http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Sang‑Wook Kim,Hyeon‑Woo Son,Taek‑Kyun Jung,Young‑Bum Chun,Yi‑Hyun Park,Ji‑Woon Lee,Soong‑Keun Hyun 대한금속·재료학회 2019 METALS AND MATERIALS International Vol.25 No.4
The hot deformation behavior of advanced reduced-activation alloy (ARAA) was investigated using hot torsion tests. Thefl ow stress decreased as deformation temperature increased and as strain rate decreased. The fl ow behavior demonstratedthe typical dynamic recrystallization (DRX). Based on the constitutive analysis of peak stress, the activation energy for hotdeformation was found to be 330.3 kJ mol −1 . Peak stress was analyzed as a function of the Zener–Hollomon parameter, andcalculated and experimental values were in good agreement. A DRX kinetic model for ARAA was derived with deformationconditions based on the Avrami-type model. It was confi rmed that the volume fraction of dynamically recrystallized grainsincreased as deformation temperature increased and as strain rate decreased. The necklace structure and grain boundarybulging were observed in the deformed microstructure of ARAA. The suggested DRX mechanism for ARAA during hotworking is discontinuous DRX.
Original Article : Geographic difference of epidemiological features of HCV infection in Korea
( Kyung Ah Kim ),( Sook Hyang Jeong ),( Eun Sun Jang ),( Young Seok Kim3 ),( Youn Jae Lee ),( Eun Uk Jung ),( In Hee Kim ),( Sung Bum Cho ),( Mee Kyung Kee ),( Chun Kang ) 대한간학회 2014 Clinical and Molecular Hepatology(대한간학회지) Vol.20 No.4
Background/Aims: The prevalence of hepatitis C virus (HCV) infection in Korea exhibits significant geographic variation, with it being higher in Busan and Jeonam than in other areas. The reason for this intranational geographic difference was investigated in this study by conducting a comparative analysis of the risk factors related to HCV infection among three geographic areas: the capital (Seoul), Busan, and the province of Jeolla. Methods: In total, 990 patients with chronic HCV infection were prospectively enrolled at 5 university hospitals located in Seoul (n=374), Busan (n=264), and Jeolla (n=352). A standardized questionnaire survey on the risk factors for HCV infection was administered to these three groups of patients, and a comparative analysis of the findings was performed. Results: The analysis revealed significant regional differences in exposure to the risk factors of HCV infection. By comparison with patients in Seoul as a control group in the multivariate analysis, patients in Busan had significantly more experience of invasive medical procedures, acupuncture, cosmetic procedures, and multiple sex partners. In contrast, patients in Jeolla were significantly older, and they had a higher prevalence of hepatocellular carcinoma, a lower prevalence of multiple sex partners, and had experienced fewer invasive procedures. Conclusions: There was a significant geographic difference in the exposure to potential risk factors of HCV infection between patients from the three studied regions. This may explain the regional variation of the prevalence of HCV infection in Korea, and should be taken into account when planning strategies for the prevention and management of HCV infection. (Clin Mol Hepatol 2014;20:361-367)
Effect of Hydride Reorientation on Delayed Hydride Cracking In Zr-2.5Nb Tubes
Yun Yeo Bum,Kim Young Suk,Im Kyung Soo,Cheong Yong Moo,Kim Sung Soo Korean Nuclear Society 2003 Nuclear Engineering and Technology Vol.35 No.6
The objective of this study is to investigate the reorientation of hydrides with applied stress intensity factor, the peak temperature and the time when to apply the stress intensity factor in a Zr-2.5Nb pressure tube during its thermal cycle treatment. Cantilever beam (CB) specimens with a notch of 0.5 mm in depth made from the Zr-2.5Nb tube were subjected to electrolytic hydrogen charging to contain 60 ppm H and then to a thermal cycle involving heating to the peak temperature of either 310 or $380^{\circ}C$, holding there for 50 h and then cooling to the test temperature of $250^{\circ}C$. The stress intensity factor of either 6.13 or $18.4\;MPa\sqrt{m}$ was applied at the beginning of the thermal cycle, at the end of the hold at the peak temperatures and after cooling to the test temperature, respectively. The reorientation of hydrides in the Zr-2.5Nb tube was enhanced with the increased peak temperature and applied stress intensity factor. Furthermore, when the CB specimens were subjected to $18.4\;MPa\sqrt{m}$ from the beginning of the thermal cycle, the reoriented hydrides occurred almost all over the Zr-2.5Nb tube, surprisingly suppressing the growth of a DHC crack. In contrast, when the CB specimens were subjected to the stress intensity factor at the test temperature, little reorientation of hydrides was observed except the notch region, leading the Zr-2.5Nb to grow a large DHC crack. Based on the correlation between the reorientation of hydrides and the DHC crack growth, a governing factor for DHC is discussed along with the feasibility of the Kim's DHC model.
