Hybrid medium model for conjugate heat transfer modeling in the core of sodium-cooled fast reactor

Wang, X.A.,Zhang, Dalin,Wang, Mingjun,Song, Ping,Wang, Shibao,Liang, Yu,Zhang, Yapei,Tian, Wenxi,Qiu, Suizheng,Su, G.H. Korean Nuclear Society 2020 Nuclear Engineering and Technology Vol.52 No.4

Core-wide temperature distribution in sodium-cooled fast reactor plays a key role in its decay heat removal process, however the prediction for temperature distribution is quite complex due to the conjugate heat transfer between the assembly flow and the inter-wrapper flow. Hybrid medium model has been proposed for conjugate heat transfer modeling in the core. The core is modeled with a Realistic modeled inter-wrapper flow and hybrid medium modeled assembly flow. To validate present model, simulations for a three-assembly model were performed with Realistic modeling, traditional porous medium model and hybrid medium model, respectively. The influences of Uniform/Non-Uniform power distribution among assemblies and the Peclet number within the assembly flow have been considered. Compared to traditional porous medium model, present model shows a better agreement with in Realistic modeling prediction of the temperature distribution and the radial heat transfer between the inter-wrapper flow and the assembly flow.

Cooperative localization in 5G networks: A survey

Ping Zhang,Jian Lu,Yan Wang,Qiao Wang 한국통신학회 2017 ICT Express Vol.3 No.1

In upcoming 5G networks, key prospects such as increased bandwidth, smaller cells, higher mobile terminal (MT) densities, multiple radio access technologies, and the capability of device-to-device communication are beneficial for localization. Meanwhile, technologies suggested in 5G, such as massive multiple-in multiple-out, would also benefit from the accurate locations of MTs. Therefore, an opportunity to develop and integrate mobile localization technology in 5G networks has presented itself at this early stage. This paper reviews recent literature relating to localization in 5G networks, and emphasizes the prospect for implementing cooperative localization, which exploits the location information from additional measurements between MTs. To evaluate the accuracy of cooperative localization, a performance evaluation approach is also suggested.

Possible Epithelial Ovarian Cancer Association with HPV18 or HPV33 Infection

Zhang, Pei-Pei,Zhou, Lei,Cao, Jia-Shi,Li, Yi-Ping,Zeng, Zhi,Sun, Ni,Shen, Li,Zhu, Hao-Yue,Ruan, Yang,Zha, Wen-Ting,Wang, Xin-Yu,Zhang, Ke-Qiang,Zhang, Ran Asian Pacific Journal of Cancer Prevention 2016 Asian Pacific journal of cancer prevention Vol.17 No.6

The present study was conducted to investigate the prevalence of HPV infection in epithelial ovarian cancer (EOC) in Hunan province. DNA samples were collected from paraffin embedded ovarian tissue from 322 patients with EOC, 99 with ovarian benign tumors and 199 normal persons. The polymerase chain reaction and direct sequencing were used to identify the HPV types in the samples. The relationship between the infection of human papillomavirus (HPV) and the epithelial ovarian carcinoma (EOC) was investigated combined with clinical data. The prevalence of HPV18 and HPV33 in EOC group and benign group was higher than in the normal group. HPV18 and HPV33 may play a role in the development of both EOC and ovarian benign tumor and may participate in the development of EOC with traditional risk factors, family history and abortion, possibly exerting synergistic effects.

Improvement of heat and drought photosynthetic tolerance in wheat by overaccumulation of glycinebetaine

Wang, Gui-Ping,Hui, Zhen,Li, Feng,Zhao, Mei-Rong,Zhang, Jin,Wang, Wei The Korean Society of Plant Biotechnology 2010 Plant biotechnology reports Vol.4 No.3

Within their natural habitat, crops are often subjected to drought and heat stress, which suppress crop growth and decrease crop production. Causing overaccumulation of glycinebetaine (GB) has been used to enhance the crop yield under stress. Here, we investigated the response of wheat (Triticum aestivum L.) photosynthesis to drought, heat stress and their combination with a transgenic wheat line (T6) overaccumulating GB and its wild-type (WT) Shi4185. Drought stress (DS) was imposed by controlling irrigation until the relative water content (RWC) of the flag leaves decreased to between 78 and 82%. Heat stress (HS) was applied by exposing wheat plants to $40^{\circ}C$ for 4 h. A combination of drought and heat stress was applied by subjecting the drought-stressed plants to a heat stress as above. The results indicated that all stresses decreased photosynthesis, but the combination of drought and heat stress exacerbated the negative effects on photosynthesis more than exposure to drought or heat stress alone. Drought stress decreased the transpiration rate (Tr), stomatal conductance (Gs) and intercellular $CO_2$ concentration (Ci), while heat stress increased all of these; the deprivation of water was greater under drought stress than heat stress, but heat stress decreased the antioxidant enzyme activity to a greater extent. Overaccumulated GB could alleviate the decrease of photosynthesis caused by all stresses tested. These suggest that GB induces an increase of osmotic adjustments for drought tolerance, while its improvement of the antioxidative defense system including antioxidative enzymes and antioxidants may be more important for heat tolerance.

