http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
(Pb,La)TiO_3/LiTaO_3/(Pb,La)TiO_3 다층 강유전 박막을 이용한 초전형 적외선 센서
성세경,이두현,최혁환,이명교,권태하 한국센서학회 2002 센서학회지 Vol.11 No.4
초전형 적외선 센서를 제작하기 위하여 rf 마그네트론 스퍼터링법으로 (Pb,La)TiO_3(PLT)/LiTaO_3(LTO)/PLT 강유전 박막을 증착한 후 급속 열처리하여 열처리 온도와 시간에 따른 결정성을 조사하였다. 강유전 박막의 C축 배향도에 따른 비유전율 및 유전손실을 측정하고 C축 배향도가 가장 큰 강유전 박막으로 제작된 센서에 대해 초전계수를 측정하여 센서의 전압응답에 대한 성능지수(F_V)와 감도에 대한 성능지수(F_D)를 구하였다. 얻어진 F_V, F_D는 각각 6.15×10 exp (-10) C · cm/J, 1.98×10 exp (-8) C · cm/J였다. For fabrication of the pyroelectric IR sensor (Pb,La)TiO_3(PLT)/LiTaO_3(LTO)/PLT ferroelectric thin films was deposited by rf magnetron sputtering followed by rapid thermal annealing and the crystallinity as a function of annealing temperature and time was investigated. Permittivity and dielectric loss factor of ferroelectric thin films as a function of c-axis preffered orientation was measured. Also pyroelectric coefficient of ferroelectric thin films with largest c-axis preffered orientation was measured and obtain figure of merit of voltage response(F_V) and detectivity(F_D). In this case F_V, F_D was 5.63×10 exp (-10) C · cm/J, 1.98×10 exp (-8) C · cm/J, respectively.
Soil Physical and Hydraulic Properties over Terrace Adjacent Four Major Rivers
Kyo Suk Lee,Jae Bong Lee,Myoung Yun Lee,Ri Na Joo,Dong Sung Lee,Doug Young Chung 한국토양비료학회 2016 한국토양비료학회지 Vol.49 No.3
The soil does not only serve as a medium for plant growth but also for engineering construction purposes. It is very weak in tension, very strong in compression and fails only by shearing. The behaviour of the soil under any form of loading and the interactions of the earth materials during and after any engineering construction work has a major influence on the success, economy and the safety of the work. Soils and their management have therefore become a broad social concern. A limitless variety of soil materials are encountered in both agronomy and engineering problems, varying from hard, dense, large pieces of rock through gravel, sand, silt and clay to organic deposits of soft compressible peat. All these materials may occur over a range of physical properties, such as water contents, texture, bulk density and strength of soils. Therefore, to deal properly with soils and soil materials in any case requires knowledge and understanding of these physical properties.The desired value of bulk density varies with the degree of stability required in construction. Bulk density is also used as an indicator of problems of root penetration,soil aeration and also water infiltration. This property is also used in foundation engineering problems. While not conforming to standard test procedures, this work attempts to add to the basic information on such important soil parameters as water content, bulk density.
Soil Physical and Hydraulic Properties over Terrace Adjacent Four Major Rivers
Lee, Kyo Suk,Lee, Jae Bong,Lee, Myoung Yun,Joo, Ri Na,Lee, Dong Sung,Chung, Doug Young 한국토양비료학회 2016 한국토양비료학회지 Vol.49 No.3
The soil does not only serve as a medium for plant growth but also for engineering construction purposes. It is very weak in tension, very strong in compression and fails only by shearing. The behaviour of the soil under any form of loading and the interactions of the earth materials during and after any engineering construction work has a major influence on the success, economy and the safety of the work. Soils and their management have therefore become a broad social concern. A limitless variety of soil materials are encountered in both agronomy and engineering problems, varying from hard, dense, large pieces of rock through gravel, sand, silt and clay to organic deposits of soft compressible peat. All these materials may occur over a range of physical properties, such as water contents, texture, bulk density and strength of soils. Therefore, to deal properly with soils and soil materials in any case requires knowledge and understanding of these physical properties. The desired value of bulk density varies with the degree of stability required in construction. Bulk density is also used as an indicator of problems of root penetration,soil aeration and also water infiltration. This property is also used in foundation engineering problems. While not conforming to standard test procedures, this work attempts to add to the basic information on such important soil parameters as water content, bulk density.