해외사례 벤치마킹에 기반한 국내 CM 대가체계 개선 시사점 도출
김상범,이정대,김재욱,Kim, Sang-Bum,Lee, Jeong-Dae,Kim, Jae-Wook 한국건설관리학회 2008 건설관리 : 한국건설관리학회 학회지 Vol.9 No.1
국내 CM은 2001년 건설산업기본법에 의해 개념과 범위가 정의된 후 지속적인 성장을 계속해 오고 있다. 하지만, 이러한 CM 제도에 기반한 성장에도 불구하고 국내에서의 CM 적용성과는 기대치에 비해 상대적으로 낮은 것으로 나타났다. 그 주요원인의 하나로 국내 CM제도가 책임감리에 비하여 업무범위가 넓지만, 대가기준은 책임감리에 비해 낮기 때문인 것으로 분석되었다. 따라서, 국내 CM 대가체계의 합리적인 기준을 정립하는 것이 시급할 것으로 판단된다. 본 연구에서는 CM 대가체계의 합리적인 기준을 마련하기 위하여 CMAA, ASCE, DOE, DOL 등의 다양한 해외사례 벤치마킹 연구를 통하여 국내 CM 대가체계를 비교하여 대가 상승요인을 추정하고 대가산정 개선방향을 제시하였다. 분석결과 대가수준은 해외에 비하여 현저하게 낮은 수준인 것으로 판단되었으며, 업무범위는 해외와 비교하여 그 폭이 좁으며 획일적인 구조를 가진 것으로 분석되었다. 따라서, 본 연구에서는 글로벌스탠다드에 따르는 국내 CM 대가체계를 개선하기 위하여 실비정액보수가산(Cost Plus Fixed Fee) 방식을 제시하고, 입 낙찰 전반에 걸친 CM 대가체계에 대한 기준(Framework)을 제시하였다. The Korean Construction Industry significantly contributed to the Korean economic development not only by preparing the domestic infrastructure but also by successfully conducting various international projects. However, major incidents such as the collapse of Sung-Su Bridge and Sam-Pung Department Store along with stagnation of Korean Economy have raised questions about underlying systematic problems of the Korean Construction Industry. As a solution to resurrect the Korean Construction Industry, the Construction Management (CM) system introduced in late 1990's and increasingly utilized as an innovative delivery system. Despite of the fast growth of CM, the performance of CM has not been up to the hype and low CM fee has been identified as one of the main reasons of unsatisfactory CM performance. Therefore, this research attempted to propose ways of improving 'CM Fee Guidelines' published by Korean Ministry of Construction and Transportation by conducting a benchmarking study on Global Standards of estimating CM Fee. International organizations benchmarked in this research include CMAA, ASCE, DOL, DOE, etc. Various investigation and analysis revealed that Korean 'CM Fee Guidelines' need to significantly modified comparing to Global Standards. This research also tried to prepare recommendations to improve the CM deliver system focusing on the 'Method of CM Fee Estimation' and Selection of a CM firm as an owner's agent.