Expression of Ang-2/Tie-2 and PI3K/AKT in Colorectal Cancer

Zhang, Ji-Hong,Wang, Li-Hua,Li, Xiang-Jun,Wang, Ai-Ping,Reng, Li-Qun,Xia, Feng-Guo,Yang, Zhi-Ping,Jiang, Jing,Wang, Xiao-Dan,Wen, Chun-Yang Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.20

Purpose: To study the expression of angiogenin-2 (Ang-2) and its receptor Tie-2 in colorectal cancer and discuss the possible mechanisms behind this process. Materials and Methods: Using the streptavidin-peroxidase (SP) immunohistochemical method, paraffin sections from 100 colorectal cancer samples and 10 samples from tumor-adjacent normal tissue (> 2 cm from the edge of the gross tumor) were tested for protein expression of Ang-2, Tie-2, PI3K, and AKT. Reverse transcription-polymerase chain reaction and Western blots were further used to measure expression of the 4 genes and proteins in 20 freshly-resected colorectal cancer samples and tumor-adjacent normal tissues. Results: In colorectal cancer tissues, the expression of the Ang-2, Tie-2, PI3K, and AKT genes and their proteins was significantly higher than in tumor-adjacent normal tissues. Protein expression in poorly-differentiated adenocarcinoma was higher than that in well and moderately differentiated adenocarcinoma. According to Duke's classification, the protein expression in Stages C and D was significantly higher than that in Stages A and B. In the group with lymphatic metastasis, the protein expression was higher than that without lymphatic metastasis. Conclusions: In colorectal cancer, the expression of the Ang-2, Tie-2, PI3K, and AKT genes and their proteins is markedly higher than those in tumor-adjacent normal tissues. No correlation was observed between protein expression and gender, location, or histologic type. Correlations did exist between protein expression and differentiation level, stage of Duke's classification, and lymphatic metastasis; in colorectal cancer tissues with lower differentiation levels, higher stages of Duke's classification, and lymphatic metastasis, the expression of all 4 proteins was higher. The study of their expression patterns and relationships with aggression and metastasis will provide a valuable experimental foundation for assessing prognosis and targeted therapy of colorectal cancer.

Structural instantaneous frequency extraction based on improved multi-synchrosqueezing generalized S-transform

Ping-Ping Yuan,Xue-Li Cheng,Hang-Hang Wang,Jian Zhang,Zhong-Xiang Shen,Wei-Xin Ren 국제구조공학회 2021 Smart Structures and Systems, An International Jou Vol.28 No.5

A new method is proposed to improve the accuracy of structural instantaneous frequency (IF) extraction. The proposed method combines a new form of improved generalized S-transform (IGST) and a multi-synchrosqueezing operation. The parameters selection of the window function in IGST is derived through the concentration measure (CM) principle. Then, the multi-synchrosqueezing algorithm is employed to improve energy aggregation of time-frequency analysis (TFA). To verify the effectiveness and accuracy of the proposed improved multi-synchrosqueezing generalized S-transform (IMSSGST), a frequency-modulated multi-component signal is investigated. For structural IF extraction, a two-story shear frame and a threestory steel frame structure are introduced. Furthermore, the IF identification of a seven-story RC shear wall structure is conducted to verified the practicability in actual engineering. Numerical simulation and experimental results show that the proposed method can effectively improve the energy aggregation of TFA and effectively improve the accuracy of IF identification.

The Development and Application of a External Coating for Buried Pipeline Rehabilitation

( Zhang Li Ping ),( Lin Zhu ),( Zhang Qi Bin ),( Qin Yan Long ),( Wang Xue Ying ) 한국부식방식학회 2003 Corrosion Science and Technology Vol.2 No.3

Rapid characterization of ginsenosides in the roots and rhizomes of Panax ginseng by UPLC-DAD-QTOF-MS/MS and simultaneous determination of 19 ginsenosides by HPLC-ESI-MS

Wang, Hong-Ping,Zhang, You-Bo,Yang, Xiu-Wei,Zhao, Da-Qing,Wang, Ying-Ping The Korean Society of Ginseng 2016 Journal of Ginseng Research Vol.40 No.4

