Guided waves of porous FG nanoplates with four edges clamped

Zhao, Jing-Lei,She, Gui-Lin,Wu, Fei,Yuan, Shu-Jin,Bai, Ru-Qing,Pu, Hua-Yan,Wang, Shilong,Luo, Jun Techno-Press 2022 Advances in nano research Vol.13 No.5

Based on the nonlocal strain gradient (NSG) theory and considering the influence of moment of inertia, the governing equations of motion of porous functionally graded (FG) nanoplates with four edges clamped are established; The Galerkin method is applied to eliminate the spatial variables of the partial differential equation, and the partial differential governing equation is transformed into an ordinary differential equation with time variables. By satisfying the boundary conditions and solving the characteristic equation, the dispersion relations of the porous FG strain gradient nanoplates with four edges fixed are obtained. It is found that when the wave number is very small, the influences of nonlocal parameters and strain gradient parameters on the dispersion relation is very small. However, when the wave number is large, it has a great influence on the group velocity and phase velocity. The nonlocal parameter represents the effect of stiffness softening, and the strain gradient parameter represents the effect of stiffness strengthening. In addition, we also study the influence of power law index parameter and porosity on guided wave propagation.

CFD-DEM modeling of snowdrifts on stepped flat roofs

Zhao, Lei,Yu, Zhixiang,Zhu, Fu,Qi, Xin,Zhao, Shichun Techno-Press 2016 Wind and Structures, An International Journal (WAS Vol.23 No.6

Snowdrift formation on roofs should be considered in snowy and windy areas to ensure the safety of buildings. Presently, the prediction of snowdrifts on roofs relies heavily on field measurements, wind tunnel tests and numerical simulations. In this paper, a new snowdrift modeling method by using CFD (Computational Fluid Dynamics) coupled with DEM (Discrete Element Method) is presented, including material parameters and particle size, collision parameters, particle numbers and input modes, boundary conditions of CFD, simulation time and inlet velocity, and coupling calculation process. Not only is the two-way coupling between wind and snow particles which includes the transient changes in snow surface topography, but also the cohesion and collision between snow particles are taken into account. The numerical method is applied to simulate the snowdrift on a typical stepped flat roof. The feasibility of using coupled CFD with DEM to study snowdrift is verified by comparing the simulation results with field measurement results on the snow depth distribution of the lower roof.

Study on Key Image Information Positioning Method based on Template Matching and Gabor Filtering

Zhao Lei,Ren Hong-e 보안공학연구지원센터 2016 International Journal of Signal Processing, Image Vol.9 No.3

High Expression of Bcl-2 Protein Predicts Favorable Outcome in Non-small Cell Lung Cancer: Evidence from a Systematic Review and Meta-analysis

Zhao, Xian-Da,He, Yu-Yu,Gao, Jun,Zhao, Chen,Zhang, Ling-Lin,Tian, Jing-Yuan,Chen, Hong-Lei Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.20

Background: The prognostic value of Bcl-2 protein expression in non-small cell lung cancer (NSCLC) is under debate. We therefore systematically reviewed the evidence for Bcl-2 protein effects on NSCLC survival to elucidate this issue. Materials and Methods: An electronic search in Pubmed and Embase complemented by manual searches in article references were conducted to identify eligible studies to evaluate the association between Bcl-2 protein expression and overall survival (OS) as well as disease free survival (DFS) of NSCLC patients. Combined hazard ratios (HRs) with corresponding 95% confidence intervals (95%CIs) were pooled using the random-effects model. Results: A total of 50 trials (including 52 cohorts) encompassing 7,765 patients were pooled in the meta-analysis regarding Bcl-2 expression and OS of NSCLC patients. High expression of Bcl-2 protein had a favorable impact (HR=0.76, 95%CI=0.67-0.86). In the group of Bcl-2 expression and DFS, 11 studies including 2,634 patients were included. The synthesized result indicated high expression of Bcl-2 protein might predict good DFS (HR=0.85, 95%CI=0.75-0.95). Conclusions: Our present meta-analysis demonstrated favorable prognostic values of Bcl-2 expression in patients with NSCLC. Further prospective trails are welcomed to validate the utility of assessing Bcl-2 in NSCLC patient management.

