A successive ‘‘conversion-deposition” mechanism achieved by micro-crystalline Cu2O modified current collector for composite lithium anode

Yifei Cai,Bin Qin,Chun Li,Xiaoqing Si,Jian Cao,Xiaohang Zheng,LIANG QIAO,Junlei Qi 한국공업화학회 2023 Journal of Industrial and Engineering Chemistry Vol.120 No.-

Lithium (Li) metal is a promising material for high-energy–density batteries, but it is still plagued byobvious capacity degradation and low average Coulombic efficiency resulting from dendrite Li propagation. One main reason is the electro-mechanic coupled failure of plated Li on the current collector, whichcontributes to non-dense Li deposition on the anode. Transition metal oxides (TMOs) with a conversiontypemechanism have been used directly as the anode materials for lithium ion batteries, which demonstratedbetter electro-mechanical stability than metal Li. Herein, a successive ’’conversion-deposition’’mechanism is ingeniously developed to restrain the generation of dendritic Li. Specifically, a microcrystallineCu2O modified current collector was prepared, in which Li+ are sequentially inserted intoCu2O and deposited in the form of Li metal at successive low potential. A Li-Cu half-cell based on thehybrid mechanism sustains a high Coulombic efficiency of over 99.3 % in up to 800 cycles. This work ingeniouslyinhibits the generation of dendrite Li by incorporating conversion-type materials withdeposition-dissolution type metal Li, which contributes to a novel concept for the design of functionalcurrent collectors for composite Li anodes.

Effect of the Molar Ratio of Li/Ti and Thermal Treatment on the Electrochemical Performance of Li4Ti5O12–rutile TiO2 Nanocomposite as Anode Materials

Zhen Yang,Xi-Ping Li,Jian Mao 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2016 NANO Vol.11 No.8

Li4Ti5O12–rutile TiO2 (LTO–RTO) dual-phase nanocomposite anode materials show excellent electrochemical performance. However, the effects of molar ratio of Li/Ti and thermal treatment on electrochemical properties of the LTO–RTO composite have been rarely reported. In this work, LTO–RTO nanocomposites were prepared by sol-hydrothermal method with different Li/ Ti molar ratios in raw materials and following calcinations at 600℃, 650℃ and 700℃ for the different holding time. The results indicate that with the decrease of Li/Ti molar ratio, the discharge capacity of the LTO–RTO nanocomposite increases at first and then decreases, and the optimal Li/Ti molar ratio is 4:4.77, which was obtained with calcination at 600℃ for 10 h. The effects of calcination temperature and holding time were further investigated. The result demonstrates that the thermal treatment has an obvious influence on the electrochemical performance due to the morphology change in the nanocomposite. The LTO–RTO nanocomposite calcinated at 650℃ for 2 h with a Li/Ti molar ratio of 4:4.77 in raw materials delivers excellent rate capability: the initial discharge capacity is 175.9, 176.3, 170.4, 167.5, 163.3 and 155.6 mA h g-1 at the rate of 0.5, 1, 3, 5, 10 and 20℃ (1 C = 175 mA h g-1), respectively.

DNA methylation and mRNA expression of COL6A3 in antler mesenchyme of female and male reindeer

Jian‑Cheng Zhai,Ruo‑Bing Han,Sheng‑Nan Wang,Qiang‑Hui Wang,Yan‑Ling Xia,Wei‑Shi Liu,Ya‑Jie Yin,He‑Ping Li 한국유전학회 2019 Genes & Genomics Vol.41 No.9

Backgroud Reindeer is the only deer species that both male and female produce antlers, which provides a particularly interesting case in studying the differences between antlers of the two sexes. Alpha 3(VI) Collagen Gene (COL6A3), forms a microfibrillar network associated with the structural integrity and biomechanical properties, has been found to be one of the differentially expressed genes in antler mesenchyme of female and male reindeer. Objective and Methods The promoter sequence of reindeer COL6A3 gene was obtained using the cloning technology and analyzed by the bioinformatics methods. Bisulfite sequencing PCR (BSP) was used to detect the methylation status of the COL6A3 promoter in reindeer antler mesenchyme. Real-time quantitative PCR was used to detect COL6A3 expression in the antler mesenchyme of female and male reindeer. Results Sequence analysis revealed that the reindeer COL6A3 partial promoter sequence was 983 bp including the possible promoter region at + 105 bp to + 155 bp. Homology and phylogenetic analysis indicated that the COL6A3 promoter of reindeer had the closest genetic distance with Bos taurus, Capra hircus and Ovis aries. BSP results indicated that the methylation level of COL6A3 promoter in the female reindeer antler mesenchyme was significantly higher than in the male. Correlating with increased methylation status, we also found that COL6A3 mRNA expression in female reindeer antler mesenchyme was significantly lower than in the male. Conclusion The higher methylation level of the COL6A3 gene in female reindeer antler mesenchyme coincides with decreased COL6A3 mRNA expression, thereby affecting the transposon silencing mechanism and possibly contributing to apparent differences of antlers in female and male reindeer.

