http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
병재배 폐톱밥을 이용한 양송이 복토재료 개발에 관한 연구
김홍규,이희덕,김용균,한규홍,문창식,김홍기 충남대학교 생물공학연구소 1999 생물공학연구지 Vol.7 No.-
애느타리 병재배후 탈병한 톱밥을 3월 중순 퇴적하여 부숙시킨 결과 퇴적기간에 따른 폐톱밥의 부숙정도는 퇴적 30일이후에 가장 컸으며 부숙 소요일수는 최소 48일이었다. 퇴적 기간에 따른 폐톱밥의 pH 및 총 질소 함량은 부숙이 진전됨에 따라 증가하는 경향이었고 총 탄소 및 C/N율은 시간이 경과함에 따라 감소하는 경향이었다. 식양토에 부숙이 완료된 톱밥을 부피 비율로 10, 30, 50%씩 첨가하여 복토 재료로 사용한 결과 30% 첨가시 식양토 단용 처리보다 A. bisporus 균사 생장이 촉진되고 초발이 소요일수가 5일 빠르며, 수량에 있어서도 28% 증수되었다. After bottle culture of Pleurotus ostreatus, sawdust was taken out from the bottle and accumulated in the middle of March, and then composted. As the result, Y value was decreased rapidly 30 days after composting, and it was decreased slowly after 30 days. It is considered that 118 days is required for composting, however, it is possible to use for casing material after at least 48 days composting. The pH and total nitrogen content of sawdust based on composting period had tendency to increase as composting was processed. Total carbon and C/N rate had tendency to decrease as time went on. Based on the rate of 10, 30 and 50%, each sawdust was added to clay loam used as casing material for culturing A. bisporrus. Among various treatments, the mycelial growth of A. bisporus was more favorable in the treatment of 30% sawdust than in the single treatment of clay loam. Based on the date necessary for primodium formation of A. bisporus, the primodium formation in the treatment of 30% sawdust was reduced to about 5 days as compared with that of any other treatments When 30% sawdust was added to clay loam used as casing material for culturing A. bisporus, the yield of its fruiting body was increased to 28%.
복합특징을 이용한 증강현실 환경에서의 견실한 마커추적 알고리즘
박규호(Gyu-Ho Park),이행석(Heng-Suk Lee),한규필(Kyu-Phil Han) 한국정보과학회 2009 한국정보과학회 학술발표논문집 Vol.36 No.2C
본 논문에서는 모서리점, 경계선 및 영역 등과 같은 복합특징을 이용하여 증강현실 시스템에서 마커의 차단현상이 발생되거나 어두운 환경에서도 사용 가능하면서 정합 성능을 개선한 마커추적 알고리즘을 제안한다. 기존의 ARToolkit에서는 마커의 일부분이 사용자에 의해 가려지거나 주위 조명 변화에 의해 입력영상의 밝기 변화가 크게 될 경우, 마커추적에서 인식되었던 마커가 사라져 버리는 불안정성 문제가 발생되었다. 그러나 제안한 마커추적 알고리즘은 이런 문제를 해결하기 위해서 마커영역만을 분리 추출한 후, 모서리 여부를 판단하고 모서리점이 가려진 경우, 추출된 직선의 교점으로부터 모서리점을 추출하므로 차단에 의해 마커가 가려졌을 때에도 정확한 마커 영역을 추출할 수 있다. 또한, 등록된 마커와의 정합시, 와핑에서 발생되는 마커의 크기 변화를 보정하는 기법을 추가하여 정합 성능을 개선시켰으며, 그 결과 객체를 안정적으로 증강시킬 수 있었다. 그리고 기존 AR시스템들은 표준조명보다 어두운 곳에서는 마커를 추출할 수 없는 반면 제안된 마커추적 알고리즘에서는 마커영역 추출시 적응적 임계값 기법을 사용하여 마커 식별이 어려울 정도의 조명에서도 마커를 인식하여 증강시킬 수 있도록 개선하였다.
증강현실 환경에서 복합특징 기반의 강인한 마커 검출 알고리즘
박규호,이행석,한규필,Park, Gyu-Ho,Lee, Heng-Suk,Han, Kyu-Phil 한국정보처리학회 2010 정보처리학회논문지 A Vol.17 No.4
본 논문에서는 모서리점, 경계선 및 영역, 적응적 임계값 등과 같은 복합특징을 이용하여 증강현실 시스템에서 마커의 차단현상이 발생되거나 어두운 환경에서도 사용 가능하면서 정합 성능을 개선한 마커검출 알고리즘을 제안한다. 기존의 ARToolkit에서는 마커의 일부분이 사용자에 의해 가려지거나 주위 조명 변화에 의해 입력영상의 밝기 변화가 크게 될 경우, 마커를 추출할 수 없는 반면 제안한 마커추적 알고리즘에서는 마커영역 추출시 적응적 임계값 기법을 사용하여 조명의 변화에 둔감하게 반응하여 정확한 마커영역만을 분리 추출할 수 있다. 그리고 모서리 여부를 판단하고 모서리점이 가려진 경우, 추출된 직선의 교점으로부터 모서리점을 추출하므로 차단에 의해 마커가 가려졌을 때에도 정확한 마커 영역을 추출할 수 있다. 또한, 등록된 마커와의 정합시, 와핑에서 발생되는 마커의 크기 및 중심위치 변화를 보정하는 기법을 추가하여 정합 성능을 개선 시켰다. 실험 결과 제안한 알고리즘은 주위 조명 변화와 차단 현상에 강인하게 마커를 검출하였으며, 유사한 마커 태그를 구분 할 수 있는 정합 유사도가 종전보다 30% 증가한 것을 확인 할 수 있었다. This paper presents an improved marker detection algorithm using hybrid features such as corner, line segment, region, and adaptive threshold values, etc. In usual augmented reality environments, there are often marker occlusion and poor illumination. However, existing ARToolkit fails to recognize the marker in these situations, especially, partial concealment of marker by user, large change of illumination and dim circumstances. In order to solve these problems, the adaptive threshold technique is adopted to extract a marker region and a corner extraction method based on line segments is presented against marker occlusions. In addition, a compensating method, corresponding the marker size and center between registered and extracted one, is proposed to increase the template matching efficiency, because the inside marker size of warped images is slightly distorted due to the movement of corner and warping. Therefore, experimental results showed that the proposed algorithm can robustly detect the marker in severe illumination change and occlusion environment and use similar markers because the matching efficiency was increased almost 30%.