http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한우 포유모우의 산유량및 유조성분에 관한 연구 1 . 포유모우의 산유량 추정방법 확립에 관한 연구
강수원(S . W . Kang),정연후(Y . H . Chung),정창화(C . H . Chung),나승환(S . H . Na),손용석(Y . S . Son),백동훈(D . H . Baik) 한국축산학회 1989 한국축산학회지 Vol.31 No.3
This experiment was conducted to establish the estimating of dam`s milk producing capacity which forms the basis of Korean Native Cattle improvement for 3 years from 1982 to 1984. Four methods, including weight difference of the calf before and after nursing, hand milking and machine milking were compared with a new milking while the calf nurses, which the good points from the existing methods were extracted and then were developed. Fifty nine heads of nursing cow were tested to investigate dam`s milk yield. dam`s milk composition by the new milking method for 3 years from 1985 to 1987. The results of this experiment are summarized as follows: 1. This new method was made to use a portable vacuum·operated bucket milker in two quarters of each cow`s left or right udder while the calf suckles two quarters of his or her dam`s right or left udder. On this method. cows and calves were seperated at 8:00 am and at 5:00 pm the calves allowed to nurse. Cows and calves remained seperated over night. At 8:00 am and 5:00 pm the following day, the calves allowed to nurse one udder half while the rest was milked by machine. 2. On the comparison with methods estimating dam`s milk yield, the method by calf-weight difference before and after nursing wasn`t exact and good method in estimating dam`s milk yield and composition because not only this method was indirectly estimated by calf`s weight gain but also milk sample could not be taken. And also, the method by hand milking and machine milking could be surveyed only 60 days and 4 to 10 days, respectively, because dam`s milk yield was rapidly decreased with passing the milking day. However, by the new method, milking could be completely done without failure for 180 days and samples for analyzing the milk composition could be taken more easily and exactly than any other method. 3. Daily average and total milk yield of fifty nine heads investigated by this new method for 180 days was 3.48 and 625.8kg, respectively. 4. In the milk composition, total solids, far, protein, lactose and ash content was 14.21, 4.64, 4.07, 4.21 and 0.89 percent, respectively.
공작기계용 개방형 HMI Platform 기반 사용자 라이브러리 운용, 관리 모듈 설계
손진호(J. Sohn),조정훈(J. H. Cho),이학철(H. C. Lee),정태근(T. K. Jung),이경태(K. T. Lee),박진욱(J. W. Park),나수인(S. I. Na) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
공작기계용 개방형 HMI Platform 은 하나의 단일 S/W Application 으로 구성되는 기존의 일반적인 HMI 시스템과 달리, 새로운 S/W Application 을 설치하거나, 기존 Application 이나 기능 혹은 모듈을 삭제할 수 있어 개별 생산 제조 현장에 최적화된 공작기계 사용 환경을 구성할 수 있다. 또한, 단위 기능이나 모듈을 라이브러리 형태로 만들고 이를 설치하여 다른 App 들이 공용으로 사용할 수 있는 기능을 제공할 수 있도록 지원한다. 이를 위해 공작기계용 개방형 HMI Platform 은 사용자 라이브러리를 설치 및 삭제할 수 있는 기능을 제공하며, 일관된 인터페이스와 데이터 교환 모델을 통해 손쉽게 주요 정보를 교환하고 이를 처리한 결과를 수용할 수 있도록 지원한다. 이 뿐만 아니라, 라이선스 관리 기능을 함께 제공하여 라이브러리에 대한 접근 권한 관리 기능도 지원한다. S/W Application 을 자유롭게 설치. 삭제할 수 있도록 함으로써 HMI 사용환경을 최적화할 수 있는 것과 마찬가지로 라이브러리를 설치 삭제함으로써 단위 App 의 기능을 확장하거나 최적화할 수 있게 지원하여 공작기계 HMI 환경을 좀 더 세밀하게 최적화 할 수 있는 수단을 제공한다 또한 각종 App 들이 공통으로 사용할 수 있는 필수 기능들을 라이브러리 형태로 제공함에 따라 공작기계용 S/W Application 개발을 활성화할 수 있으며, 라이선스 관리 기능 지원을 통해 라이브러리를 통한 과금 정책 운영의 수단을 제공함으로써 개방형 HMI 플랫폼 기반 소프트웨어 생태계 조성의 기반을 갖추게 된다.
