http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Wang Wei,Liang Xuanyu,Niu Qinghe,Wang Qizhi,Zhuo Jinyi,Su Xuebin,Zhou Genmao,Zhao Lixin,Yuan Wei,Chang Jiangfang,Zheng Yongxiang,Pan Jienan,Wang Zhenzhi,Ji Zhongmin 한국원자력학회 2023 Nuclear Engineering and Technology Vol.55 No.8
It is essential to evaluate the blasting-enhanced permeability (BEP) feasibility of a low-permeability sandstone-type uranium deposit. In this work, the mineral composition, reservoir physical properties and rock mechanical properties of samples from sandstone-type uranium deposits were first measured. Then, the reformability evaluation method was established by the analytic hierarchy process-entropy weight method (AHP-EWM) and the fuzzy mathematics method. Finally, evaluation results were verified by the split Hopkinson Pressure Bar (SHPB) experiment and permeability test. Results show that medium sandstone, argillaceous sandstone and siltstone exhibit excellent reformability, followed by coarse sandstone and fine sandstone, while the reformability of sandy mudstone is poor and is not able to accept BEP reservoir stimulation. The permeability improvement and the distribution of damage fractures before and after the SHPB experiment confirm the correctness of evaluation results. This research provides a reformability evaluation method for the BEP of the low-permeability sandstone-type uranium deposit, which contributes to the selection of the appropriate regional and stratigraphic horizon of the BEP and the enhanced ISL of the low-permeability sandstone-type uranium deposit.
Does Grass Bend with Wind Blowing over? - A Reflection of the Role of Moral Model
Wang Jinyi 한국윤리학회 2013 倫理硏究 Vol.89 No.1
Moral model has been thought to be capable of purifying social atmosphere and improving moral level of individual. Moral cultivation of individual, as this essay proposes, is influenced by social environment that includes broadly various elements. In contrast with political and economic constitutions, as the central parts of social environment, which influence morality of individual remarkably, the role of moral model is quite limited.
Wang, Feige,Wu, Xue-Bing,Fan, Xiaohui,Yang, Jinyi,Cai, Zheng,Yi, Weimin,Zuo, Wenwen,Wang, Ran,McGreer, Ian D.,Ho, Luis C.,Kim, Minjin,Yang, Qian,Bian, Fuyan,Jiang, Linhua IOP Publishing 2015 ASTROPHYSICAL JOURNAL LETTERS - Vol.807 No.1
<P>We report the discovery of an ultra-luminous quasar J030642.51+185315.8 (hereafter J0306+1853) at redshift 5.363, which hosts a supermassive black hole with M-BH = (1.07 +/- 0.27) x 10(10) M-circle dot. With an absolute magnitude M-1450 = -28.92 and a bolometric luminosity L-bol similar to 3.4 x 10(14) L-circle dot, J0306+1853 is one of the most luminous objects in the early universe. It is not likely to be a beamed source based on its small flux variability, low radio loudness, and normal broad emission lines. In addition, a z = 4.986 damped Ly alpha system (DLA) with [M/H] = -1.3 +/- 0.1, among the most metal-rich DLAs at z greater than or similar to 5, is detected in the absorption spectrum of this quasar. This ultra-luminous quasar puts strong constraints on the bright end of the quasar luminosity function and massive end of the black hole mass function. It will provide a unique laboratory for the study of BH growth and the co-evolution between a BH and the host galaxy with multi-wavelength follow-up observations. The future high-resolution spectra will give more insight into the DLA and other absorption systems along the line of sight of J0306+1853.</P>
Jinyi Wang,Sen Yang 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2018 NANO Vol.13 No.5
Nanoporous copper (NPC) and nanoporous copper-nickel (NPC-Ni) can be prepared by free corrosion dealloying Mn72 Cu28-x Nix (x = 0, 1, 3 at.% Ni) precursor alloys. Microscopic morphology characterization by scanning electron microscopy exhibited a three-dimensional bicontinuous porous structure with nanoscale ligaments and pores. NPC with a pore size of 48.7nm was obtained in 0.1M hydrochloric acid solution for 3.5 h dealloyed at 25 ℃. Under the same free corrosion dealloying condition, NPC-Ni1 and NPC-Ni3 were obtained with the pore size of 36.6nm and 28.1 nm, respectively. The results indicate that minor Ni atoms addition to the precursor greatly refined the dealloyed nanoporous structure. This effect could be attributed to the lower Ni surface diffusivity than that of Cu and resulted in slow down of the diffusion and rearrangement of Cu atoms during dealloying process. Post-dealloying heat treatment at 300 ℃, 450 ℃ and 600 ℃ made the ligaments coarsen in NPC and NPC-Ni.
