Research on Whole‑Process Tensile Behavior of Headed Studs in Steel–Concrete Composite Structures

Liang?Dong Zhuang,Hong?Bing Chen,Yuan Ma,Ran Ding 한국콘크리트학회 2021 International Journal of Concrete Structures and M Vol.15 No.4

The headed studs have been widely applied in steel–concrete composite structures as shear connectors. However, the tensile performance of headed studs is also key to the structural performance in many cases such as the semi-rigid composite joints including steel beam–concrete wall joint and steel column–base joint. Therefore, this study presents experimental and analytical study on the whole-process tensile behavior of headed studs. Tests on a total of 33 pullout specimens are first conducted. The tensile capacity and load–deformation behavior of the anchorage concrete, which dominates the structural performance of headed studs, are thoroughly analyzed. In addition, test data in the literature are collected for quantitatively evaluating the influence of embedment depth, bearing area, boundary conditions, and concrete strength on the tensile behavior of the anchorage concrete. On the basis of the influence evaluation, an analytical model represented by a piecewise function is proposed to describe the whole-process load–deformation behavior of the anchorage concrete and validated through the comparison between the predicted curves and all collected experimental results. Then the proposed model is applied to simulate the rotational behavior of the typical semi-rigid joint anchored by headed studs, which takes the contribution of the anchorage concrete into consideration, and is verified by experimental results. The research findings indicate that tensile behavior of anchorage concrete is crucial to the structural performance of semi-rigid joints, even for headed studs with large embedment depth and bearing area.

MiR-454 Prompts Cell Proliferation of Human Colorectal Cancer Cells by Repressing CYLD Expression

Liang, Hong-Liang,Hu, Ai-Ping,Li, Sen-Lin,Xie, Jia-Ping,Ma, Qing-Zhu,Liu, Ji-Yong Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.6

Previous studies have shown that miR-454 plays an important role in a variety of biological processes in various human cancer cells. However, the underlying mechanisms of this microRNA in colorectal cancer (CRC) cells remain largely unknown. In the present study, we investigated the miR-454 role in CRC cell proliferation. We found that miR-454 expression is markedly upregulated in CRC tissues and CRC cells compared with the matched tumor adjacent tissues and the FHC normal colonic cell line. Ectopic expression of miR-454 promoted the proliferation and anchorage-independent growth of CRC cells, whereas inhibition of miR-454 reduced this effect. Bioinformatics analysis further revealed cylindromatosis (CYLD), a putative tumor suppressor as a potential target of miR-454. Data from luciferase reporter assays showed that miR-454 directly binds to the 3'-untranslated region (3'-UTR) of CYLD mRNA and repressed expression at both transcriptional and translational levels. In functional assays, CYLD-silenced in miR-454-in-transfected SW480 cells have positive effect to promote cell proliferation, suggesting that direct CYLD downregulation is required for miR-454-induced CRC cell proliferation. In sum, our data provide compelling evidence that miR-454 functions as an onco-miRNA, playing a crucial role in the promoting cell proliferation in CRC, and its oncogenic effect is mediated chiefly through direct suppression of CYLD expression.

Notes of the genus Chlorophila Semenow with descriptions of two new species from China (Coleoptera: Tenebrionidae: Lagriinae: Lagriini: Statiriina)

Liang Zhi-Hong,Zhou Yong,Chen Bin 한국응용곤충학회 2022 Journal of Asia-Pacific Entomology Vol.25 No.1

The genus Chlorophila Semenow, 1891 is reviewed with all known eight species worldwide in this present paper. Two new species, Chlorophila carinadorsum sp. n. and Chlorophila longicornia sp. n. are described. Four known species are described again from freshly collected specimens. The diagnostic characters of, and a key to all known eight species are provided. www.zoobank.org/urn:lsid:zoobank.org:pub:8DFE3353-9B83-4950-ACE9-918A42017C56.

