Polyaaccharide 類의 固形分斯體에 의한 藥物 傳達體系의 開發

서성훈,김길수,김동현,이승진,장미경 경희대학교 약학대학 1994 慶熙藥大論文集 Vol.22 No.

패션 일러스트레이션에 나타난 그로테스크 이미지

서승미 한국의류산업학회 2003 한국의류산업학회지 Vol.5 No.2

The first purpose of this research is to take a look at the concept and characteristics of Grotesque by understanding it's historical background. In terms of Grotesque image as visual art, the research will be implemented from a aesthetic of arts view point. Second, the Grotesque image will be visually analyzed upon the theory produced and Fashion Illustrated by Philip Thomson who first modernly defined and categorized the images into 'Discordance', 'Uncanny', 'Deformation' and 'Anti-play'. The Grotesque image of 'Discordance' found in Fashion Illustrations had heterogeneous points, which were put together without blending in creating contradictory transformation, producing visual tension. The 'Uncanny' image of Grotesque, shows the loss of human nature, neglect, fear and other features that reverberates society. At this point, signifiers expressed fright, uneasy feelings and mysterious situations by using automatism, being a fantastic mixture of shapes that manifests the Grotesque image of the unconscious world. The 'Deformation' images of Grotesque shown in Fashion Illustrations went so far as to magnifying and distorting certain parts of the human body, reorganizing the exaggerated images of body parts by using the technique of depaysement which transforms, omits and reduces shapes, creating an odd and ludicrous image. The Grotesque image of 'Anti-play' is an inspiration of conflict between comical features and mysterious or disgusting features. The images comically induce extreme terror, which disdains and mocks intimidations, creating a cruel sense of laughter.

들기자세 유형별 L₄-L?의 근전도 분석 : At the Base Knee Angle 무릎각도를 중심으로

서국웅,노석규,윤양진,정미라,이훈식,박승범 釜山大學校 附設 體育科學硏究所 1998 體育科學硏究所 論文集 Vol.14 No.-

This research is to find out the most suitable lifting posture and to provide fundamental data for preventing usual injuries. To do this, we select five male graduates and five female graduates of P university, analyze their muscular actions in terms of posture types, measure the limit value of weight lifting by comparing each lifting posture type(knee angle 40˚, 80˚, 180˚) with action amplitudes of two parts of erector spinae muscle, and draw our conclusion as follow ; 1. In case of every lifting posture(that is, knee angle 40˚, 80˚, 180˚), females have higher muscular conductivity value in L⁴-L? of right erector spinae muscle than males(p<.001), but in L⁴-L? of left erector spinae males has higher muscular conductivity value than females(p<.001). 2. Males show lower degree of change in muscular conductivity value from 10kg to 25kg weight lifting. 3. Females show gradually increasing degree of change in muscular conductivity value according as weight lifting is heavier. 4. Males show the constant muscular conductivity action of average 50∼110㎶ in the L⁴-L? in case of each lifting posture, knee angle 40˚, 80˚, and 180˚. 5. Females also show the constant muscular conductivity action of average 100∼200㎶ in the L⁴-L? in case of each lifting posture, knee angle 40˚, 80˚, and 180˚. But they show more active muscular conductivity in more than 15kg weight lifting, IOSHIC permission load value. In short, in case of males, weight lifting up to 25kg has little effect on erector spinae muscle but in case of females, weight lifting from more than 15kg has gradual effect on erector spinae muscle. Therefore, the muscular conductivity values of various posture types(by knee angle)are to be identified according to weight lifting steps.

에어로빅 댄스 Kick 동작의 운동역학적 분석

서국웅,이훈식,윤양진,정미라,박승범 釜山大學校 附設 體育科學硏究所 1998 體育科學硏究所 論文集 Vol.14 No.-

The purpose of this study is to investigate the front and side Maximum Vertical Ground Reaction Force's of Knee-up, long-kick and high-kick, the effect of them speed rate on Maximum Vertical Ground Reaction Force, and the damage factor caused by them, and to provide useful data for ordinary people or athlete aerobic programs. The result of this study is as follows ; 1. Maximum Vertical Ground Reaction Force is not significant between the front and the side. 2. Maximum Vertical Ground Reaction Force is significant between differences of speed rate. 3. Maximum Vertical Ground Reaction Force, speed and direction being equal, is significant according to the motion types: knee-up, long-kick and high-kick. 4. The possibility of causing damage is the highest when Maximum Vertical Ground Reaction Force is more than 20BW/sec. 5. High-kick, which needs quick and heavy motion, is considered not be fit for beginners. 6. Load-rate must be lowered by choosing adequate speed rate and motion type, and even in the career of skilled athletes, enough exercise and muscle strength training of legs are necessary in doing aerobic.

