http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
구강외과 수술용 스텐트 기반 영상유도 수술 시스템의 개발
이우진,김대승,이원진,이삼선,최순철,허민석,허경회,김명진,이지호 대한구강악안면방사선학회 2009 Imaging Science in Dentistry Vol.39 No.3
Purpose : The purpose of this study was to develop a stent-based image guided surgery system and to apply it to oral and maxillofacial surgeries for anatomically complex sites. Materials and Methods : We devised a patient-specific stent for patient-to-image registration and navigation. Threedimensional positions of the reference probe and the tool probe were tracked by an optical camera system and the relative position of the handpiece drill tip to the reference probe was monitored continuously on the monitor of a PC. Using 8 landmarks for measuring accuracy, the spatial discrepancy between CT image coordinate and physical coordinate was calculated for testing the normality. Results : The accuracy over 8 anatomical landmarks showed an overall mean of 0.56±0.16 mm. The developed system was applied to a surgery for a vertical alveolar bone augmentation in right mandibular posterior area and possible interior alveolar nerve injury case of an impacted third molar. The developed system provided continuous monitoring of invisible anatomical structures during operation and 3D information for operation sites. The clinical challenge showed sufficient accuracy and availability of anatomically complex operation sites. Conclusion : The developed system showed sufficient accuracy and availability in oral and maxillofacial surgeries for anatomically complex sites. (Korean J Oral Maxillofac Radiol 2009; 39 : 149-56)
단면 CT 영상을 이용한 무치악 하악 대구치부 잔존골의 형태 분석
이설미,허경회,이원진,허민석,이삼선,강태인,최순철 대한구강악안면방사선학회 2007 Imaging Science in Dentistry Vol.37 No.3
Purpose : The purpose of this study was to evaluate the morphologic features of posterior edentulous mandible for Korean patients using cross-sectional CT images. Materials and Methods : Computed tomographic cross-sectional views taken in 2004 and 2005 at Seoul National University Dental Hospital were analyzed by an oral and maxillofacial radiologist. Four indices were measured to meet the purpose of this study: 1) the horizontal distance between the alveolar crest and mandibular canal (Type), 2) the angle of the mandibular long axis (Angle), 3) the bucco-lingual location of mandibular canal, and 4) the depth of the submandibular fossa. The averages and standard deviations of the measurements were compared according to the location (the first and second molar area) and sex of the patients. Results : Statistically significant difference was found in Type, Angle, and submandibular fossa depth between the first and second molar area (P<0.05). However, there was no significant difference between men and women in any of the measured indices. Most of the mandibular canals were located in lingual side of posterior mandible. Conclusion : More care should be taken when an implant is installed on the mandibular second molar area.
돼지 하악골의 micro-CT 영상에서 추출한 3차원 골미세구조와 골강도 사이의 상관관계
허경회,박무순,이원진,허민석,이삼선,최순철 대한구강악안면방사선학회 2005 Imaging Science in Dentistry Vol.35 No.3
Purpose : To investigate the relationship between three-dimensional (3D) bone imaging parameters and trabecular strength in the mandible. Materials and Methods : Bone specimens were obtained from the mandibles of five male pigs weighing around 110 kg each. Of those, 43 samples were selected for 3D analysis and measured by micro-computed tomography. The five morphometric parameters were trabecular thickness (Tb.Th), bone specific surface (BS/BV), percent bone volume (BV/TV), structure model index (SMI) and degree of anisotropy (DA). Through destructive mechanical testing, strength parameters were obtained. Results : BV/TV, SMI, BS/BV, and Tb.Th showed significant correlations with strength parameters. DA did not show any correlation with the other parameters. In multiple linear regression analysis, BV/TV alone explained 43% of the variance in Young’s modulus. By stepwise inclusion of SMI, the variance in the Young’s modulus was better explained up to 52%. Conclusions : Predicting trabecular strength in the mandible through architectural analysis would be possible. Further study is needed to establish the tendency and variety of trabecular architecture and strength according to the locations within the mandible.
구민희,이찬원,문성원 경남대학교 환경문제연구소 2002 환경연구 Vol.25 No.-
A cleansing wastewater which comes from operating water-purifying machine is classified as a strong alkaline wastewater. When this alkaline wastewater was directly applied to the neutralization of acidic wastewater, there were several problems such as increasing the coagulant amount, reaction time, and floating of sludge in the neutralizing tank. Thus, the goal of this study is to fix the problems in utilizing the alkaline wastewater as a neutralizing agent by introducing a new method to the first pre-treatment process. A cleansing wastewater was characterized by pH 12.3, COD 28mg/L, and SS 25mg/L. Without any treatment, there would be some difficulties in treating in the following physicochemical sewage treatment facilities. When seawater or bittern was added to the alkaline wastewater, the solids were coprecipitated with Mg(OH)₂. Use of alkaline wastewater after removing some contaminants and color made it possible to treat wastewater effectively and economically in the next step of wastewater treatment.
돼지 하악 과두의 해면골에서 유한요소분석법으로 예측한 방향에 따른 탄성율과 3차원 골 미세지표 간의 상관관계
박관수,이삼선,허경회,이원진,허민석,최순철 대한구강악안면방사선학회 2008 Imaging Science in Dentistry Vol.38 No.2
Purpose : To investigate the relationship between 3D bone architectural parameters and direction-related elastic moduli of cancellous bone of mandibular condyle. Materials and Methods : Two micro-pigs (Micro-pig^(R), PWG Genetics Korea) were used. Each pig was about 12 months old and weighing around 44 kg. 31 cylindrical bone specimen were obtained from cancellous bone of condyles for 3D analysis and measured by micro-computed tomography. Six parameters were trabecular thickness (Tb.Th), bone specific surface (BS/BV), percent bone volume (BV/TV), structure model index (SMI), degree of anisotropy (DA) and 3-dimensional fractal dimension (3DFD). Elastic moduli of three orthogonal directions (superiorinferior (SI), medial-lateral (ML), andterior-posterior (AP) direction) were calculated through finite element analysis. Results : Elastic modulus of superior-inferior direction was higher than those of other directions. Elastic moduli of 3 orthogonal directions showed different correlation with 3D architectural parameters. Elastic moduli of SI and ML directions showed significant strong to moderate correlation with BV/TV, SMI and 3DFD. Conclusion : Elastic modulus of cancellous bone of pig mandibular condyle was highest in the SI direction and it was supposed that the change into plate-like structure of trabeculae was mainly affected by increase of trabeculae of SI and ML directions.
다발성 연조직 종괴를 동반한 급성 림프구성 백혈병의 증례 보고
장정용,허경회,이원진,허민석,이삼선,최순철 대한구강악안면방사선학회 2005 Imaging Science in Dentistry Vol.35 No.2
A 15-year-old patient, who had been diagnosed and treated as Burkitt cell type acute lymphoblastic leukemia (ALLL3) already, visited our department. He complained of gingival enlargement and loosening teeth 1 month ago. The clinical examination revealed anterior open bite, gingival enlargement, and nontender swelling particularly in molar regions of both jaws. Deep periodontal pockets and severe mobility was shown on most of the teeth. The panoramic radiographs showed severe bone destruction and extrusion of the molars. The contrast enhanced CT showed multiple enhanced mass and bone marrow obliteration in both jaws. Chemotherapy was done and the swelling was subsided at 1 month later. In conclusion, radiologic findings of leukemia with soft tissue mass, known as chloroma or granulocytic sarcoma, mimic those of lymphoma, so blood test may be needed for the final diagnosis.