Investigation of Microstructural Evolution and Electrical Properties for Ni-Sn Transient Liquid-Phase Sintering Bonding

Hong-Liang Feng,Ji-Hua Huang,Jian Yang,Shao-Kun Zhou,Rong Zhang,Yue Wang,Shu-Hai Chen 대한금속·재료학회 2017 ELECTRONIC MATERIALS LETTERS Vol.13 No.6

Ni/Ni-Sn/Ni sandwiched simulated package structures weresuccessfully bonded under low temperature and low pressure byNi-Sn transient liquid-phase sintering bonding. The results showthat, after isothermally holding for 240 min at 300 °C and 180 minat 340 °C, Sn was completely transformed into Ni3Sn4 intermetalliccompounds. When the Ni3Sn4 phases around Ni particles werepressed together, the porosity of the bonding layer increased, whichobviously differed from the normal sintering densification process. With further analysis of this phenomenon, it was found that largevolume shrinkage (14.94% at 340 °C) occurred when Ni reactedwith Sn to form Ni3Sn4, which caused void formation. Amechanistic model of the microstructural evolution in the bondinglayer was proposed. Meanwhile, the resistivity of the bonding layerwas measured and analyzed by using the four-probe method; themicrostructural evolution was well reflected by the resistivity ofthe bonding layer. The relationship between the resistivity andmicrostructure was also discussed in detail.

Continuous Cooling Transformation Behavior and Impact Toughness in Heat-Affected Zone of Nb-Containing Fire-Resistant Steel

Hong Hong Wang,Zhan Peng Qin,Xiang Liang Wan,Ran Wei,Kai Ming Wu,Devesh Misra 대한금속·재료학회 2017 METALS AND MATERIALS International Vol.23 No.5

Simulated heat-affected zone continuous cooling transformation diagram was developed for advanced fireresistantsteel. Over a wide range of cooling rates, corresponding to t8/5 from 6 s to 150 s, granular bainite was thedominant transformation constituent, while the morphology of less dominant martensite-austenite (M-A) constituentchanged from film-like to block-type constituent; but the hardness remained similar to the average value of 190-205 HV (0.2). The start and finish transformation temperature was high at 700 °C and 500 °C, and is different fromthe conventional high strength low alloy steels. It is believed that the high-content (0.09 wt%) of Nb may promotebainite transformation at relatively high temperatures. Martenistic matrix was not observed at high cooling rateand the film-like M-A constituent and blocky M-A constituent with thin film of retained austenite and lath martensitewere observed on slow cooling. Excellent impact toughness was obtained in the heat-affected zone with15-75 kJ/cm welding heat input.

Association of XRCC3 Thr241Met Polymorphisms and Gliomas Risk: Evidence from a Meta-analysis

Liang, Hong-Jie,Yan, Yu-Lan,Liu, Zhi-Ming,Chen, Xu,Peng, Qi-Liu,Wang, Jian,Mo, Cui-Ju,Sui, Jing-Zhe,Wu, Jun-Rong,Zhai, Li-Min,Yang, Shi,Li, Tai-Jie,Li, Ruo-Lin,Li, Shan,Qin, Xue Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.7

The relationship between the X-ray repair cross-complementing group 3 (XRCC3) Thr241Met polymorphism and gliomas remains inclusive or controversial. For better understanding of the effect of XRCC3 Thr241Met polymorphism on glioma risk, a meta-analysis was performed. All eligible studies were identified through a search of PubMed, Elsevier Science Direct, Excerpta Medica Database (Embase) and Chinese Biomedical Literature Database (CBM) before May 2013. The association between the XRCC3 Thr241Met polymorphism and gliomas risk was conducted by odds ratios (ORs) and 95% confidence intervals (95% CIs). A total of nine case-control studies including 3,533 cases and 4,696 controls were eventually collected. Overall, we found that XRCC3 Thr241Met polymorphism was significantly associated with the risk of gliomas (T vs. C: OR=1.10, 95%CI=1.01-1.20, P=0.034; TT vs. CC: OR=1.30, 95%CI=1.03-1.65, P=0.027; TT vs. TC/CC: OR=1.29, 95%CI=1.01-1.64, P=0.039). In the subgroup analysis based on ethnicity, the significant association was found in Asian under four models (T vs. C: OR=1.17, 95%CI=1.07-1.28, P=0.00; TT vs. CC: OR=1.79, 95%CI=1.36-2.36, P=0.00; TT vs. TC/CC: OR=1.75, 95%CI=1.32-2.32, P=0.00; TT/TC vs. CC: OR=1.11,95% CI=1.02-1.20). This meta-analysis suggested that the XRCC3 Thr241Met polymorphism is a risk factor for gliomas, especially for Asians. Considering the limited sample size and ethnicities included in the meta-analysis, further large scale and well-designed studies are needed to confirm our results.

