http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Dias Pedro de Souza,Kato Augusto Shoji,Bueno Carlos Eduardo da Silveira,Vivan Rodrigo Ricci,Duarte Marco Antonio Hungaro,Calefi Pedro Henrique Souza,Pelegrine Rina Andréa 대한치과보존학회 2023 Restorative Dentistry & Endodontics Vol.48 No.1
Objectives This study aimed to compare the torsional and cyclic fatigue resistance of ProGlider (PG), WaveOne Gold Glider (WGG), and TruNatomy Glider (TNG). Materials and Methods A total of 15 instruments of each glide path system (n = 15) were used for each test. A custom-made device simulating an angle of 90° and a radius of 5 millimeters was used to assess cyclic fatigue resistance, with calculation of number of cycles to failure. Torsional fatigue resistance was assessed by maximum torque and angle of rotation. Fractured instruments were examined by scanning electron microscopy (SEM). Data were analyzed with Shapiro-Wilk and Kruskal-Wallis tests, and the significance level was set at 5%. Results The WGG group showed greater cyclic fatigue resistance than the PG and TNG groups (p < 0.05). In the torsional fatigue test, the TNG group showed a higher angle of rotation, followed by the PG and WGG groups (p < 0.05). The TNG group was superior to the PG group in torsional resistance (p < 0.05). SEM analysis revealed ductile morphology, typical of the 2 fracture modes: cyclic fatigue and torsional fatigue. Conclusions Reciprocating WGG instruments showed greater cyclic fatigue resistance, while TNG instruments were better in torsional fatigue resistance. The significance of these findings lies in the identification of the instruments’ clinical applicability to guide the choice of the most appropriate instrument and enable the clinician to provide a more predictable glide path preparation.
Andre Luiz Ferreira Costa,Rubens Caliento,Glauber Bareia Liberato da Rocha,Joao Pedro Perez Gomes,Alison Jhisel Calle Mansmith,Claudio Froes de Freitas,Paulo Henrique Braz-Silva 대한영상치의학회 2017 Imaging Science in Dentistry Vol.47 No.4
Foreign body granulomas can develop after the injection of various cosmetic filling materials into the facial area to flatten wrinkles. Clinically, reactive lesions are easily mistaken for soft-tissue neoplasms or cysts. This report presents a case of foreign body granuloma in a 52-year-old female patient complaining of a painless swelling in the nasolabial region. Both clinical and histological features are described, underscoring the diagnostic role of magnetic resonance imaging findings.
Costa, Andre Luiz Ferreira,Caliento, Rubens,da Rocha, Glauber Bareia Liberato,Gomes, Joao Pedro Perez,Mansmith, Alison Jhisel Calle,de Freitas, Claudio Froes,Braz-Silva, Paulo Henrique Korean Academy of Oral and Maxillofacial Radiology 2017 Imaging Science in Dentistry Vol.47 No.4
Foreign body granulomas can develop after the injection of various cosmetic filling materials into the facial area to flatten wrinkles. Clinically, reactive lesions are easily mistaken for soft-tissue neoplasms or cysts. This report presents a case of foreign body granuloma in a 52-year-old female patient complaining of a painless swelling in the nasolabial region. Both clinical and histological features are described, underscoring the diagnostic role of magnetic resonance imaging findings.
Data-mining modeling for the prediction of wear on forming-taps in the threading of steel components
Bustillo, Andres,Lopez de Lacalle, Luis N.,Fernandez-Valdivielso, Asier,Santos, Pedro Society for Computational Design and Engineering 2016 Journal of computational design and engineering Vol.3 No.4
An experimental approach is presented for the measurement of wear that is common in the threading of cold-forged steel. In this work, the first objective is to measure wear on various types of roll taps manufactured to tapping holes in microalloyed HR45 steel. Different geometries and levels of wear are tested and measured. Taking their geometry as the critical factor, the types of forming tap with the least wear and the best performance are identified. Abrasive wear was observed on the forming lobes. A higher number of lobes in the chamber zone and around the nominal diameter meant a more uniform load distribution and a more gradual forming process. A second objective is to identify the most accurate data-mining technique for the prediction of form-tap wear. Different data-mining techniques are tested to select the most accurate one: from standard versions such as Multilayer Perceptrons, Support Vector Machines and Regression Trees to the most recent ones such as Rotation Forest ensembles and Iterated Bagging ensembles. The best results were obtained with ensembles of Rotation Forest with unpruned Regression Trees as base regressors that reduced the RMS error of the best-tested baseline technique for the lower length output by 33%, and Additive Regression with unpruned M5P as base regressors that reduced the RMS errors of the linear fit for the upper and total lengths by 25% and 39%, respectively. However, the lower length was statistically more difficult to model in Additive Regression than in Rotation Forest. Rotation Forest with unpruned Regression Trees as base regressors therefore appeared to be the most suitable regressor for the modeling of this industrial problem.
World Gastroenterology Organisation Global Guidelines: Probiotics and Prebiotics October 2011
Guarner, Francisco,Khan, Aamir G.,Garisch, James,Eliakim, Rami,Gangl, Alfred,Thomson, Alan,Krabshuis, Justus,Lemair, Ton,Kaufmann, Pedro,de Paula, Juan Andres,Fedorak, Richard,Shanahan, Fergus,Sanders Lippincott WilliamsWilkins, Inc. 2012 JOURNAL OF CLINICAL GASTROENTEROLOGY Vol.46 No.6