FINITE ELEMENT ANALYSIS OF MAXILLARY CENTRAL INCISORS RESTORED WITH VARIOUS POST-AND-CORE APPLICATIONS

서민석,손원준,이우철,유현미,조병훈,백승호 大韓齒科保存學會 2009 Restorative Dentistry & Endodontics Vol.34 No.4

근관 치료된 치아의 수복에 있어서 파절은 가장 중요하게 고려되는 점이다. 포스트를 사용해서 수복한다는 것은 치수와 다른 단단한 물질을 근관 내에 삽입한다는 것으로 자연스럽지 못한 구조를 만들어서 고유의 응력분산을 변화시킨다. 오랫동안 수많이 in vitro 연구들이 post-and-core로 수복된 치아의 파절 저항에 대해서 이루어졌지만 어떤 것이 최상의 선택인지에 대해서는 많은 상충되는 관점들이 존재한다. 본 연구의 목적은 유한요소분석법을 사용하여 post-and-core system의 물리적인 성질이 치질의 응력분산에 미치는 영향을 분석하고 어떤 조합이 파절 저항에 도움이 되는지를 알아보는 것이다. 근관 치료된 상악 중절치를 삼차원 유한 요소법으로 Modeling하였다. 1.5 mm의 ferrule 높이를 부여하고 외관은 zirconia ceramic crown으로 지정하였다. 세가지 평행한 형태의 포스트 (zirconia ceramic, glass fiber, and stain-less steel)와 두 가치 코어 (Paracore and Tetric ceram) 물질을 6개의 모델로 조합하였다. 각각의 모델은 해면골, 피질골, 치주인대 , 그리고 4 mm 근관 충전을 가지도록 설계하였다. 50 N의 정적인 교합력이 치아 장축에서 60도 각도로 치관의 설면에 적용시켰다. 모델들의 응력전달 특징의 차이를 분석하였고, 결과를 나타내는 데는 Maximum von Mises stress 값을 사용하였고 최대 변위량과 정수압도 계산하였다. Glass fiber post로 수복된 경우 높은 탄성계수를 가진 레진 코어 모델 (29.14 MPa)에서 낮은 탄성계수의 코어 모델(29.21 MPa)보다 더 낮은 응력이 발생하였다. Glass fiber post로 수복된 모델 (0.03497-0.03499 mm)은 다른 포스트로 수복된 모델들 (0.03245-0.03452 mm)보다 더 많은 최대 변위량을 보였다. 이는 glass fiber post로 수복된 치아의 경우가 상대적으로 치아에 가해지는 힘에 의해 더 많이 움직였다는 것을 보여준다. Zirconia ceramic 이나 stainless steel과 같이 탄성계수가 큰 포스트는 응력을 증가시키지만 포스트가 스트레스를 대부분 흡수하여 치질에는 스트레스가 낮게 나타났다. Glass fiber post로 수복된 모델에서는 코어와 크라운이 만나는 순면 치경부에서 가장 높은 응력이 발생하였다. The purpose of this study was to investigate the effect of rigidity of post core systems on stress disthbution by the theoretical technique, finite element stress-analysis method. Three-dimensional finite element models simulating an endodontically treated maxillary central incisor restored with a zirconia ceramic crown were prepared and 1.5 mm ferrule height was provided. Each model contained cortical bone, trabecular bone, periodontal ligament, 4 mm apical root canal filling, and post-and-core. Six combinations of three parallel type post (zirconia ceramic, glass fiber, and stainless steel) and two core (Paracore and Tetric ceram) materials were evaluated, respectively. A 50 N static occlusal load was applied to the palatal Surface of the crown with a 60° angle to the long axis of the tooth. The differences in stress transfer characteristics of the models were analyzed. von Mises stresses were chosen for presentation of results and maximum displacement and hydrostatic pressure were also calculated. An increase of the elastic modulus of the post material increased the stress, but shifted the maximum stress location from the dentin surface to the post material. Buccal side of cervical region (junction of core and crown) of the glass fiber post restored tooth was subjected to the highest stress concentration. Maximum von Mises stress in the remaining radicular tooth structure for low elastic modulus resin core (29.21 MPa) was slightly higher than that for high elastic modulus resin core (29.14 MPa) in case of glass fiber post. Maximum displacement of glass fiber post restored tooth was higher than that of zirconia ceramic or stainless steel post restored tooth.