Yi, Wei-Min,Wang, Feige,Wu, Xue-Bing,Yang, Jinyi,Bai, Jin-Ming,Fan, Xiaohui,Brandt, William N.,Ho, Luis C.,Zuo, Wenwen,Kim, Minjin,Wang, Ran,Yang, Qian,Zhang, Ju-jia,Wang, Fang,Wang, Jian-Guo,Ai, Yanl IOP Publishing 2014 ASTROPHYSICAL JOURNAL LETTERS - Vol.795 No.2
<P>Very few of the z > 5 quasars discovered to date have been radio-loud, with radio-to-optical flux ratios (radio-loudness parameters) higher than 10. Here we report the discovery of an optically luminous radio-loud quasar, SDSS J013127.34-032100.1 (J0131-0321 in short), at z = 5.18 +/- 0.01 using the Lijiang 2.4 m and Magellan telescopes. J0131-0321 has a spectral energy distribution consistent with that of radio-loud quasars. With an i-band magnitude of 18.47 and a radio flux density of 33 mJy, its radio-loudness parameter is similar to 100. The optical and near-infrared spectra taken by Magellan enable us to estimate its bolometric luminosity to be L-bol similar to 1.1 x 10(48) erg s(-1), approximately 4.5 times greater than that of the most distant quasar known to date. The black hole mass of J0131-0321 is estimated to be 2.7 x 10(9) M-circle dot, with an uncertainty up to 0.4 dex. Detailed physical properties of this high-redshift, radio-loud, potentially super-Eddington quasar can be probed in the future with more dedicated and intensive follow-up observations using multi-wavelength facilities.</P>
Bonding Strength of Conductive Inner-Electrode Layers in Piezoelectric Multilayer Ceramics
Wang, Yiping,Yang, Ying,Zheng, Bingjin,Chen, Jing,Yao, Jinyi,Sheng, Yun The Korean Institute of Electrical and Electronic 2017 Transactions on Electrical and Electronic Material Vol.18 No.4
Multilayer ceramics in which piezoelectric layers of $0.90Pb(Zr_{0.48}Ti_{0.52})O_3-0.05Pb(Mn_{1/3}Sb_{2/3})O_3-0.05Pb(Zn_{1/3}Nb_{2/3})O_3$ (0.90PZT-0.05PMS-0.05PZN) stack alternately with silver electrode layers were prepared by an advanced low-temperature co-fired ceramic (LTCC) method. The electrical properties and bonding strength of the multilayers were associated with the interface morphologies between the piezoelectric and silver-electrode layers. Usually, the inner silver electrodes are fabricated by sintering silver paste in multi-layer stacks. To improve the interface bonding strength, piezoelectric powders of 0.90PZT-0.05PMS-0.05PZN with an average particle size of $23{\mu}m$ were added to silver paste to form a gradient interface. SEM observation indicated clear interfaces in multilayer ceramics without powder addition. With the increase of piezoelectric powder addition in the silver paste, gradient interfaces were successfully obtained. The multilayer ceramics with gradient interfaces present greater bonding strength as well as excellent piezoelectric properties for 30~40 wt% of added powder. On the other hand, over addition greatly increased the resistance of the inner silver electrodes, leading to a piezoelectric behavior like that of bulk ceramics in multilayers.
Bonding Strength of Conductive Inner-Electrode Layers in Piezoelectric Multilayer Ceramics
Yiping Wang,Ying Yang,Bingjin Zheng,Jing Chen,Jinyi Yao,Yun Sheng 한국전기전자재료학회 2017 Transactions on Electrical and Electronic Material Vol.18 No.4
Multilayer ceramics in which piezoelectric layers of 0.90 Pb(Zr0.48Ti0.52)O3 -0.05 Pb(Mn1/3Sb2/3)O3 -0.05 Pb(Zn1/3Nb2/3)O3(0.90PZT-0.05PMS-0.05PZN) stack alternately with silver electrode layers were prepared by an advanced low-temperatureco-fired ceramic (LTCC) method. The electrical properties and bonding strength of the multilayers were associated with theinterface morphologies between the piezoelectric and silver-electrode layers. Usually, the inner silver electrodes are fabricatedby sintering silver paste in multi-layer stacks. To improve the interface bonding strength, piezoelectric powders of0.90PZT-0.05PMS-0.05PZN with an average particle size of 23 μm were added to silver paste to form a gradient interface. SEMobservation indicated clear interfaces in multilayer ceramics without powder addition. With the increase of piezoelectricpowder addition in the silver paste, gradient interfaces were successfully obtained. The multilayer ceramics with gradientinterfaces present greater bonding strength as well as excellent piezoelectric properties for 30~40 wt% of added powder. Onthe other hand, over addition greatly increased the resistance of the inner silver electrodes, leading to a piezoelectric behaviorlike that of bulk ceramics in multilayers.