Background: Ginsenosides are the characteristic and principal components which manifest a variety of the biological and pharmacological activities of the roots and rhizomes of Panax ginseng (GRR). This study was carried out to qualitatively and quantitatively determine the ginsenosides in the cultivated and forest GRR. Methods: A rapid and sensitive ultra-high-performance liquid chromatography coupled with diode-array detector and quadrupole/time of flight tandem mass spectrometry (UPLC-DAD-QTOF-MS/MS) was applied to the qualitative analysis of ginsenosides and a 4000 QTRAP triple quadrupole tandem mass spectrometer (HPLC-ESI-MS) was applied to quantitative analysis of 19 ginsenosides. Results: In the qualitative analysis, all ingredients were separated in 10 min. A total of 131 ginsenosides were detected in cultivated and forest GRR. The method for the quantitative determination was validated for linearity, precision, and limits of detection and quantification. 19 representative ginsenosides were quantitated. The total content of all 19 ginsenosides in the forest GRR were much higher than those in the cultivated GRR, and were increased with the growing ages. Conclusion: This newly developed analysis method could be applied to the quality assessment of GRR as well as the distinction between cultivated and forest GRR.

Molecular cloning and characterization of novel human JNK2 (MAPK9) transcript variants that show different stimulation activities on AP-1

( Ping Zhang Wang ),( Ying Xiong ),( Chuan Ma ),( Tai Ping Shi ),( Da Long Ma ) 생화학분자생물학회 (구 한국생화학분자생물학회) 2010 BMB Reports Vol.43 No.11

The c-Jun NH2-terminal kinase (JNK) signaling pathway participates in many physiological functions. In the current study we reported the cloning and characterization of five novel JNK2 transcript variants, which were designated as JNK2 α3, JNK2 α4, JNK2 β3, JNK2 γ1 and JNK2 γ2, respectively. Among them, JNK2 α4 and JNK2 γ2 are potential non-coding RNA because they contain pre-mature stop codons. Both JNK2α3 and JNK2β3 contain an intact kinase domain, and both encode a protein product of 46 kDa, the same as those of JNK2α1 and JNK2β1. JNK2γ1 contains a disrupted kinase domain and it showed a disable function. When over-expressed in mammalian cells, JNK2α3 showed higher activity on AP-1 than that of JNK2β3 and JNK2γ1. Furthermore, JNK2α3 and JNK2β3 showed different levels of substrate phosphorylation, although they both could promote the proliferation of 293T cells. Our results further demonstrate that JNK2 isoforms preferentially target different substrates and may regulate the expression of various target genes. [BMB reports 2010; 43(11): 738-743]

Yield Resistance and Ultimate Resistance of Steel Beam with Random Corrosion Damage

Zhang Jing-Zhou,He Ying-Hua,Zhang Wen-Jin,Zhang Ping,Wang Yuan-Zuo,LI Guo-qiang 한국강구조학회 2024 International Journal of Steel Structures Vol.24 No.3

This paper presents a numerical study on the yield resistance and ultimate resistance of steel beam with random corrosion damage. The corrosion is considered by introducing random cylindrical pits to the intact steel beam, in which the thickness of the beam, both at the section and along the length of the beam is reduced. Altogether 240 corroded beams are numerically studied, wherein the eff ects of corrosion ratio, corrosion diameter, corrosion depth and corrosion location on the yield resistance and ultimate resistance of steel beam are considered. It is found that for global corrosion scenario, when the corrosion ratio is 4.76%, 9.26%, 13.37%, 18.25%, 22.36%, and 25.76%, due to the random nature of corrosion, the reduction factors of ultimate resistance of steel beam range from 0.9–0.92, 0.81–0.86, 0.77–0.8, 0.71–0.76, 0.64–0.67, and 0.58–0.64, respectively. Moreover, when corrosion distributes only at the bottom fl ange or top fl ange of steel beam, the adverse eff ects of bottom fl ange corrosion and top fl ange corrosion on the resistance of steel beam are the same. The corrosion diameter and corrosion depth have limited eff ects on the resistance of steel beam. The relationship between the reduction factors for the yield resistance and ultimate resistance with the corrosion ratio of the beam is proposed. It is found that for the global corrosion case, the reduction factors of the yield resistance and ultimate resistance of the beam are linearly and negatively correlated with the corrosion ratio. For each 10% increase in the corrosion ratio, the reduction factor of yield resistance and ultimate resistance decrease by 18.9% and 15.1%, respectively. The resistances of the corroded beam with random corrosion pits and uniform corrosion are also compared. The results suggest that by using uniform corrosion model, the resistance of the corroded steel beam will be signifi cantly overestimated. When the corrosion ratio is about 14%, the overestimation on the ultimate resistance of steel beam by using uniform corrosion model is more than 10%.