Genetic Variation of H-FABP Gene and Association with Intramuscular Fat Content in Laiwu Black and Four Western Pig Breeds

Zeng, Y.Q.,Wang, G.L.,Wang, C.F.,Wei, S.D.,Wu, Y.,Wang, L.Y.,Wang, H.,Yang, H.L. Asian Australasian Association of Animal Productio 2005 Animal Bioscience Vol.18 No.1

This study was performed to detect genetic variation of the heart fatty acid-binding protein (H-FABP) gene by PCRRFLPs approach and its association with intramuscular fat (IMF) content. Data from 223 individuals, including one Chinese native pig breed and four western pig breeds, were analyzed. The results showed that for the H-FABP gene, there was one polymorphic HinfI site in the 5'-upstream region, whereas there were one HaeIII and one HinfI (marked as $HinfI^*$) polymorphic site in the second intron, respectively. The three PCR-RFLPs were present in all breeds tested. The allele frequencies, however, revealed significant differences between them (p<0.05). Furthermore, the allele frequency distribution of HinfI in the Laiwu Black and that of $HinfI^*$ in the Hampshire breed were at disequilibrium, which might be the result of selective breeding. Results also indicated that for HinfI, HaeIII and $HinfI^*$ HFABP RFLP, significant (p<0.05) contrasts of 0.78%, -0.69% and 0.72% were detected in the least square means of IMF content between the homozygous genotype HH and hh, DD and dd, BB and bb classes, respectively. It implied that the HHddBB genotype had the highest IMF content in this experimental population and these H-FABP RFLPs could serve, to some extent, as genetic markers for use in improvement of IMF content.

China Spallation Neutron Source: Accelerator Design Iterations and R&D Status

J. Wei,C.-D. Deng,C.-H. Wang,C.-T. Shi,H. Sun,H.-F. Ouyang,H.-M. Qu,H.-Y. Dong,J. Li,J. Zhang,J.-S. Cao,J.-Y. Tang,L. Dong,L.-L. Wang,Q. Qin,Q.-B. Wang,S. Wang,S.-N. Fu,S.-X Fang,T. -G. Xu,W. Kang,Y.- 한국물리학회 2007 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.50 No.I

The China Spallation Neutron Source (CSNS) is a high-power, accelerator-based project currently under preparation. The accelerator complex consists of an H$^-$ ion source, an H$^-$ linac, a rapid-cycling proton synchrotron, and the transport lines. During the past year, the design of most accelerator systems went through major iterations, and initial research and developments was started on the prototyping of several key components.

Effects of L-tryptophan, Fructan, and Casein on Reducing Ammonia, Hydrogen Sulfide, and Skatole in Fermented Swine Manure

Q.K. Sheng,Z.J. Yang,H.B. Zhao,X.L. Wang,J.F. Guo 아세아·태평양축산학회 2015 Animal Bioscience Vol.28 No.8

The effects of daily dietary Bacillus subtilis (Bs), and adding L-tryptophan, fructan, or casein to fecal fermentation broths were investigated as means to reduce the production of noxious gas during manure fermentation caused by ammonia, hydrogen sulfide (H2S), and 3-methylindole (skatole). Eighty swine (50.0±0.5 kg) were equally apportioned to an experimental group given Bs in daily feed, or a control group without Bs. After 6 weeks, fresh manure was collected from both groups for fermentation studies using a 3×3 orthogonal array, in which tryptophan, casein, and fructan were added at various concentrations. After fermentation, the ammonia, H2S, L-tryptophan, skatole, and microflora were measured. In both groups, L-tryptophan was the principle additive increasing skatole production, with significant correlation (r = 0.9992). L-tryptophan had no effect on the production of ammonia, H2S, or skatole in animals fed Bs. In both groups, fructan was the principle additive that reduced H2S production (r = 0.9981). Fructan and Bs significantly interacted in H2S production (p = 0.014). Casein was the principle additive affecting the concentration of ammonia, only in the control group. Casein and Bs significantly interacted in ammonia production (p = 0.039). The predominant bacteria were Bacillus spp. CWBI B1434 (26%) in the control group, and Streptococcus alactolyticus AF201899 (36%) in the experimental group. In summary, daily dietary Bs reduced ammonia production during fecal fermentation. Lessening L-tryptophan and increasing fructan in the fermentation broth reduced skatole and H2S.