The relationship between working condition factors and well-being
Bum-Joon Lee,Shin-Goo Park,Kyoung-Bok Min,Jin-Young Min,Sang-Hee Hwang,Jong-Han Leem,Hwan-Cheol Kim,Sung-Hwan Jeon,Yong-Seok Heo,So-Hyun Moon 대한직업환경의학회 2014 대한직업환경의학회지 Vol.26 No.-
Objectives: Working conditions can exert influence on the physical, mental, and even social health of workers. Well-being is an appropriate index for the evaluation of a person’s overall health. This paper investigated the association between various working conditions and worker’s well-being. Methods: Data from 10,019 interviews were collected from the second wave of the Korean Working Conditions Survey (2010) conducted by the Korea Occupational Safety and Health Agency between June and October 2010. The data from 5,995 employed workers were examined in this study. Well-being was measured through the WHO Five Well-Being Index (1998 version). Sociodemographic and working conditions were analyzed. Adjusted odds ratios for well-being were calculated with adjusted sociodemographic factors, working condition factors, or both. Results: Workers’ well-being was significantly higher when they were satisfied with their working conditions (OR = 1.656, 95% CI = 1.454?1.885), when their actual working hours were the same as their anticipated working hours (OR = 1.366, 95% CI: 1.120?1.666) or exceeding less than 10 hours (OR = 1.245, 95% CI: 1.004-1.543), and when their employment was stable (OR = 1.269, 95% CI: 1.098?1.467). Conclusions: This study supports the association between working condition factors and well-being in workers.
Kurthia ruminicola sp. nov., isolated from the rumen contents of a Holstein cow
Kim, Myung Kyum,Kim, Eun Tae,Kim, Sang Bum,Jeong, Ha Yeon,Park, Beom Young,Srinivasan, Sathiyaraj MICROBIOLOGICAL SOCIETY OF KOREA 2018 JOURNAL OF MICROBIOLOGY -SEOUL- Vol.56 No.1
Gram-staining-positive, motile, rod-shaped bacteria, designated as <TEX>$H31022^T$</TEX> and H31024 was isolated from rumen contents of a Holstein cow. Optimum growth occurred at <TEX>$25^{\circ}C$</TEX> and pH 7.0 on R2A agar medium. Oxidase and catalase activities are positive. The 16S rRNA gene sequence (1,452 bp) of the new isolates revealed they belong to the genus Kurthia of the phylum Firmicutes. Highest gene sequence similarities were assessed to be with Kurthia massiliensis <TEX>$JC30^T$</TEX> (98.4%), Kurthia senegalensis <TEX>$JC8E^T$</TEX> (97.5%), and Kurthia populi <TEX>$10y-14^T$</TEX> (97.4%). Kurthia sibirica DSM <TEX>$4747^T$</TEX> (97.3%), Kurthia zopfii NBRC <TEX>$101529^T$</TEX> (97.0%), and Kurthia gibsonii NCIMB <TEX>$9758^T$</TEX> (96.7%). DNA G + C content of strains <TEX>$H31022^T$</TEX> and H31024 were 34.4% and 39.7%. Strains <TEX>$H31022^T$</TEX> and H31024 has the following chemotaxonomic characteristics; the major fatty acids are <TEX>$iso-C_{15:0}$</TEX>, <TEX>$iso-C_{14:0}$</TEX> and <TEX>$anteiso-C_{15}$</TEX>; polar lipid profile contained diphosphatidylglycerol (DPG), phosphatidylethanolamine (PE), unknown aminophospholipids (APL), unknown glycolipids (GL), unknown phospholipids (PL), and unknown polar lipids (L); the major quinone is MK-7. Based on polyphasic taxonomic analysis, strains <TEX>$H31022^T$</TEX> (<TEX>$=KCTC\;33923^T=JCM\;19640^T$</TEX>) and H31024 (<TEX>$=KCTC\;33924^T=JCM\;19641^T$</TEX>) identified a novel species in the genus Kurthia for which the name Kurthia ruminicola sp. nov. is proposed.