http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Anticipatory I/O Management for Clustered Flash Translation Layer in NAND Flash Memory
Kwanghee Park,Junsik Yang,장준혁,Deok-Hwan Kim 한국전자통신연구원 2008 ETRI Journal Vol.30 No.6
Recently, NAND flash memory has emerged as a next generation storage device because it has several advantages, such as low power consumption, shock resistance, and so on. However, it is necessary to use a flash translation layer (FTL) to intermediate between NAND flash memory and conventional file systems because of the unique hardware characteristics of flash memory. This paper proposes a new clustered FTL (CFTL) that uses clustered hash tables and a two-level software cache technique. The CFTL can anticipate consecutive addresses from the host because the clustered hash table uses the locality of reference in a large address space. It also adaptively switches logical addresses to physical addresses in the flash memory by using block mapping, page mapping, and a two-level software cache technique. Furthermore, anticipatory I/O management using continuity counters and a prefetch scheme enables fast address translation. Experimental results show that the proposed address translation mechanism for CFTL provides better performance in address translation and memory space usage than the well-known NAND FTL (NFTL) and adaptive FTL (AFTL).
분산 HLR 환경에서 포워딩 포인터를 이용한 적응적 위치 관리 전략
최광희(KwangHee Choi),길준민(Joo-Min Gil),양권우(Kwon Woo Yang),박찬열(Chan Yeol Park),황종선(Chong-Sun Hwang) 한국정보과학회 1999 한국정보과학회 학술발표논문집 Vol.26 No.1A
포워딩 포인터를 이용한 위치 관리 전략은 이동성에 비해 호도착율이 낮은 이동 단말에 대해 효과적으로 위치 관리를 할 수 있고, HLR들이 분산된 환경에서 효과적으로 적용될 수 있다. 본 논문에서는 포인터 체인의 길이를 제한하는 분산 HLR 기반 포워딩 포인터 전략을 제안하고, 이를 단일 HLR 기반 포워딩 포인터 전략과 비용 측면에서 비교한다. 그리고, 이동 단말의 CMR을 고려하여 적응적으로 두 전략을 사용할 수 있는 기법을 제시한다.
임광희(Kwanghee Im),김승기(Seungki Kim),김태훈(Taehun Kim),김한슬(Hanseul Kim),David K. Hsu,박제웅(Jewoong Park),양인영(Inyoung Yang) 한국자동차공학회 2008 한국자동차공학회 지부 학술대회 논문집 Vol.2008 No.11
It is very important to detect fiber orientation error in composite laminates because the layup of a CFRP composite laminates affects the properties of the laminate, including stiffness, strength and thermal behavior. An NDE technique for stacking orientation determination would be very beneficial because of layup orientation influence to the laminate stiffness. Usually, it is found that ultrasonic shear wave is pretty sensitive to fiber direction of CFRP composite laminates. An investigation of shear wave ultrasonic technique was carried out in order to detect stacking orientation error for quasi-isotropy composite laminates. Also, a jig is developed for generating a shear wave. A pyramid with an isosceles triangle with two 45° was made of aluminum to generate shear waves using two longitudinal transducers based on ultrasonic-polarized mechanism. Also, the signal splitter was connected to the pulser jack on the pulser/receiver and to the longitudinal transducers. An investigation of shear wave ultrasonic technique was carried out in order to generating shear wave.
On Ultrasonic Techniques of Fiber Orientation in CFRP Composite Laminates
임광희(Kwanghee Im),김영남(Youngnam Kim),나승우(Seoungwoo Na),이길성(Kilsung Lee),David K. Hsu,박제웅(Jewoung Park),심재기(Jaeki Sim),양인영(Inyoung Yang) 한국자동차공학회 2004 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
The layup of a CFRP (carbon-fiber reinforced plastics) composite laminates affects the properties of the laminate, including stiffness, strength and thermal behavior. It is very important to detect ply error before the laminate is cured for both manual procedure and fiber placement procedure. An ultrasonic technique would be very beneficial, which could be used to test the part after and before curing laminates and requires less time than the optical test. Also cross-polarized scan is very sensitive to the layup errors and ply misorientations. Scanners were set out for different measurement modalities for acquiring ultrasonic signals as a function of in-plane azimuthal angle. Firstly, a manual scanner was built for making transmission measurements using a pair of normal-incidence shear wave transducers to find the effect of fiber misorientations of composite laminates. Also a method for nondestructively determining the ply layup in a composite laminate is presented. The method employs a normal-incidence longitudinal ultrasound to perform C-scan of ply interfaces of the laminate. And a ply-by-ply vector decomposition model has been developed, simplified, and implemented for composite laminates fabricated from unidirectional plies. Test results between after and before curing laminates with model data were compared for a fiber orientation of the laminates.