Covalent attachment of chiral alkaloids onto silicon surfaces

H. Wang,H.L. Zhang,Y. Guo,F.Y. Qiao,Q.Y. Sun 한국물리학회 2007 Current Applied Physics Vol.7 No.s1

In this work, we report the covalent attachment of a chiral molecule onto a hydrogen-terminated Si(SiH) surface by using an extre-mely mild approach. Cinchonine, a chiral alkaloid was self-assembled onto a SiH surface via a photochemistry method at room tem-perature. The self-assembled monolayers (SAMs) obtained were characterized by means of ellipsometry, XPS and wettability studies.The lm formation kinetics was monitored by ellipsometry and XPS, which indicated that a full monolayer was formed within 15 h.

The Thermal Stability and Elevated Temperature Mechanical Properties of Spray-Deposited $SiC_P$/Al-11.7Fe-1.3V-1.7Si Composite

Hao, L.,He, Y.Q.,Wang, Na,Chen, Z.H.,Chen, Z.G.,Yan, H.G.,Xu, Z.K. The Korean Society for Composite Materials 2009 Advanced composite materials Vol.18 No.4

The thermal stability and elevated temperature mechanical properties of $SiC_P$/Al-11.7Fe-1.3V-1.7Si (Al-11.7Fe-1.3V-1.7Si reinforced with SiC particulates) composites sheets prepared by spray deposition (SD) $\rightarrow$ hot pressing $\rightarrow$ rolling process were investigated. The experimental results showed that the composite possessed high ${\sigma}_b$ (elevated temperature tensile strength), for instance, ${\sigma}_b$ was 315.8 MPa, which was tested at $315^{\circ}C$, meanwhile the figure was 232.6 MPa tested at $400^{\circ}C$, and the elongations were 2.5% and 1.4%, respectively. Furthermore, the composite sheets exhibited excellent thermal stability: the hardness showed no significant decline after annealing at $550^{\circ}C$ for 200 h or at $600^{\circ}C$ for 10 h. The good elevated temperature mechanical properties and excellent thermal stability should mainly be attributed to the formation of spherical ${\alpha}-Al_{12}(Fe,\;V)_3Si$ dispersed phase particulates in the aluminum matrix. Furthermore, the addition of SiC particles into the alloy is another important factor, which the following properties are responsible for. The resultant Si of the reaction between Al matrix and SiC particles diffused into Al matrix can stabilize ${\alpha}-Al_{12}(Fe,\;V)_3Si$ dispersed phase; in addition, the interface (Si layer) improved the wettability of Al/$SiC_P$, hence, elevated the bonding between them. Furthermore, the fine $Al_4C_3$ phase also strengthened the matrix as a dispersion-strengthened phase. Meanwhile, load is transferred from Al matrix to SiC particles, which increased the cooling rate of the melt droplets and improved the solution strengthening and dispersion strengthening.

First-principles study of the crystal structures and physical properties of H₁₈-BN and Rh6-BN

Ren, X.Y.,Zhao, C.X.,Niu, C.Y.,Wang, J.Q.,Jia, Y.,Cho, J.H. North-Holland 2016 Physics letters. Section A. Vol.380 No.46

<P>As the analog of carbon allotropes, new three-dimensional (3D) boron nitride (BN) allotropes have attracted much attention of researchers due to their great importance in fundamental sciences and wide practical applications. Here, based on first-principles density-functional theory calculations, we predict two new stable BN allotropes: One is H-18-BN with the P (6) over bar m2 (D-3h(1)) symmetry containing eighteen atoms in the hexagonal unit cell and the other is Rh6-BN with the R (3) over barm (C-3v(5)) symmetry containing six atoms in the rhombohedral primitive unit cell. The dynamic stabilities of the two structures are examined through the phonon spectrum analysis as well as molecular dynamics simulations, whereas the mechanical properties are analyzed by elastic constants, bulk modulus and shear modulus. From the analysis of the enthalpy evolution with respect to pressure, we find that h-BN can be transformed into either H-18-BN or RH6-BN structure under a higher pressure of similar to 15 GPa. We also find that both the H-18-BN and Rh6-BN allotropes are brittle materials with indirect band gaps of 2.31 and 4.48 eV, respectively. The simulated XRD spectra provide detailed structural information of H-18-BN and Rh6-BN for future experimental examinations. Our findings not only greatly enrich the existing structural family of 3D-BN materials but also stimulate further experiments. (C) 2016 Elsevier B.V. All rights reserved.</P>

Deoxynivalenol exposure induces autophagy/apoptosis and epigenetic modification changes during porcine oocyte maturation

