http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
직교이방성 무한평판 내부의 두 원공사이에 존재하는 균열의 해석
정성균,홍창선,Cheong, S.K.,Hong, C.S. 대한기계학회 1993 대한기계학회논문집 Vol.17 No.7
This paper investigates the problem of a crack approaching two circular holes in an orthotropic infinite plate. The stress intensity factors were obtained by using the modified mapping-collocation method. The present results show excellent agreement with existing solutions for a crack approaching two circular holes in an isotropic infinite plate. In the numerical examples, various types of cross-ply laminated composites were considered. To investigate the effect of orthotropy and geometry(d/R and a/(d-R)) on crack tip singularity, stress intensity factors were considered as functions of the normalized crack length. It is expected that the modified mapping-collocation method can be applied to the analysis of various kinds of cracks existing around the stress-concentration region of composite laminate.
레이저 쇼크 피닝에 의한 H13/Cu 경사기능재료의 잔류응력 평가
신기훈(K. H. Shin),정호연(H. R. Cheong),정성균(S. K. Cheong),최대철(D. C. Choi),왕환(H. Wang) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
경사기능재료(Functionally Graded Materials)는 소재의 물성이 점진적으로 변화하는 것이 특징으로, 각 소재의 장점을 극대화 하는 것이 가능하여 많은 공학 분야에 적용될 수 있다. 본 연구에서는 DMT (Laser-aided Direct Metal Tooling) 공정을 통해 열전도성 사출 금형의 형상적응형 냉각회로 등에 적용 가능한 H13/Cu FGM 시편을 제작하였다. 레이저 기반 금속 프린팅으로 소재를 적층할 경우, 발생되는 열에 의해 제작된 시편의 균열 등을 유발하는 인장 잔류응력의 형성이 필연적이다. 따라서 본 연구에서는 적층 시편의 표면에 형성되는 인장잔류응력을 해소할 수 있는 방안으로 LSP (Laser Shock Peening) 공정 연구를 수행하였다. H13, Cu 소재의 무게 분율 20 wt%에 의해 6 종의 H13/Cu FGM 시편을 먼저 적층 제작하고, LSP 공정 전후의 시편에서 XRD 회절 패턴 분석(2θ 각도 변화 분석)을 통해 잔류응력을 측정하였다. 실험결과 LSP 공정 후 소재의 표면에 생성되는 압축잔류응력은 소재의 미세조직을 변형시키며, DMT 공정으로 생성된 인장잔류응력을 효과적으로 상쇄 시키는 것으로 판단된다.
Two-Microphone Impedance Tube Method를 이용한 차음재의 음향투과손실 측정
이승(S. Lee),이동훈(D.H. Lee),정성균(S.K. Cheong),용호택(H.T. Yong) 대한기계학회 2002 대한기계학회 춘추학술대회 Vol.2002 No.5
A new two-microphone impedance tube method to practically measure the sound transmission loss of sound isolation materials having small flexural rigidity has been proposed and validated in the previous research[4]. In this study, the influences of the size and the physical property of several sound isolation materials on the measured sound transmission loss are discussed. From the experimental results, it is found that the two-microphone impedance tube method is no longer valid to measure the sound transmission loss of sound isolation materials having large flexural rigidity because the regions of resonance and mass law are moved into the ranges in high frequency. In addition, in order to accurately measure the sound transmission loss of sound isolation materials, their size should be decided based on the consideration of the effect of acoustic excitation on their vibration response.
이종 폴리머 소재의 레이저 투과 용접 시 용접부의 물성에 관한 연구
최대철(D. C. Choi),정성균(S. K. Cheong),한영구(Y. G. Han),홍민철(M. C. Hong),신기훈(K. H. Shin) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
레이저를 이용한 공정은 제어, 반복, 가공 정밀도에 있어 우수한 성능을 보이고, 친환경적인 공정이기 때문에 많은 분야에서 공정 연구로 많이 사용하고 있다. 특히 레이저의 종류에 따라 소재의 투과율이 바뀌는 광학적 물성을 이용하여 투과율이 높은 소재와 흡수율이 높은 소재를 레이저로 용착시키는 공정인 레이저 투과 용접 공정은 레이저의 장점을 가지고 있을 뿐만 아니라, 레이저와 소재의 투과율을 변수로 하기 때문에 레이저의 종류와 소재의 투과율의 조정만으로 다양한 결과를 낼 수 있어 연구 확장성이 뛰어난 공정으로 많은 연구자들이 주목하는 공정이다. 본 연구에서는 PMMA 와 PC/ABS 두 종류의 이종 고분자 화합물 소재를 이용하여 레이저 투과 용접 공정을 진행하였다. 레이저 파워와 레이저 스캔 속도를 공정 변수로 선택하여 실험을 진행하였고, 공정을 통해 공정 변수 별로 각각 전단 시험용 시편과 인장 시험용 시편을 제작하여 전단 시험과 인장 시험을 통해 용접부의 전단 및 인장 강도를 정량화하여 비교하여 보았다. 그리고 시편의 파단 모드(Mode)를 분석하고, 단면의 물성을 EDS 및 나노 인덴터를 통해 분석하여 레이저의 공정 변수가 용접부의 물성에 어떠한 영향을 끼치는지 확인해 보았다.