C-Type Natriuretic Peptide/Natriuretic Peptide Receptor 2 Is Involved in Cell Proliferation and Testosterone Production in Mouse Leydig Cells

Lei Yang,Lanjie Lei,Qihan Zhao,Ying Gong,Gaopeng Guan,Shaoxin Huang 대한남성과학회 2019 The World Journal of Men's Health Vol.37 No.2

Purpose: This study investigated the role of natriuretic peptide receptor 2 (NPR2) on cell proliferation and testosterone secre-tion in mouse Leydig cells.Materials and Methods: Mouse testis of different postnatal stages was isolated to detect the expression C-type natriuretic peptide (CNP) and its receptor NPR2 by quantitative reverse transcription polymerase chain reaction (RT-qPCR). Leydig cells isolated from mouse testis were cultured and treated with shNPR2 lentiviruses or CNP. And then the cyclic guanosine mono-phosphate production, testosterone secretion, cell proliferation, cell cycle and cell apoptosis in mouse Leydig cells were ana-lyzed by ELISA, RT-qPCR, Cell Counting Kit-8, and flow cytometry. Moreover, the expression of NPR2, cell cycle, apoptosis proliferation and cell cycle related gene were detected by RT-qPCR and Western blot. Results: Knockdown of NPR2 by RNAi resulted in S phase cell cycle arrest, cell apoptosis, and decreased testosterone secre-tion in mouse Leydig cells.Conclusions: Our study provides more evidences to better understand the function of CNP/NPR2 pathway in male reproduc-tion, which may help us to treat male infertility.

Experimental and Numerical Investigation of Axial Tensile Strength of CHS X-Joints Reinforced with External Stiffening Rings

Lei Zhao,Lei Zhu,Hailin Sun,Lu Yang,Xi Chen 한국강구조학회 2020 International Journal of Steel Structures Vol.20 No.3

To study the reinforcement eff ect of the external stiff ening ring reinforced and unreinforced X-joints having a circular hollow section subjected to brace tensile load, an experimental and computer-simulated research has been done. Six full-scale X-joints are examined in this study: three reinforced specimens and three corresponding unreinforced ones. The test specimens cover diff erent brace to chord diameters ratios ( β ) of 0.25, 0.51, and 0.73. The experimental facilities and detailed parameters are presented. The experimental results including failure modes, load–displacement curves, and ultimate capacity are analyzed and compared. Two failure modes, weld failure and chord plastifi cation, are observed in the tests. The test results reveal an ultimate load enhancement in the reinforced joints by approximately 50% in comparison with the unreinforced joints and an initial stiff ness increase of 248.1% for the β of 0.25 and approximately 49–76% for the β of 0.51 and 0.73. A fi nite element model using shell elements is developed, which accurately predicts the static performance of the X-joints subjected to brace tensile load with and without external stiff ening rings.

Antibacterial, Antiadherence, Antiprotease, and Anti-Inflammatory Activities of Various Tea Extracts: Potential Benefits for Periodontal Diseases

Lei Zhao,Vu Dang La,Daniel Grenier 한국식품영양과학회 2013 Journal of medicinal food Vol.16 No.5

