http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Minimum torsional reinforcement ratio for reinforced concrete members with steel fibers
Ju, Hyunjin,Lee, Deuck Hang,Kim, Kang Su Elsevier 2019 COMPOSITE STRUCTURES -BARKING THEN OXFORD- Vol.207 No.-
<P><B>Abstract</B></P> <P>The current design codes for concrete structures suggest the minimum torsional reinforcement ratio to induce minimum ductile failure after cracking in reinforced concrete (RC) members subjected to torsional moment. However, as the member strengths are quite often lower than the torsional cracking moment strengths even when satisfying minimum torsional reinforcement ratio specified in the current codes, it may not serve the original purpose of preventing brittle failure immediately after cracking. In this study, a rational equation is thus presented for calculating the minimum torsional reinforcement ratio that could provide a sufficient margin of safety in design. The minimum fiber factor to be applied in steel fiber reinforced concrete (SFRC) members is also proposed. The proposed model was found to reflect the effects of torsional cracking strength, longitudinal and transverse reinforcement ratio, and the presence of torsional reinforcement in concrete members. It was also found that as the reserved strength included in the proposed equation is determined based on the test results of the RC members, it contains an appropriate factor of safety for the RC members. In addition, it was confirmed that the minimum fiber factor is conservative compared with the collected test results of the SFRC specimens.</P>
주현진 ( Ju Hyunjin ),서유재 ( Seo Yujae ),메이라모프디다르 ( Meiramov Didar ),조해창 ( Cho Hae-chang ),오재열 ( Oh Jae-yuel ) 한국구조물진단유지관리공학회 2022 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.26 No.2
현행 구조설계기준에 따른 콘크리트 구조물의 사용성 설계 및 유효 단면 2차 모멘트를 통한 처짐 산정방법은 안전점검 및 진단에 적용하는 데 한계가 있으며, 안전진단 시 균열폭과 처짐을 직접 측정하여 진단등급을 산정하게 된다. 이 연구에서는 균열폭 보다 상대적으로 관측이 쉬운 균열 길이 및 개수를 기반으로 휨 부재에서 발생하는 균열폭과 처짐을 산정하는 방법을 제시하고자 하였다. 균열이 발생하는 구간, 균열의 개수, 평균 균열 높이를 변수로 선형의 변형률 분포를 통해 균열폭을 산정할 수 있으며, 부재 길이 방향에 따라 분포하는 곡률의 평균값에 대해 모멘트면적법을 취하여 처짐을 구할 수 있다.
주현진 ( Ju Hyunjin ),서유재 ( Seo Yujae ),메이라모프디다르 ( Meiramov Didar ),조해창 ( Cho Hae-chang ),오재열 ( Oh Jae-yuel ) 한국구조물진단유지관리공학회 2022 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.26 No.2
현행 구조설계기준에 따른 콘크리트 구조물의 사용성 설계 및 유효 단면 2차 모멘트를 통한 처짐 산정방법은 안전점검 및 진단에 적용하는 데 한계가 있으며, 안전진단 시 균열폭과 처짐을 직접 측정하여 진단등급을 산정하게 된다. 이 연구에서는 균열폭 보다 상대적으로 관측이 쉬운 균열 길이 및 개수를 기반으로 휨 부재에서 발생하는 균열폭과 처짐을 산정하는 방법을 제시하고자 하였다. 균열이 발생하는 구간, 균열의 개수, 평균 균열 높이를 변수로 선형의 변형률 분포를 통해 균열폭을 산정할 수 있으며, 부재 길이 방향에 따라 분포하는 곡률의 평균값에 대해 모멘트면적법을 취하여 처짐을 구할 수 있다.