http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
알루미늄 튜브 하이드로포밍에서의 예비 굽힘 공정의 효과에 관한 연구
임희택,박경창,김형종,김헌영 江原大學校 産業技術硏究所 2004 産業技術硏究 Vol.24 No.B
Recently social demands of fuel economy and environmental regulations require the development of lightweight components and new manufacturing technologies. The aluminum tube hydroforming is a manufacturing process which can provide lightweight components as automotive parts. In this paper, the hydroformability of aluminium tube in different condition of bending process is presented. An investigation has been conducted on how to control the deformed shape and its effect on thinning distribution after hydroforming by using finite element simulation. Finite element simulation of tube hydroforming for automotive trailing arm is carried out to explore the effect of 2-dimensional and 3-dimensional bending.
Starter 및 멸치액젓 첨가가 김치양념 및 겉절이 김치의 품질에 미치는 영향
최택권,박소희,유진현,임호수,조재선,황성연 한국식생활문화학회 2003 韓國食生活文化學會誌 Vol.18 No.2
양념에 Leu. mesenteroides, Lac plantarum의 젖산균과 멸치액젓 첨가가 김치 양념의 대장균군 제어, 속성촉진여부 및 관능적 특성에 미치는 영향을 조사하였다. Leu. mesenteroides과 젓갈을 첨가한 경우 초기 숙성이 촉진되나 후기 산패는 완만하였으며 Lac. plantarum의 첨가시에는 초기 숙성에는 큰 차이가 없고 후기 산패가 현저하게 진행되었다. 대장균군은 산도 0.80% 이상에서 사멸되었는데 leu. mesenteroides의 경우가 숙성이 촉진되어 보다 신속히 사멸시켰다. 총균수와 젖산균수는 초기에 starter 첨가구는 10^6CFU/mL 정도인데 반해서 starter를 첨가하지 않은 않은 처리구에서 총균수는 10^6CFU/mL , 젖산균수가 10^4CFU/mL 이었고 숙성 후에는 첨가균이 높은 수준을 유지하였다. 하지만 대체적으로 스타터의 첨가가 숙성 및 대장균에 크게 영향을 주지 못하는 경향으로 동일하게 나왔다. 관능적 특성에서는 Leu. mesenteroides 첨가구가 Lac. plantarum의 경우보다 우수하였다. 한편, 시판 겉절이 김치는 산도가 0.09~0.18%, ph 5.46~5.89, 총균수 2.2×10^6~3.1×10^7CFU/mL, 젖산균수는 2.1×10^4~6.6×10^5CFU/mL, 대장균수는 1.8×10^4~7.1×10^5CFU/mL, 염분 1.89%~2.51%으로 스타터 첨가 겉절이에 비해 ph와 염도를 제외한 품질 특성에서 전반적으로 낮은 값을 나타냈다. This study was performed in order to investigate the effect of Leuconostoc mesenteroides, Lactobacillus plantarum and salt fermented anchovy extracts on Kimchi sauce. The sauce was fermented more rapidly by addition of Leu. mesenteroids or salt fermented anchovy extracts on the early fermentation stage than the control, but it was fermented slowly on the late fermentation stage. When L. plantarum was added to the Kimchi on the early fermentation stage, the acidity of Kimchi didn't show a significant difference from the control, but acidity was remarkably increased on the late stage. Coliform group was disappeared when acidity of sauce was higher than 0.8% during fermentation. It was controlled by Leu. mesenteroides but not by L. plantarum. Total count and lactic acid bacterial count of the sauces with starter were 6.30×10^6~1.0×10^7 CFU/mL and 1.04~2.04×10^6 CFU/mL, respectively, but those of the control sauce were 10^6 CFU/mL and 10^4 CFU/mL, respectively. Those count of the sauce with starter were higher than those of the control sauce on the later stage of fermentation. Organoleptic quality of the sauce with Leu. mesenteroides was superior to that with L. plantarum.