長安三階敎寺院與終南山三階敎聖地

李健超 漢陽大學校 民族學硏究所 1994 民族과文化 Vol.2 No.-

Phthalocyanines as medicinal photosensitizers: Developments in the last five years

Li, Xingshu,Zheng, Bing-De,Peng, Xiao-Hui,Li, Song-Zi,Ying, Jia-Wen,Zhao, Yuanyuan,Huang, Jian-Dong,Yoon, Juyoung Elsevier 2019 Coordination Chemistry Reviews Vol.379 No.-

<P><B>Abstract</B></P> <P>Owing to their high extinction coefficients, long absorption wavelengths, and modification tunable photophysical and photochemical properties, phthalocyanines (Pcs) have been widely used as photosensitizers for photodynamic therapy (PDT). Advances made in the past five years on the development of Pcs as medicinal photosensitizers are reviewed and the main design considerations for medicinal applications of these substances are discussed.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Recent progresses made in the development of phthalocyanines for photodynamic therapy are outlined. </LI> <LI> Representative water-soluble phthalocyanines are presented. </LI> <LI> Main targeting strategies are discussed. </LI> <LI> Future challenges are also presented. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

Indium-tin-oxide, free, flexible, nonvolatile memory devices based on graphene quantum dots sandwiched between polymethylsilsesquioxane layers

Ooi, Poh Choon,Lin, Jian,Kim, Tae Whan,Li, Fushan Elsevier 2016 ORGANIC ELECTRONICS Vol.32 No.-

<P><B>Abstract</B></P> <P>Indium-tin-oxide (ITO) free, nonvolatile memory (NVM) devices based on graphene quantum dots (GQDs) sandwiched between polymethylsilsesquioxane (PMSSQ) layers were fabricated directly on polyethylene terephthalate (PET) substrates by using a solution process technique. Current-voltage (<I>I-V</I>) curves for the silver nanowire/PMSSQ/GQD/PMSSQ/poly(3,4-ethylenethiophene):poly(styrene sulfonate)/PET devices at 300 K showed a current bistability. The ON/OFF ratio of the current bistability for the NVM devices was as large as 1 × 10<SUP>4</SUP>, and the cycling endurance time of the ON/OFF switching for the NVM devices was above 1 × 10<SUP>4</SUP> s. The Schottky emission, Poole-Frenkel emission, trapped-charge limited-current, and space-charge-limited current were dominantly attributed to the conduction mechanisms for the fabricated NVM devices based on the obtained <I>I-V</I> characteristics, and energy band diagrams illustrating the “writing” and the “erasing” processes of the devices.</P> <P><B>Highlights</B></P> <P> <UL> <LI> ITO-free, two-terminal, MIM, NVM devices containing GQDs sandwiched between PMSSQ layers were fabricated by using a simple solution process. </LI> <LI> <I>I-V</I> curves for the Ag NW/PMSSQ/GQD/PMSSQ/PEDOT:PSS/PET devices at 300 K showed a current bistability. </LI> <LI> ON/OFF ratio of the current bistability for the NVM devices was as large as 1 × 10<SUP>4</SUP>. </LI> <LI> Cycling endurance time of the ON/OFF switching for the NVM devices was above 1 × 10<SUP>4</SUP> s. </LI> <LI> Schottky and PF emissions, TCLC, and SCLC were the dominant carrier transport mechanisms for the MIM, NVM device. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

Pyrophosphate-triggered nanoaggregates with aggregation-induced emission

Li, Chun-Tao,Xu, You-Liang,Yang, Jian-Gong,Chen, Yong,Kim, Hyeong Seok,Cao, Qian-Yong,Kim, Jong Seung Elsevier Sequoia 2017 Sensors and actuators. B Chemical Vol.251 No.-

<P><B>Abstract</B></P> <P>A novel tetraphenylethene-based probe bearing bis-imidazolium anion donors is herein reported for pyrophosphate anion recognition. This probe can self-assemble finite, small sphere nanoaggregates with very weak emission in aqueous solution, and changes into large rod-like nanoaggregates with strong aggregation-induced emission upon binding with the pyrophosphate anion.</P> <P><B>Highlights</B></P> <P> <UL> <LI> A bis-imidazolium functionalized tetraphenylethene probe was prepared. </LI> <LI> This probe self-assemble finite small sphere nanoaggregates in aqueous solution. </LI> <LI> The probe can recognize pyrophosphate anion with strong aggregation-induced emission. </LI> <LI> The probe/pyrophosphate assembly can fluorescence assay alkaline phosphatase. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>A novel nanoaggregates for recognition of pyrophosphate anion with aggregation-induced emission in pure aqueous solution is introduced.</P> <P>[DISPLAY OMISSION]</P>

Surface reconstruction from unorganized points with <i>l</i> ₀ gradient minimization