형식주의 예술의상의 미적 가치

서승미,양숙희 服飾文化學會 2003 服飾文化硏究 Vol.11 No.1

The first purpose of this study is to take a better look at the background of Formalism art in the cultural society and to examine the aesthetic value of the formative arts of Formalism architecture that are all basically founded upon the study of Formalism. Secondly, it analyzes the aesthetic value of Formalism Art to Wear, Which can be explained as a mixture of art and fashion, by investigate to the features of art history. The results are as follows; First, Formalism Art to Wear of simultaneity does not represent continuance but simultaneous. In other words, inside the same time and place of dimension, events are visualized without transformation. Secondly, Formalism Art to wear of Geometrical Aesthetics deals with a purely genuine atmosphere that pursues absolute perfection, composed abstract of geometrical shapes. Thirdly, Formalism Art to Wear Deformation breaks away from balance and symmetry showing extreme transformation and new vitality. Fourthly, Formalism Art to Wear of Space Extension experiments with post-corporeality. post-corporeality centers the human body extension that is open to various boundaries of implosion and electronic technologies, providing us with a new Cyborg of the digital body.

Mo 화학기상증착에 있어서 불순물 농도에 미치는 증착조건의 영향

배상석,서성교,홍은식,김승모,조미정,한혜정,이두성,김세훈,민석홍 국립7개대학공동논문집간행위원회 2001 공업기술연구 Vol.1 No.-

The thermal decomposition process of Mo(CO)_6 on chemical vapor deposition was investigated by analyzing the effects of deposition temperature, pressure, and reaction gas on the phase change of deposited films. Mo_2C was deposited at or below 350℃ due to the incompleteness of thermal decomposition of Mo(CO)_6, but Mo films was successfully deposited at 400℃ or higher temperatures. The variation of deposition pressure did not change the dependence of decomposition process on deposition temperature. The activation energy of surface reaction was 5.8 ㎉/mole.

감과실 알코올 발효를 위한 효모의 분리

정용진,서권일,신승렬,서지형,강미정,김광수 동아시아식생활학회 1997 동아시아식생활학회지 Vol.7 No.4

To utilize abundant poor persimmon fruits effectively, it was studied on alcohol fermentation strains which were isolated and indentified from poor persimmon fruits. The strains which had exellent alcohol production ability were analysized morphogical, cultural characteristics and identified Saccharomyces cerevisiae YJK 20, Sacahroimyces kluveri DJ 97. Alcohol production ability between the isolated strains and industrial alcohol yeasts was compared in the YPD medium, persimmon extract medium. Isolated strains had high alcohol production ability in both of two medium, respectively. So it was expected that the strains, YKJ 20 and DJ 97 had good alcohol fermentation ability of persimmon fruits.

인조 합성 테니스 바닥재의 지면 반력 분석

조승제,정미라,서국웅,박승범,윤양진,이훈식,강영택 釜山大學校 附設 體育科學硏究所 1998 體育科學硏究所 論文集 Vol.14 No.-

Some authors suggest that certain types of surfaces are the origin of such injuries. A few years after the first medical concerns about surfaces were voiced, publications of biomechanical measurements apperared, describing accleration, force, and impact measurement on different types of surfaces. In many sport activities, surfaces can be under very high dynamic load. This was the reason for the development of various methods for impact simulation, like the development of various methods for impact simulation, like the artificial athlete. Furthermore, it is important to collect information about the hardness of new and already existing surfaces in sport arenas. The idea on which this measuring system is based Is as follows: The stiffness of the material can be computed from the kinematics measurd at touch down of a rigid body onto a material sample. The results show the following The result for the artifical surfaces(Synpave ace) is surprising. It is known that these surfaces are much harder than synpave rebound classic, synpave spring. This finding suggests that it may be possible that the subjective impression is used as one criterion in the selection of landing(or style) strategies. The number of subjects in this experiment is too small to make statistically significant conclusions. It is shown analytically that when an object a deformable surface, the acceleration it experiences is inversely propotional to its mass. In future, it need to stress that the interaction between shoe and surface is important, and this aspect has now become well accepted. Considering biomechanical aspect in player's injury, it request Korean Standards for synthetic playing surfaces in sport like ASTM(America Society for Testing & Materials) standards of America, DIN 18035 standards of Germany, BSI standards of U.K.

