Establishment and application of a solid-phase blocking ELISA method for detection of antibodies against classical swine fever virus

Cao, Yuying,Yuan, Li,Yang, Shunli,Shang, Youjun,Yang, Bin,Jing, Zhizhong,Guo, Huichen,Yin, Shuanghui 대한수의학회 2022 Journal of Veterinary Science Vol.23 No.3

Background: Classical swine fever (CSF) is a severe infectious disease of pigs that causes significant economic losses to the swine industry. Objectives: This study developed a solid-phase blocking enzyme-linked immunosorbent assay (spbELISA) method for the specific detection of antibodies against the CSF virus (CSFV) in porcine serum samples. Methods: A spbELISA method was developed based on the recombinant E2 expressed in Escherichia coli. The specificity of this established spbELISA method was evaluated using reference serum samples positive for antibodies against other common infectious diseases. The stability and sensitivity were evaluated using an accelerated thermostability test. Results: The spbELISA successfully detected the antibody levels in swine vaccinated with the C-strain of CSFV. In addition, the detection ability of spbELISA for CSFV antibodies was compared with that of other commercial ELISA kits and validated using an indirect immunofluorescence assay. The results suggested that the spbELISA provides an alternative, stable, and rapid serological detection method suitable for the large-scale screening of CSFV serum antibodies. Conclusions: The spbELISA has practical applications in assessing the vaccination status of large pig herds.

Establishment and application of a solid-phase blocking ELISA method for detection of antibodies against classical swine fever virus

Yuying Cao,Li Yuan,Shunli Yang,Youjun Shang,Bin Yang,Zhizhong Jing,Hui-Chen Guo,Shuanghui Yin 대한수의학회 2022 Journal of Veterinary Science Vol.23 No.5

Background: Classical swine fever (CSF) is a severe infectious disease of pigs that causes significant economic losses to the swine industry. Objectives: This study developed a solid-phase blocking enzyme-linked immunosorbent assay (spbELISA) method for the specific detection of antibodies against the CSF virus (CSFV) in porcine serum samples. Methods: A spbELISA method was developed based on the recombinant E2 expressed in Escherichia coli. The specificity of this established spbELISA method was evaluated using reference serum samples positive for antibodies against other common infectious diseases. The stability and sensitivity were evaluated using an accelerated thermostability test. Results: The spbELISA successfully detected the antibody levels in swine vaccinated with the C-strain of CSFV. In addition, the detection ability of spbELISA for CSFV antibodies was compared with that of other commercial ELISA kits and validated using an indirect immunofluorescence assay. The results suggested that the spbELISA provides an alternative, stable, and rapid serological detection method suitable for the large-scale screening of CSFV serum antibodies. Conclusions: The spbELISA has practical applications in assessing the vaccination status of large pig herds.

Preparation and In Vitro Characterization of Gelatin Methacrylate for Corneal Tissue Engineering

Yan Yayun,Cao Yanyan,Cheng Rong,Shen Zhizhong,Zhao Yajing,Zhang Yixia,Zhou Guohong,Sang Shengbo 한국조직공학과 재생의학회 2022 조직공학과 재생의학 Vol.19 No.1

BACKGROUND: Corneal disease is second only to cataract considered as the leading cause of blindness in the world, with high morbidity. Construction of corneal substitutes in vitro by tissue engineering technology to achieve corneal regeneration has become a research hotspot in recent years. We conducted in-depth research on the biocompatibility, physicochemical and mechanical properties of rat bone marrow mesenchymal stem cells (rBM-MSCs)-seeded gelatin methacrylate (GelMA) as a bioengineered cornea. METHODS: Four kinds of GelMA with different concentrations (7, 10, 15 and 30%) were prepared, and their physicchemical, optical properties, and biocompatibility with rBM-MSCs were characterized. MTT, live/dead staining, cell morphology, immunofluorescence staining and gene expression of keratocyte markers were performed. RESULTS: 7%GelMA hydrogel had higher equilibrium water content and porosity, better optical properties and hydrophilicity. In addition, it is more beneficial to the growth and proliferation of rBM-MSCs. However, the 30%GelMA hydrogel had the best mechanical properties, and could be more conducive to promote the differentiation of rBM-MSCs into keratocyte-like cells. CONCLUSION: As a natural biological scaffold, GelMA hydrogel has good biocompatibility. And it has the ability to promote the differentiation of rBM-MSCs into keratocyte-like cells, which laid a theoretical and experimental foundation for further tissue-engineered corneal stromal transplantation, and provided a new idea for the source of seeded cells in corneal tissue engineering.

Does matching relation exist between the length and the tilting angle of terminal implants in the all-on-four protocol? stress distributions by 3D finite element analysis

Li, Xiaomei,Cao, Zhizhong,Qiu, Xiaoqian,Tang, Zhen,Gong, Lulu,Wang, Dalin The Korean Academy of Prosthodonitics 2015 The Journal of Advanced Prosthodontics Vol.7 No.3