Li, Huibin,Li, Yibao,Yu, Ruixuan,Sun, Jian,Kim, Junseok Elsevier 2018 Computer vision and image understanding Vol.169 No.-

<P><B>Abstract</B></P> <P>To reconstruct surface from unorganized points in three-dimensional Euclidean space, we propose a novel efficient and fast method by using <I>l</I> <SUB>0</SUB> gradient minimization, which can directly measure the sparsity of a solution and produce sharper surfaces. Therefore, the proposed method is particularly effective for sharpening major edges and removing noise. Unlike the Poisson surface reconstruction approach and its extensions, our method does not depend on the accurate directions of normal vectors of the unorganized points. The resulting algorithm is developed using a half-quadratic splitting method and is based on decoupled iterations that are alternating over a smoothing step realized by a Poisson approach and an edge-preserving step through an optimization formulation. This iterative algorithm is easy to implement. Various tests are presented to demonstrate that our method is robust to point noise, normal noise and data holes, and thus produces good surface reconstruction results.</P> <P><B>Highlights</B></P> <P> <UL> <LI> With l0 gradient minimization, a fast and efficient surface reconstruction method is proposed. </LI> <LI> Our method is particularly effective for sharpening major edges and removing noises. </LI> <LI> Our method does not depend on the accuracy of normal vectors of the unorganized points. </LI> </UL> </P>

Research on the Influencing Factors and Transformation Path of Logistics Enterprise Low-Carbon Performance

Jian Li(Jian Li),Seung-Lin Hong(Seung-Lin Hong) The International Academy of Global Business and T 2023 The International Academy of Global Business and T Vol.19 No.1

Purpose - This study expounds that logistics enterprises should make use of an information-sharing mechanism, benefit distribution mechanism, and government guarantee mechanism to optimize and balance resource allocation with cooperative participants. Design/Methodology/Approach - This study developed a theoretical research model with interface management analysis, interface resource allocation, and interface management measures as independent variables; an interface connection mechanism and collaborative innovation capability as intermediary variables; and the low-carbon performance of enterprises as a dependent variable based on the structural equation model (SEM) and the empirical test, by selecting a certain number of logistics enterprises nationwide as research objects. Findings - This study discloses that elements such as interface management analysis, interface resource allocation, interface management measures, interface connection mechanism, and collaborative innovation capability contribute proportionally to the low-carbon performance of logistics enterprises. Meanwhile, the interface connection mechanism plays an intermediary role in the impact of interface management analysis and interface management measures on the low-carbon performance of enterprises. Research Implications - This study proposes that the collaborative innovation capability of enterprises should be improved through various interface management measures, and that R&D and the application of low-carbon technology and equipment must be accelerated, thus promoting the improvement of the low-carbon performance of enterprises, and enabling a low-carbon transformation in logistics enterprises, and even the whole logistics industry, so as to help achieve the carbon peak and move toward carbon neutrality as soon as possible.

Disruption of ecdysis in Leptinotarsa decemlineata by knockdown of chitin deacetylase 1

Jian-Jian Wu,Li-Li Mu,Zhong-Chao Chen,Kai-Yun Fu,Wen-Chao Guo,Chao Li,Guo-Qing Li 한국응용곤충학회 2019 Journal of Asia-Pacific Entomology Vol.22 No.2

Chitin deacetylases (CDAs) catalyze N-deacetylation of chitin, a crucial process for chitin modification. In the present paper, LdCDA1 was identified in Leptinotarsa decemlineata. It was copiously expressed in larval foregut, hindgut and epidermis. Just before the molt in the first, second and third larval instars, the mRNA levels of LdCDA1 were high. In the fourth (final)-instar larvae, a peak occurred 4 days after ecdysis. In vivo results revealed that LdCDA1 transcriptionally responded, positively and negatively respectively, to 20-hydroxyecdysone and juvenile hormone titers. Moreover, knockdown of LdCDA1 significantly reduced foliage consumption, lengthened developing period and prevented growth in the final instar larvae. Three distinct lethal phenotypes were noted in the LdCDA1 RNAi larvae. About 30% of the RNAi larvae became moribund and finally died; approximately 50% of deformed pupae died as pharate adults; and around 20% of LdCDA1 depleted pupae finally emerged as abnormal adults and eventually died within 1 week after emergence. Furthermore, chitin content was low and the mRNA levels of five chitin biosynthesis transcripts (LdUAP1, LdUAP2, LdChSAa, LdChSAb and LdChSB) were significantly declined in the LdCDA1 RNAi larvae. In addition, glucose, trehalose and glycogen contents were increased in the LdCDA1 depleted hypomorphs, along with highly expressed genes coding for trehalose and glycogen synthesis enzymes. The findings provide a compelling piece of evidence that CDA1 is critical for chitin deposition in L. decemlineata. Moreover, LdCDA1 may be a potential target for control of the larvae.