Porphyromonas gingivalis is a key etiologic agent of chronic periodontitis. This Gram-negative anaerobic bacterium produces several virulence factors and can induce a host inflammatory response that contributes to periodontal disease. In the present study, we investigated green tea, white tea, oolong tea, and black tea extracts with a high polyphenol content for their effects on (i) the growth and adherence of P. gingivalis, (ii) the activity of host and bacterial proteases, and (iii) cytokine secretion by oral epithelial cells. All the tea extracts inhibited the growth of P. gingivalis (minimal inhibitory concentrations ranging from 200 to 500 μg/mL; minimal bactericidal concentrations=500 μg/mL). In addition, they dose dependently reduced the adherence of P. gingivalis to oral epithelial cells. Tea extracts also inhibited the catalytic activity of matrix metalloproteinase (MMP)-9, neutrophil elastase, and P. gingivalis collagenase. Lastly, the tea extracts dose dependently inhibited the secretion of interleukin (IL)-6, IL-8, and chemokine (C-C motif) ligand 5 (CCL-5) by P. gingivalis–stimulated oral epithelial cells. No marked differences in the various effects were observed among the four tea extracts. Extracts from green tea, white tea, oolong tea, and black tea show promise for controlling periodontal disease by their capacity to interfere with P. gingivalis growth and virulence properties, host destructive enzymes, and inflammatory mediator secretion. Such extracts may be incorporated to oral hygiene products or locally delivered into diseased periodontal sites.

A design of transmission-type multi-target X-ray tube based on electric field modulation

Zhao, Lei,Jia, Wenbao,Jin, Limin,Shan, Qing,Cheng, Can,Zhu, Hongkui,Hei, Daqian Korean Nuclear Society 2021 Nuclear Engineering and Technology Vol.53 No.9

Multi-target X-ray tube is a new type X-ray source, and can be applied in many fields such as sensitive X-ray fluorescence analysis and medical imaging. In this work, we report an electric field modulation multi-target X-ray tube, which contains four targets (Cr, Ni, Au, Mo) coated on a Beryllium (Be) window. A four-valve electric field deflector was developed to deflect the electron beam to bombard the corresponding targets. Particle dynamics analysis software was employed to simulate the particle tracking of electron beam. The results show that the 30 keV electron beam could get a 6.7 mm displacement on the target plane by 10⁵ V/m electric field. The focus areas are about 2 mm × 5 mm and 4 mm × 2.5 mm after deflection in two directions. Thermal behavior calculated by ANSYS shows that the designed target assembly could withstand a 10 W continuous power. The optimum target thicknesses and emission spectra were obtained by Geant4 when the thickness of Be window was 300 mm and the electron beam incident angle was 0.141 rad. The results indicate that this multi-target X-ray tube could provide different X-ray sources effectively.

CFD-DEM modeling of snowdrifts on stepped flat roofs

Lei Zhao,Zhixiang Yu,Fu Zhu,Xin Qi,Shichun Zhao 한국풍공학회 2016 Wind and Structures, An International Journal (WAS Vol.23 No.6

Snowdrift formation on roofs should be considered in snowy and windy areas to ensure the safety of buildings. Presently, the prediction of snowdrifts on roofs relies heavily on field measurements, wind tunnel tests and numerical simulations. In this paper, a new snowdrift modeling method by using CFD (Computational Fluid Dynamics) coupled with DEM (Discrete Element Method) is presented, including material parameters and particle size, collision parameters, particle numbers and input modes, boundary conditions of CFD, simulation time and inlet velocity, and coupling calculation process. Not only is the two-way coupling between wind and snow particles which includes the transient changes in snow surface topography, but also the cohesion and collision between snow particles are taken into account. The numerical method is applied to simulate the snowdrift on a typical stepped flat roof. The feasibility of using coupled CFD with DEM to study snowdrift is verified by comparing the simulation results with field measurement results on the snow depth distribution of the lower roof.

The Relationship between Physical Environment and Customer Satisfaction

Lei Zhao,Kim Won-kyum,Kim Shi-sok,Kim Dong Il 한국콘텐츠학회 2009 ICCC International Digital Design Invitation Exhib Vol.2009 No.12

The physical environment and service quality have a positive impact on consumers' shopping satisfaction and future intentions to spread positive and negative word-of-mouth. The satisfied customers eventually become WOM influencers. The purpose of our research is to verify the mediating effects of the personal shopping values between the physical environment and customer satisfaction. Our research was implemented in several retail department stores. As a result, the meditating effects of personal shopping value were verified in playing a significant role in the relationships of physical environment with consumer satisfaction and WOM.