이종원 ( J. W. Lee ),이현우 ( H. W. Lee ),나욱호 ( W. H. Na ),이시영 ( S. Y. Lee ) 한국농공학회 2013 한국농공학회 학술대회초록집 Vol.2013 No.-
원예특작시설은 구조물의 자중이 적은 경량뼈대구조로 구성되어 있어 기상재해에 취약한 실정이다. 원예시설 면적 중 자연재해에 취약한 비닐하우스가 전체 시설의 98.8%를 차지하고 있고, 인삼재배시설 또한 대부분 목재시설로 되어 있어 강풍이나 폭설에 매우 취약하여 기상재해로 인한 원예특작시설의 피해가 매년 반복적으로 발행하고 있다. 이러한 재해경감대책의 일환으로 2007년 4월에 ‘원예특작시설 내재해형 규격 설계도ㆍ시방서’을 1차 농림부 고시하여 원예특작시설 내재해형 모델을 보급하고 있으며, 현재는 농림수산식품부 고시 제2010-128호(2010.12.7.)로 4차 개정한 상태이다. 내재해형 규격시설은 지역별 내재해 설계하중 기준인 지역별 재현기간 30년에 해당하는 설계적설심과 설계풍속 이상으로 설계된 시설에 한하여 인정하고 있다. 단, 지역별 내재해 설계하중 기준의 최고값(적설심 40cm, 풍속 40m/s)을 상회하는 지역의 경우 관계전문기관(기술사)의 구조해석을 거쳐 지역별 내재해 설계하중기준에 맞게 시설을 설치한 것을 입증하는 경우에만 내재해형 규격으로 인정하고 있다. 현재, 농림수산식품부 고시 ‘원예특작시설 내재해형 규격 설계도ㆍ시방서’의 지역별 내재해형 규격 설계용 기준풍속은 5m/s 간격으로 나타내어져 있어 등급구간별 하중의 격차가 심하고, 설계풍속이 제시된 지역이 설계적설심을 제시한 지역과도 동일하지 않은 실정이다. 그리고, 기준에 표시되지 않은 시ㆍ군의 경우 인접 시ㆍ군의 풍속 평균값을 적용하도록 되어 있어 활용도가 떨어지고 있다. 따라서, 이러한 문제점을 개선함과 동시에 최근 기상자료가 반영된 지역별 내재해형 설계하중(적설심 및 풍속)을 산정하여 ‘원예특작시설 내재해형 설계하중기준’을 수정할 수 있는 정책자료를 제공하고자 본 연구를 수행하였다. 최근 기상자료를 포함하여 본 연구에서 분석한 원예특작시설 내재해형 설계하중과 기존 원예특작시설 내재해형 설계하중(2010. 12. 7고시)의 중앙값(예, 20~25범위 중앙값 22.5), 건축구조기준(KBC 2009), 강풍 및 대설 위험도 산정 기법개발(소방방재청, 2009) 및 이상기후에 대비한 시설기준(국토해양부, 2010)에 제시된 설계풍속을 비교하였다. 기존 원예특시설 내재해형 설계풍속이 본연구에서 도출된 내재해형 설계풍속보다 2.0m/s이상 과소평가된 지역은 경기도 고양시을 포함한 61개 지역이며, ±2.0m/미만인 지역은 강원도 동해시를 비롯한 61개지역, 2.0m/s이상 과대평가된 지역은 강원도 강릉시를 포함하여 41개 지역인 것으로 나타났다. 경기도 고양시, 강원도 고성군 및 정선군, 경북울릉군은 10m/s이상 과소평가된 지역으로 기존의 내재해형 설계풍속으로 설계할 경우에는 구조적인 안전에 문제가 있을 것으로 판단이 되며, 강원 삼척, 충북 보은, 경북 봉화, 전남 순천 및 광양지역은 9m/s이상 과대평가되어 본 연구에서 도출된 설계풍속으로 원예특작시설을 설치할 경우 상당한 금액의 시공비를 절감할 수 있을 것으로 판단된다.
Choi, S.B.,Lee, J.W.,Kim, N.S.,Na, S.H.,Keown, J.F.,Van Vleck, L.D. Asian Australasian Association of Animal Productio 2000 Animal Bioscience Vol.13 No.2
The objectives of this study of Hanwoo (Korean Cattle) were 1) to estimate genetic parameters for direct and maternal genetic effects for birth weight, weaning weight, and six months weight which can be used for genetic evaluations and 2) to compare models with and without grandmatemal effects. Data were obtained from the National Livestock Research Institute in Rural Development Administration (RDA) of Korea and were used to estimate genetic parameters for birth weight (BW, n=10,889), weaning weight at 120-d (WW, n=8,637), and six month weight (W6, n=8,478) in Hanwoo. Total number of animals in pedigrees was 14,949. A single-trait animal model was initially used to obtain starting values for multiple-trait animal models. Estimates of genetic parameters were obtained with MTDFREML using animal models and derivative-free REML (Boldman et al., 1995). Estimates of direct heritability for BW, WW, and W6 analyzed as single-traits were 0.09, 0.03, and 0.02 from Model 3 which included direct and maternal genetic, maternal permanental environmental effects, and effects due to sire ${\times}$ region ${\times}$ year-season interaction, respectively. Ignoring sire ${\times}$ region ${\times}$ year-season interaction effect in the model (Model 2) resulted in larger estimates for direct heritability than for Model 3. Estimates of maternal heritability for BW, WW and W6 were 0.04, 0.05, and 0.07 from Model 3, respectively. The estimates of direct-maternal genetic correlation were positive for BW, WW, and W6 with Model 3 but were negative with Model 2 for WW and W6. Estimates of direct genetic correlations between BW and WW, BW and W6, and WW and W6 were large: 0.52, 0.45, and 0.90, respectively. Genetic correlations were also large and positive for maternal effects for BW with maternal effects for WW and W6 (0.69 and 0.74), and even larger for WW with W6 (0.97). The log likelihood values were the same for models including grandmatemal effects as for models including maternal effects for all traits. These results indicate that grandmatemal effects are not important for these traits for Hanwoo or that the data structure was not adequate for estimating parameters for a grandmatemal model.
벡터제어 시스템에 의한 유도 전동기의 속응제어와 토오크 특성에 관한 연구
황락훈(L.H. Hwang),장은성(E.S. Jang),남우영(W.Y. Nam),조상로(I.K. Ahn),신양호(M.T. Cho),조문택(H.J. Joo),이춘상(C.S. Lee),나승권(S.K. Na) 전력전자학회 2003 전력전자학술대회 논문집 Vol.2003 No.7(2)
In this paper, the speed control system of induction motor was proposed using vector control algorithm and space voltage vector PWM method to improve the dynamic performance of induction motor.<br/> The control system is composed of the PI controller for speed control and the current controller using space voltage vector PWM technique The high-speed calculation and processing for vector control is carried out by TMS320C3I digital signal processor and IGBT module The proposed scheme is verified through digital simulations and experiments for 3.7[kw] induction motor and shows good dynamic performance.<br/>