Module level EMC verification method for replacement items in nuclear power plant
Hee-Taek Lim,Moon-Gi Min,Hyun-Ki Kim,Gwang-Hyun Lee,Chae-Hyun Yang Korean Nuclear Society 2023 Nuclear Engineering and Technology Vol.55 No.7
Internal replaceable electronic module substitutions can impact EMC (ElectroMagnetic Compatibility) qualification testing and results if EMC testing is conducted at the cabinet level. The impact of component substitutions on EMC qualification results therefore should be evaluated. If a qualitative evaluation is not adequate to ensure that the modified product will not impact the cabinet level EMC qualification results, a new qualification testing should be conducted. Component level retesting should be conducted under electromagnetically equivalent conditions with the cabinet level test. This paper analyzes the propagation of conducted susceptibility test waveforms in a representative cabinet and evaluates the impact of component substitutions on cabinet level EMC qualification results according to the location of the replacement items. A guideline for a qualitative evaluation of the impact of component substitutions is described based on the propagation of the conducted susceptibility test waveforms. A module level test method is also described based on an analysis of the shielding effectiveness of the cabinet.
Analysis on operation characteristics and power burdens of the double quench trigger type SFCLs
Lim, Seung-Taek,Lim, Sung-Hun,Han, Tae-Hee The Korea Institute of Applied Superconductivity a 2017 한국초전도저온공학회논문지 Vol.19 No.2
To protect the power systems from fault current, the rated protective equipment should be installed. However growth of power system scale and concentration of loads caused the large fault current in power transmission system and distribution system. The capacities of installed protective equipment have been exceeded the due to increase of fault current. This increase is not temporary phenomenon but will be steadily as long as the industry develops. The power system operator need a counter-measurement for safety, so superconducting fault current limiter (SFCL) has been received attention as effective solutions to reduce the fault current. For the above reasons various type SFCLs have been studied recently. In this paper, operation characteristics and power burden of trigger type SFCL is studied. The trigger type SFCL has been used for real system research in many countries. Another trigger type SFCL (double quench trigger type SFCL) is also studied. For this paper, short circuit test is performed.
Ultraviolet Light Sensor Based on an Azobenzene-polymer-capped Optical-fiber End
Hee-Taek Cho,Gyeong-Seo Seo,Ok-Rak Lim,Woojin Shin,Hee-Jin Jang,Tae-Jung Ahn 한국광학회 2018 Current Optics and Photonics Vol.2 No.4
We propose a simple ultraviolet (UV) sensor consisting of a conventional single-mode optical fiber capped with an azobenzene-moiety-containing polymer. The UV light changes the dimensions of the azobenzene polymer, as well as the refractive index of the material. Incident light with a wavelength of 1550 nm was reflected at the fiber/polymer and polymer/air interfaces, and interference of the reflected beams resulted in spectral interference that shifted the wavelength by 0.78 nm at a UV input power of 2.5 mW/cm². The UV sensor’s response to wavelength is nonlinear and stable. The response speed of the sensor is limited by detection noise, which can be improved by modifying the insertion loss of the UV sensor and the signal-to-noise ratio of the detection system. The proposed compact UV sensor is easy to fabricate, is not susceptible to electromagnetic interference, and only reacts to UV light.
Dae Hee Kim,Seung-Hee Baek,Hee-young Choi,Dong Gyu Choi,Dong Cheol Lee,Se-Youp Lee,Han Woong Lim,Hyun Taek Lim,Won Yeol Ryu,Hee Kyung Yang,Key Hwan Lim 대한안과학회 2021 Korean Journal of Ophthalmology Vol.35 No.5
The Korean Intermittent Exotropia Multicenter Study (KIEMS), which was initiated by the Korean Association of Pediatric Ophthalmology and Strabismus, is a collaborative multicenter study on intermittent exotropia in Korea. The KIEMS was designed to provide comprehensive information, including subjective and objective findings of intermittent exotropia in a large study population. A total of 65 strabismus specialists in 53 institutions contributed to this study, which, to date, is one of the largest clinical studies on intermittent exotropia. In this article, we provide a detailed methodology of the KIEMS to help future investigations that may use the KIEMS data.