PCN에서 사용자 프로파일 복제를 이용한 동적 위치 관리 기법
최광희(KwangHee Choi),길준민(Joo-Min Gil),양권우(Kwon Woo Yang),황종선(Chong-Sun Hwang) 한국정보과학회 1999 한국정보과학회 학술발표논문집 Vol.26 No.2Ⅲ
본 논문에서 우리는 통신 비용과 데이터베이스 비용을 감소시키기 위해 사용자 프로파일 복제본을 이용한 동적 위치 관리 기법을 제안한다. 이 기법에서는 위치 등록과 호 설정 과정이 통신 비용을 감소시킬 수 있는 복제본이 있는 VLR에서 수행되고, 복제본이 있는 VLR에서 호의 빈도 커서 데이터베이스 비용을 감소시킨다. 제안한 기법의 성능을 분석하기 위해 분석 모델을 작성하고 제안 기법, IS-41 기법, 복제 기법의 성능 분석을 한다. 사용된 비교 척도는 통신 비용, 데이터베이스 비용, 총비용 그리고 호 설정 지연이다. 이 척도들에 대해서 제안 기법이 IS-41 기법, 복제 기법보다 더 좋은 성능을 보인다.
효율적 정보 필터링을 위한 지능형 협동 정보 필터링 에이전트
양재영(Jaeyoung Yang),홍광희(Kwanghee Hong),최중민(Joongmin Choi) 한국정보과학회 1999 한국정보과학회 학술발표논문집 Vol.26 No.2Ⅱ
정보의 양의 많아질수록 사용자가 자신이 원하는 정보를 찾는 작업은 많은 시간과 노력을 요구하게 된다. 이러한 시간과 노력을 줄이기 위해 정보 필터링 시스템이 제시되었고, 정보검색과 자연언어처리 등을 이용한 많은 방법들이 연구되었다. 그러나 이러한 접근방법들은 모두 사용자에게 새로운 정보요구가 생긴 경우 이를 지능적으로 대처하지 못하는 Cold-Start 문제를 안고 있다. 이를 극복하기 위해 협동 정보 필터링 시스템이 등장하였다. 이러한 협동 정보 필터링 시스템은 같은 관심도를 가지는 사람들로 공동체를 형성하기 위해 사용자로부터 관심도를 명시적으로 나타낼 것을 요구하는 등 사용자가 직접 필터링 시스템을 학습시켜야 하는 문제점을 가지고 있다. 본 논문에서는 이러한 문제를 해결하기 위해 사용자들의 선호도를 담고있는 사용자 프로파일의 유사성을 기반으로 한 공동체 형성 방법을 제안한다.
자동차 구조부재용 Al-CFRP 사각 혼성부재의 굽힘 특성
김정호(Jungho Kim),임광희(Kwanghee Im),편석범(Seokbeom Pyeon),양인영(Inyoung Yang),김지훈(Jihoon Kim) 한국자동차공학회 2007 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
The structural material which is used mainly in automobile or aircraft structure is going to change the aluminum alloy or composite material. On the study, it applied one of compound materials, CFRP. CFRP(Carbon fiber reinforced plastics) including light-weight, stiffness and hard condition widely used in various fields including space and aviation industries, sports and leisure industries and general structural members and parts. The material, however, has a serious drawback of brittle fracturing. It is difficult to use just CFRP material for structural members. So, it introduced the idea of hybrid composite material. It was manufacture by wrapping CFRP prepreg sheet outside aluminum square member that was using automobile structural members and having light-weight in autoclave. As the CFRP is an anisotropic material whose mechanical properties change with its stacking sequence or angle, special attention was given to the effects of the fiber orientation angle on the bending characteristics of Aluminum & CFRP hybrid square member. For comparing bending characteristics of Aluminum & CFRP hybrid square members with those of pure aluminum and CFRP member, tests were performed for hybrid member respectively.