PURPOSE. To explore whether there is matching relation between the length and the tilting angle of terminal implants in the All-on-Four protocol by studying the effects of different implant configurations on stress distributions of implant, bone, and framework. MATERIALS AND METHODS. Four implants were employed to support a full-arch fixed prosthesis and five three-dimensional finite element models were established with CT images, based on the length (S and L) and distal tilt angle ($0^{\circ}$, $30^{\circ}$ and $45^{\circ}$) of terminal implants for an edentulous mandible, which named: Tilt0-S, Tilt30-S, Tilt30-L, Tilt45-S and Tilt45-L. An oblique 240 N was loaded at second molar. The von Mises Stresses were analyzed. The implants were consecutively named #1 to #4 from the loading point. RESULTS. 1) Tilt0-S had the greatest stress on the implants, with the other groups exhibiting variable reductions; the four implants of Tilt45-L demonstrated the greatest reduction in stress. 2) Tilt0-S had the greatest stress at bone around #1 implant neck, and Tilt45-L exhibited the least stress, which was a 36.3% reduction compared to Tilt0-S. 3) The greatest stress in the framework was found on the cantilevers distal to #1 implant. Tilt45-S exhibited the least stress. CONCLUSION. Matching different length and tilting angle of the terminal implants led to variable stress reductions on implants, bone and the superstructure. By optimizing implant configuration, the reduction of stress on implants and surrounding bone could be maximized. Under the present condition, Tilt45-L was the preferred configuration. Further clinical testings are required.

3D Bioprinted GelMA/PEGDA Hybrid Scaffold for Establishing an In Vitro Model of Melanoma

( Jiahui Duan ),( Yanyan Cao ),( Zhizhong Shen ),( Yongqiang Cheng ),( Zhuwei Ma ),( Lijing Wang ),( Yating Zhang ),( Yuchuan An ),( Shengbo Sang ) 한국미생물생명공학회 2022 Journal of microbiology and biotechnology Vol.32 No.4

Due to the high incidence of malignant melanoma, the establishment of in vitro models that recapitulate the tumor microenvironment is of great biological and clinical importance for tumor treatment and drug research. In this study, 3D printing technology was used to prepare GelMA/PEGDA composite scaffolds that mimic the microenvironment of human malignant melanoma cell (A375) growth and construct in vitro melanoma micro-models. The GelMA/PEGDA hybrid scaffold was tested by the mechanical property, cell live/dead assay, cell proliferation assay, cytoskeleton staining and drug loading assay. The growth of tumor cells in two- and three-dimensional culture systems and the anti-cancer effect of luteolin were evaluated using the live/dead staining method and the Cell Counting Kit-8 (CCK-8) method. The results showed a high aggregation of tumor cells on the 3D scaffold, which was suitable for long-term culture. Cytoskeleton staining and immunofluorescent protein staining were used to evaluate the degree of differentiation of tumor cells under 2D and 3D culture systems. The results indicated that 3D bioprinted scaffolds were more suitable for tumor cell expansion and differentiation, and the tumor cells were more aggressive. In addition, luteolin was time- and dose-dependent on tumor cells, and tumor cells in the 3D culture system were more resistant to the drug.

Does matching relation exist between the length and the tilting angle of terminal implants in the all-on-four protocol? stress distributions by 3D finite element analysis

Zhen Tang,Lulu Gong,Dalin Wang,Xiaoqian Qiu,Zhizhong Cao,Xiaomei Li 대한치과보철학회 2015 The Journal of Advanced Prosthodontics Vol.7 No.3

PURPOSE To explore whether there is matching relation between the length and the tilting angle of terminal implants in the All-on-Four protocol by studying the effects of different implant configurations on stress distributions of implant, bone, and framework. MATERIALS AND METHODS Four implants were employed to support a full-arch fixed prosthesis and five three-dimensional finite element models were established with CT images, based on the length (S and L) and distal tilt angle (0°, 30° and 45°) of terminal implants for an edentulous mandible, which named: Tilt0-S, Tilt30-S, Tilt30-L, Tilt45-S and Tilt45-L. An oblique 240 N was loaded at second molar. The von Mises Stresses were analyzed. The implants were consecutively named #1 to #4 from the loading point. RESULTS 1) Tilt0-S had the greatest stress on the implants, with the other groups exhibiting variable reductions; the four implants of Tilt45-L demonstrated the greatest reduction in stress. 2) Tilt0-S had the greatest stress at bone around #1 implant neck, and Tilt45-L exhibited the least stress, which was a 36.3% reduction compared to Tilt0-S. 3) The greatest stress in the framework was found on the cantilevers distal to #1 implant. Tilt45-S exhibited the least stress. CONCLUSION Matching different length and tilting angle of the terminal implants led to variable stress reductions on implants, bone and the superstructure. By optimizing implant configuration, the reduction of stress on implants and surrounding bone could be maximized. Under the present condition, Tilt45-L was the preferred configuration. Further clinical testings are required.

One-Step Engineering of a Stable, Selectable Marker-Free Autoluminescent Acinetobacter baumannii for Rapid Continuous Assessment of Drug Activity

( Huofeng Jiang ),( Yamin Gao ),( Sheng Zeng ),( Shuai Wang ),( Zhizhong Cao ),( Yaoju Tan ),( Huancai Yin ),( Jianxiong Liu ),( Tianyu Zhang ) 한국미생물생명공학회(구 한국산업미생물학회) 2019 Journal of microbiology and biotechnology Vol.29 No.9

The rising cases of multidrug-resistant Acinetobacter baumannii (Ab) and the lack of effective drugs call for quick attention. Here, based on a Tn7 transposon and Xer/dif system, we constructed a stable, selectable marker-free autoluminescent Ab capable of producing visible light without extra substrates. Utilization of this autoluminescent reporter strain has the potential to reduce the time, effort and costs required for the evaluation of activities of anti-Ab drug candidates in vitro.