연마방법에 따른 탄성의치의 표면거칠기와 Candida albicans의 부착율 변화

오주원,서재민,안승근,박주미,강철균,송광엽 대한치과보철학회 2012 대한치과보철학회지 Vol.50 No.2

연구 목적: 본 연구는 탄성의치 제작 시 주로 사용되는 polyamide를 수종의 연마방법을 사용하여 처리 후 Candida albicans의 부착정도와 표면거칠기를 비교하고자 하였다. 연구 재료 및 방법: 25×15×2 mm 크기의 polyamide 시편을 4군으로 나누어 연마재를 사용하여 기공용 lathe 연마하는 방법(기공실내 연마방법)과 각기 다른 2종의 실리콘 포인트로 진료실내 연마하는 방법, 그리고 실리콘포인트 연마 후 pumice로 연마하는 방법으로 처리하였다. C. albicans의 부착성을 평가하기 위해 5×106 CFU/ml의 C. albicans 현탁액에 시편을 2시간 동안 침적하였고 5회 수세처리 후 한천배지에서 배양하였다. 그리고 주사전자 현미경(JSM-5900, JEOL LTd., Tokyo, Japan) 촬영을 시행하였다. Profilometer (Surf-pak; Kawasaki, Japan)를 이용하여 표면거칠기를 측정하였고 통계처리를 위하여 SPSS 18.0 프로그램을 사용하였다. 일원변량분석으로 비교 분석하였고 사후검증은 C. albicans의 부착성 검증을 위해 Scheffe test를 시행하였으며 표면조도검증을 위해 Tamhane’s T2 test를 시행하였다(α=.01). 결과: 최대 거칠기 값을 보인 군은 2단계의 연마용 버를 사용한 것으로 0.32 ㎛±0.10 값을 나타냈으며, 가장 낮은 거칠기 값을 보인 것은 tungsten carbide를 사용하지 않고 기공용 lathe로만 연마를 한 군으로 0.02 ㎛±0.00의 거칠기 값을 나타냈다. C. albicans 부착 실험에서는 기공용 lathe만을 이용한 연마방법이 가장 적은 부착수를 보였으며 다른 세 군과 유의한 차이가 발견되었다(P<.01). 결론: 표면거칠기 및 미생물 부착능 실험 결과 기공실 연마만을 시행한 경우 유의하게 낮은 거칠기 값과 부착율을 보였다. Pumice로 추가 연마한 군은 진료실연마를 시행한 군에 비해 낮은 거칠기 값을 보였으나 C. albicans 부착에 있어서는 유의한 차이를 보이지 않았다(P>.01). Purpose: The purpose of this study was to compare the effect of 3 chairside polishing methods and laboratory polishing methods on surface roughness and C. albicans adhesion of polyamide denture base. Materials and methods: Using contact profilometer, the surface of polyamide specimens (25×15×2 mm) was studied after conventional polishing without finishing and after chiarside polishing with 2 chiarside polishing kits and chairside-pumice polishing following finishing with tungsten carbide bur. To evaluate the adhesion of C. albicans, C. albicans suspension was overlayed on the test specimen. And the specimens were incubated for 2 hours. Imprint culture method was achieved and counted the colony on the agar plate. Polished polyamide were evaluated using a scanning electron microscope. The statistics were conducted using one-way ANOVA and in case of difference, Scheffe test and Tamhane’s T2 test were used. Results: Surface roughness (Ra) of surfaces polished with 2 chairside polishing kits had higher than conventional polishing and pumice polishing. The highest roughness value was 0.32 ± 0.10 ㎛, and the lowest was 0.02 ± 0.00 ㎛. The adhesion of C. albicans on the specimens polished with chairside polishing group and pumice polishing group were increased than conventional polishing group (P<.01). Conclusion: Conventional laboratory polishing was found to produce the smoothest surface and the lowest adhesion of C. albicans. Two groups polished with Chairside polishing kits were similar with respect to surface roughness. Surface of the specimen polished with pumice is significantly smoother than 2 chairside polishing groups, but the result of C. albicans adhesion is that group polished with pumice was similar with 2 chairside polishing groups (P>.01).