Expression and regulation of Angiopoietins and their receptor Tie-2 in sika deer antler

Hong-Liang Zhang,Bin Guo,Zhan-Peng Yue,Lu Zhang,Zhan-Qing Yang,Shuang Geng,Kai Wang,Hai-Fan Yu 한국통합생물학회 2017 Animal cells and systems Vol.21 No.3

The cartilage vascularization and chondrocyte survival are essential for endochondral ossification which occurs in the process of antler growth. Angiopoietins (Ang) is a family of major angiogenic growth factors and involved in regulating the vascularization. However, the expression and regulation of Angs in the antler are still unknown. The aim of this study is to localize the expression of Ang-1, Ang-2 and their receptor Tie-2 in sika deer antler using in situ hybridization and focused on analyzing the regulation of testosterone, estrogen, all-trans-retinoic acid (ATRA) and 9cRA on their expression in antler chondrocytes. The results showed that Ang-1, Ang-2 and Tie-2 were highly expressed in antler chondrocytes. Administration of testosterone to antler chondrocytes led to a notable increase in the expression of Ang-1 and Tie-2, and a reduction in the expression of Ang-2. The similar result was also observed after estrogen treatment. In contrast, ATRA and 9cRA could inhibit the expression of Ang-1 in antler chondrocytes and heighten the expression of Ang-2. Simultaneously, ATRA could downregulate the expression of Tie-2 in antler chondrocytes at 12 and 24 h, while 9cRA upregulate the expression of Tie-2 at 3 and 6 h. Collectively, Ang-1, Ang-2 and Tie-2 are expressed in antler chondrocytes and their expression can be affected by testosterone, estrogen, ATRA and 9cRA.

Variable Parameter Sliding Controller Design for Vehicle Brake with Wheel Slip

Liang, Hong,Chong, Kil-To The Korean Society of Mechanical Engineers 2006 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.20 No.11

In this paper, a 4-wheel vehicle model including the effects of tire slip was considered, along with variable parameter sliding control, pushrod force as the end control parameter, and an antilock sliding control, in order to improve the performance of the vehicle longitudinal response. The variable sliding parameter is made to be proportional to the square root of the pressure derivative at the wheel, in order to compensate for large pressure changes in the brake cylinder. A typical tire force-relative slip curve for dry road conditions was used to generate an analytical tire force-relative slip function, and an antilock sliding control process based on the analytical tire force-relative slip function was used. A retrofitted brake system, with the pushrod force as the end control parameter, was employed, and an average decay function was used to suppress the simulation oscillations. Simulation results indicate that the velocity and spacing errors were slightly larger than the results that without considering wheel slip effect, the spacing errors of the lead and follower were insensitive to the adhesion coefficient up to the critical wheel slip value, and the limit for the antilock control on non-constant adhesion road condition was determined by the minimum of the equivalent adhesion coefficient.

Radiological gastrostomy: A comparative analysis of different image-guided methods

Hong-Tao Hu,Hang Yuan,Chen-Yang Guo,Quan-Jun Yao,Xiang Geng,Hong-Tao Cheng,Jun-Li Ma,Yan Zhao,Li Jiang,Yu-Qing Zhao,Hai-Liang Li 소화기인터벤션의학회 2021 Gastrointestinal Intervention Vol.10 No.2

Background: Radiographic guided percutaneous gastrostomy has become a safe and effective enteral nutrition method for patients who can not eat by mouth. Fluoroscopy, computed tomography (CT) and cone-beam CT have been routinely used clinically. The aim of this study was to compare the advantages and disadvantages of percutaneous gastrostomy using different radiographic guided methods. Methods: We retrospectively analyzed the clinical data of 538 patients undergoing percutaneous gastrostomy in our department. According to the image guidance method used in gastrostomy, the patients were divided into groups A by fluoroscopy guidance, group B by fluoroscopy combined with C-arm CT guidance, and group C with the whole process CT guidance. The gastrostomy success rate, complication rate, procedure time, and patient radiation dose were analyzed in the three groups. Results: Among 538 patients, 534 were successful and the success rates are 94.3%, 99.3%, and 100% in group A, B, and C, respectively (P > 0.05). There were 3 cases occurred postoperative bleeding as serious adverse events and transferred to surgical gastrostomy. The minor complications include local infection, hyperplasia of granulation tissue, tube obstruction or prolapse, and local pain of the ostomy. The minor complication rates were 10.5%, 10.4%, and 7.7% in group A, B, and C, respectively (P > 0.05). The average procedure time was 25.57 ± 5.99 minutes, 29.01 ± 6.63 minutes, and 45.47 ± 8.98 minutes, respectively (χ2 = 87.98, P < 0.001). The average radiation dosage was 27.30 ± 19.27 mGy, 145.07 ± 106.08 mGy, and 2,590.26 ± 1,088.22 mGy, respectively (χ2 = 204.44, P < 0.001). Conclusion: There were no significant differences in the success rates and complication rates of gastrostomy under the three guiding methods. For difficult cases, CT-guided gastrostomy may be a very useful supplemental method.