Han, J.,Wang, Q.C.,Zhu, C.C.,Liu, J.,Zhang, Y.,Cui, X.S.,Kim, N.H.,Sun, S.C. Academic Press 2016 Toxicology and applied pharmacology Vol.300 No.-

Deoxynivalenol (DON) is a widespread trichothecene mycotoxin which contaminates agricultural staples and elicits a complex spectrum of toxic effects on humans and animals. It has been shown that DON impairs oocyte maturation, reproductive function and causes abnormal fetal development in mammals; however, the mechanisms remain unclear. In the present study, we investigate the possible reasons of the toxic effects of DON on porcine oocytes. Our results showed that DON significantly inhibited porcine oocyte maturation and disrupted meiotic spindle by reducing p-MAPK protein level, which caused retardation of cell cycle progression. In addition, up-regulated LC3 protein expression and aberrant Lamp2, LC3 and mTOR mRNA levels were observed with DON exposure, together with Annexin V-FITC staining assay analysis, these results indicated that DON treatment induced autophagy/apoptosis in porcine oocytes. We also showed that DON exposure increased DNA methylation level in porcine oocytes through altering DNMT3A mRNA levels. Histone methylation levels were also changed showing with increased H3K27me3 and H3K4me2 protein levels, and mRNA levels of their relative methyltransferase genes, indicating that epigenetic modifications were affected. Taken together, our results suggested that DON exposure reduced porcine oocytes maturation capability through affecting cytoskeletal dynamics, cell cycle, autophagy/apoptosis and epigenetic modifications.

Tests and finite element analysis on the local buckling of 420 MPa steel equal angle columns under axial compression

G. Shi,Z. Liu,H.Y. Ban,Y. Zhang,Y.J. Shi,Y.Q. Wang 국제구조공학회 2012 Steel and Composite Structures, An International J Vol.12 No.1

Local buckling can be ignored for hot-rolled ordinary strength steel equal angle compression members, because the width-to-thickness ratios of the leg don’t exceed the limit value. With the development of steel structures, Q420 high strength steel angles with the nominal yield strength of 420 MPa have begun to be widely used in China. Because of the high strength, the limit value of the width-to-thickness ratio becomes smaller than that of ordinary steel strength, which causes that the width-to-thickness ratios of some hot-rolled steel angle sections exceed the limit value. Consequently, local buckling must be considered for 420 MPa steel equal angles under axial compression. The existing research on the local buckling of high strength steel members under axial compression is briefly summarized, and it shows that there is lack of study on the local buckling of high strength steel equal angles under axial compression. Aiming at the local buckling of high strength steel angles, this paper conducts an axial compression experiment of 420MPa high strength steel equal angles, including 15 stub columns. The test results are compared with the corresponding design methods in ANSI/AISC 360-05 and Eurocode 3. Then a finite element model is developed to analyze the local buckling behavior of high strength steel equal angles under axial compression, and validated by the test results. Followingthe validation, a finite element parametric study is conducted to study the influences of a range of parameters, and the analysis results are compared with the design strengths by ANSI/AISC 360-05 and Eurocode 3.

Interdecadal change of the boreal summer circumglobal teleconnection (1958-2010)

Wang, H.,Wang, B.,Huang, F.,Ding, Q.,Lee, J.-Y. AGU AMERICAN GEOPHYSICAL UNION 2012 Geophysical research letters Vol.39 No.12

Tailoring of the plasmonic and waveguide effect in bulk-heterojunction photovoltaic devices with ordered, nanopatterned structures

Wang, D.H.,Kyaw, A.K.K.,Du, Q.G.,Choi, D.G.,Park, J.H. Elsevier Science 2014 Organic Electronics Vol.15 No.11

Various nano-patterned bulk-heterojunction (BHJ) films with different diameters and pitches were fabricated by a stamping method to tailor the plasmonic effect. The nanopatterned BHJ active layers exhibit regular-ordered embossing structures, which were confirmed by the surface morphological analysis with SEM and AFM. The simulation results confirm that devices with nanopatterned BHJ film with a diameter/pitch of 265/400nm exhibit a strong improvement in E-field distribution intensity due to the combination of the plasmonic and waveguide modes compared to devices without a nanopattern, with 150/400nm, or with 265/800nm, which led to increased J<SUB>SC</SUB> and cell efficiency in J-V curves under solar light illumination. The optimized plasmonic effect plays an important role in the light harvesting of BHJ devices.