lee) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.10
YBCO wire has a metal substrate to improve the texture structure and highly conductive layers to increase the cryogenic stability. When AC current flows in the YBCO wire, magnetic field which is generated by the AC current magnetizes the metal substrate and induces the eddy current in the stabilizing layer. To examine the effect of the metal substrate and the conducting layer on the transport current loss of YBCO wire, this paper presents the transport current loss of YBCO wire which has metal substrate and conductive layer. YBCO wire with Nj-W substrate and copper layer were chosen as the model HTS wire for numerical calculation. Finite element method has been used to calculate the transport loss and the results of numerical calculation was compared with analytic calculation suggested by Norris.
초전도선의 길이에 따른 고온초전도 마그넷의 중심자장 특성
강명훈(Myunghun Kang),구대관(Daekwan Ku),이희준(Heejoon Lee),차귀수(Gueesoo Cha) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
고자장을 필요로 하는 NMR, MRI 또는 자기분리 마그넷의 경우 고자장을 발생시키기 위해 권선되는 초전도선의 길이를 적절하게 산정하여 마그넷을 설계한다. 본 연구에서는 고자장 마그넷 설계시 중요한 요소인 초전도선의 길이에 따른 고온초전도 마그넷의 중심자장 특성을 연구하였다. 고온초전도선의 길이를 2 ㎞부터 30 ㎞까지 변화를 주어 중심자장이 최대가 되게 하는 최적의 형상비를 계산하고 중심자장 및 임계전류 특성을 연구하였다. 그 결과 마그넷 설계시 중심자장을 최대가 되게 하는 최적의 형상비가 있음을 확인하였으며 초전도선의 길이에 따른 마그넷 설계의 효율성 및 경제성을 확인했다.
구명환(Myunghwan Ku),강명훈(Myunghun kang),박주경(Jugyeong Park),김동희(Dong Hee Kim),최종식(Jong Sik Choi),차귀수(Gueesoo Cha) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
본 논문에서는 일반산업용 개방형 전류측정기의 개발 과정을 기술한다. 개방형 전류측정기는 자성코 어, 홀센서, 증폭회로로 구성되고 도선이 C-type의 자성코어를 통과하는 구조이다. 도선에 전류가 흐 를 때 자성코어의 공극에 발생하는 자장을 홀센서로 측정하고 홀센서의 출력을 증폭하여 도선의 전류 에 비례하는 출력전압을 얻는다. 전류 측정범위는 –100∼100A이고 직류, 교류전류 모두 측정가능하 다. 동작 온도 범위는 –35∼100˚C이고 온도에 따라 변하는 출력특성을 보상하기 위해 부 온도계수 특 성의 서미스터를 사용한다.
고온초전도 BSCCO 팬케이크 권선에 인가되는 자장과 임계전류의 산정
具明煥(Myunghwan Koo),姜明勳(Myunghun Kang),李喜俊(Heejoon Lee),車貴守(Gueesoo Cha) 대한전기학회 2008 전기학회논문지 Vol.57 No.11
Critical current of the superconducting machines is limited by the magnetic field. When the magnetic field is not uniform, it is difficult to estimate the magnetic field and the critical current. This paper proposed a method for the estimation of tile magnetic field and the critical current of the HTS pancake windings which can be used to generate the high field magnet. A parameter which was needed to calculate the critical current of a BSCCO magnet with 10 pancake windings was obtained by tile experiment. Test which was carried out by using single pancake winding and magnet consisting of 10 pancake windings shows the proposed method can be an effective method for the estimation of the critical current of pancake windings.
수치해석을 이용한 BSCCO 적층 선재들의 외부자장 변화에 따른 DC 통전 특성 계산
임형우(Hyoungwoo Lim),강명훈(Myunghun Kang),차귀수(Gueesoo Cha),이희준(Heejoon Lee) 대한전기학회 2007 대한전기학회 학술대회 논문집 Vol.2007 No.10
This paper has presented the numerical calculation of fundamental characteristics of the HTS wire by using commercial software. Numerical calculation of the HTS wire's characteristics is able to reduce the time and effort which need to be exerted to obtain those values experimentally. Results of numerical calculation, such as, critical current of the single and the multi-stacked wire under external magnetic field, were compared with that of experimental results.
고온초전도마그넷에서 팬케이크 권선 사이의 공극 변화에 따른 중심자장 특성
구명환(Myunghwan Ku),강명훈(Myunghun Kang),김영민(Youngmin Kim),이희준(Heejoon Lee),차귀수(Gueesoo Cha) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.10
An air gap between the pancake windings was provided in this paper to increase the central magnetic field of an HTS magnet consisting of pancake windings. Unlike the LTS magnet, providing an air gap between the pancake windings increased the central magnetic field of an HTS magnet. Futhermore, the uniformity of the magnetic field near the center of the magnet increased because the pancake windings spread out in wider area. Effects of the air gap on the central magnetic field of an HTS magnet was described in this paper. Calculation of the critical current was carried out by using E-J relation of the HTS wire and the optimization technique was adopted to obtain the appropriate critical current which could maximize the central magnetic field. Pancake windings with BSCCO-2223 HTS tape and Glass Epoxy bobin. six pancake windings with 100 turns were used to constructed HTS magnet. Characteristics of the HTS magnet, such as, central magnetic field were measured.