An Analysis of the Export Competitiveness of Chinese Household Appliances to Korea

Hong Yan, Liang,Je Hong, Lee 한국무역금융보험학회(구 한국무역보험학회) 2021 무역금융보험연구 Vol.22 No.1

본 논문은 중국 가전제품의 한국시장에서 수출경쟁력 평가하는 것을 목적으로 하였다. 이를 위해 사용된 분석 도구는 시장점유율지수(MSI), 무역특화지수(TSI), 수출편향지수(EBI)이다. 가전제품은 HS코드 4단위 기준, 19개 품목을 대상으로 하고 2010년에서 2019년 사이의 한국무 역협회 통계자료를 바탕으로 연구를 진행하였다. 먼저 시장점유율지수를 도출하여 중국 가전 제품의 한국시장점유율은 가정용세탁기(8450), 송신기기(8525), 안테나(8529) 세 개 품목을 제 외한 품목이 상승세로 보거나 비교적인 높은 점유율을 유지하고 있음을 밝힐 수 있다. 무역특 화지수를 도출하여 중국가전제품의 대 한국무역특화지수는 19개 품목에서 7개이 강한 수출특 화지수를 유지하고 있고 나머지 품목이 수입특화도를 약화되고 있음을 밝힌다. 한국시장에서 중국 가전제품의 시장집중도를 알아보기 위해 수출편향지수 분석방법을 사용한 결과, 비교우위를 나타나는 품목이 3개 이었으며, 비교우위를 가까운 품목이 7개 이었다. 19개 품목에서 진공청소기(8505), 마이크로폰(8518), 송신기기(8525)품목을 제외하고 시장집중도가 높아진 것을 확인할 수 있었다. 이의 분석을 종합해 보면, 2010년부터 2019년까지 10년 간 중 국 가전제품은 한국시장에서 그 수출경쟁력이 상승하였고 비교우위가 높은 것으로 분석되었 다. 지금도 한국의 소형냉장고, 소형 TV, 다리미, 공기조절기, 전기기기, 면도기, 가열기 등 제 품은 중국에서 제조된 제품이 한국에서 수입이 증대하고 있으나, 고가품과 대형 제품 들은 한 국에서 자체 생산할 뿐만 아니라 품질면에서 우수하기 때문에 한국 제조 가전제품은 국내소비 가 증대하고 있다. Purpose : This study was conducted to understand the competitive aspects of Chinese home appliances in the Korean domestic market in order to introduce a model for improving the competitiveness of Korean products that dominate the global market in home appliances. For the implementation of this study, during the period from 2010 to 2019, a study was conducted to analyze the competitiveness of home appliances, which are Chinese electronic products, in the Korean market. Research design, data, methodology : This study used the market share index (MSI), trade specialization index (TSI), and export bias index (EBI) for the Korean market for Chinese home appliances, and the statistics of China's 2020 data were not fully achieved at the time of the study. Therefore, the period of study was set from 2010 to 2019. Results : As a result of using the export bias index analysis method to find out the market concentration of Chinese home appliances in the Korean market, 3 items showed comparative advantage and 7 items showed comparative advantage. In 19 items, it was confirmed that the market concentration increased except for the vacuum cleaner (8505), microphone (8518), and transmitter (8525) items. Conclusions : As a result of the analysis, it was analyzed that during the 10 years from 2010 to 2019, the export competitiveness of Chinese home appliances increased in the Korean market and the comparative advantage was high. Even today, products such as small refrigerators, small TVs, irons, air conditioners, electric appliances, razors, and heaters in Korea are imported from China, but high-priced and large-sized products are not only produced by themselves in Korea, Domestic consumption of home appliances manufactured in Korea is increasing because of its excellence in Korea.