http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Xiaoshuang Luo (검색결과 2 건)
- 무료
- 기관 내 무료
- 유료
-
Xiaoshuang Luo,Haitao Duan,Jian Li,Shengpeng Zhan,Dan Jia,Jiesong Tu,Yinhua Li,Yaping Chen 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.4
This study emphasizes the effect of ultrasonic surface rolling (USR) on the surface roughness, hardness, and tribologicalproperties of ductile iron under different normal loads. Results revealed that surface roughness was reduced by 96% andsurface hardness increased by 37.8% after USR treatment. By increasing normal load, the average friction coefficient of theUSR-treated specimens decreased, but the wear rate of both USR-treated and untreated specimens increased, mainly becausethe dominant wear mechanism changed. The average friction coefficient of the untreated specimen (~ 0.32) was much higherthan the USR-treated specimen (~ 0.24) when the normal load was 30 N. However, the wear rate of the USR-treated specimenwas larger than that of the untreated specimen when the normal load was greater than 20 N because the higher hardnessabrasive particles on the worn surface of the USR-treated specimen not only accelerated abrasive particle wear, but alsocaused more severe adhesive wear.
-
Effect of Contact Pressure on Reciprocating Wear Behavior of PEEK, PTFE, and UHMWPE
Liu Lian,Duan Haitao,Jia Dan,Tu Jiesong,Zhan Shengpeng,Li Yinhua,Luo Xiaoshuang,Zhan Wen,Xiong Wei,Li Jian 한국고분자학회 2020 폴리머 Vol.44 No.6
Engineering plastics are macromolecular compounds composed of covalently bonded macromolecules, which have been widely used in sliding wear-resistance materials in isolation bearings. In this study, an MFT-5000 reciprocating friction testing machine was used to compare the friction and wear performance of polyetheretherketone (PEEK), polytetrafluoroethylene (PTFE), and ultra-high molecular weight polyethylene (UHMWPE) under heavy load conditions in dry friction condition. The results show that load has a significant effect on the friction coefficient, wear rate, and wear mechanism of three materials. The instant friction coefficient of PTFE fluctuates under high load, the wear rate clearly increases with the increase in load. Therefore, the application under high load conditions is limited. The wear rate of UHMWPE is the least affected by the load among the three materials. Even when the load exceeds the yield strength, the wear resistance is still good. The friction coefficient of PEEK decreases with the increase in load but maintains a high value that restricts its application in sliding friction pair materials to some degree.
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
