http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Gerard Bois (검색결과 5 건)
- 무료
- 기관 내 무료
- 유료
-
Ramzi, Mdouki,Bois, Gerard,Abderrahmane, Gahmousse Korean Society for Fluid machinery 2011 International journal of fluid machinery and syste Vol.4 No.1
With the aim to increase blade loadings and stable operating range in highly loaded compressors, this article has been conducted to explore, through a numerical parametric study, the potential of passive control using slotted bladings in cascade configurations. The objective of this numerical investigation is to analyze the influence of location, width and slope of the slots and therefore identify the optimal configuration. The approach is based on two dimensional cascade geometry, low speed regime, steady state and turbulent RANS model. The results show the efficiency of this passive technique to delay separation and enhance aerodynamic performances of the compressor cascade. A maximum of 28.3% reduction in loss coefficient have been reached, the flow turning is increased with approximately $5^0$ and high loading over a wide range of angle of attack have been obtained for the optimized control parameter.
-
Qiaorui Si,Wenting He,Gerard Bois,Qianglei Cui,Shouqi Yuan,Keyu Zhang 한국유체기계학회 2019 International journal of fluid machinery and syste Vol.12 No.1
A two-phase liquid pumping test ring is built to study the flow induced characteristics of centrifugal pump under the air-water flow working condition. Pump performances are measured under different flow rates and different inlet air void fraction (a). Pressure pulsation signal spectrums and their probability density maps are also recorded. The calculations, using URANS k-epsilon turbulence model combined with the Euler-Euler inhomogeneous two-phase model, are also performed to obtain inner flow structure inside the impeller and volute channels under different air-water conditions in order to understand the pump characteristic evolutions. The results show that the performance of centrifugal pump is more sensitive to air inlet injection at low flow rates. The maximum air void fraction of model pump could reach 10% when the pump operates at the highest efficiency point, and the performance drops sharply when the air void fraction is more than 8%. The dominant frequency of pump outlet pressure pulsation is still at the blade passing frequency even under two-phase condition. Frequency amplitude increases with the increase of a. The greater the a, the more of low frequency appears in broadband characteristics. With the increase of a, the probability density amplitude of pressure pulsation decreases gradually, and its span becomes gradually wider as well. Comparisons between numerical local results and experimental unsteady pressure can explain part of the phenomena that are found in the present paper.
-
Nour, Fadi Abdel,Rinaldi, Andrea,Debuchy, Roger,Bois, Gerard Korean Society for Fluid machinery 2012 International journal of fluid machinery and syste Vol.5 No.2
The present study is devoted to the influence of a superposed radial inflow in a rotor-stator cavity with a peripheral opening. The flow regime is turbulent, the two boundary layers being separated by a core region. An original theoretical solution is obtained for the core region, explaining the reason why a weak radial inflow has no major influence near the periphery of the cavity but strongly affects the flow behavior near the axis. The validity of the theory is tested with the help of a new set of experimental data including the radial and tangential mean velocity components, as well as three components of the Reynolds stress tensor measured by hot-wire anemometry. The theoretical results are also in good agreement with numerical results obtained with the Fluent code and experimental data from the literature.
-
Leakage Flow Influence on SHF pump model performances
Dupont, Patrick,Bayeul-Laine, Annie-Claude,Dazin, Antoine,Bois, Gerard,Roussette, Olivier,Si, Qiaorui Korean Society for Fluid machinery 2015 International journal of fluid machinery and syste Vol.8 No.4
This paper deals with the influence of leakage flow existing in SHF pump model on the analysis of internal flow behaviour inside the vane diffuser of the pump model performance using both experiments and calculations. PIV measurements have been performed at different hub to shroud planes inside one diffuser channel passage for a given speed of rotation and various flow rates. For each operating condition, the PIV measurements have been trigged with different angular impeller positions. The performances and the static pressure rise of the diffuser were also measured using a three-hole probe. The numerical simulations were carried out with Star CCM+ 9.06 code (RANS frozen and unsteady calculations). Some results were already presented at the XXth IAHR Symposium for three flowrates for RANS frozen and URANS calculations. In the present paper, comparisons between URANS calculations with and without leakages and experimental results are presented and discussed for these flow rates. The performances of the diffuser obtained by numerical calculations are compared to those obtained by the three-holes probe measurements. The comparisons show the influence of fluid leakages on global performances and a real improvement concerning the efficiency of the diffuser, the pump and the velocity distributions. These results show that leakage is an important parameter that has to be taken into account in order to make improved comparisons between numerical approaches and experiments in such a specific model set up.
-
Leakage Flow Influence on SHF pump model performances
Dupont, Patrick,Bayeul-Laine, Annie-Claude,Dazin, Antoine,Bois, Gerard,Roussette, Olivier,Si, Qiaorui Korean Society for Fluid machinery 2015 International journal of fluid machinery and syste Vol.8 No.3
This paper deals with the influence of leakage flow existing in SHF pump model on the analysis of internal flow behaviour inside the vane diffuser of the pump model performance using both experiments and calculations. PIV measurements have been performed at different hub to shroud planes inside one diffuser channel passage for a given speed of rotation and various flow rates. For each operating condition, the PIV measurements have been trigged with different angular impeller positions. The performances and the static pressure rise of the diffuser were also measured using a three-hole probe. The numerical simulations were carried out with Star CCM+ 9.06 code (RANS frozen and unsteady calculations). Some results were already presented at the XXth IAHR Symposium for three flowrates for RANS frozen and URANS calculations. In the present paper, comparisons between URANS calculations with and without leakages and experimental results are presented and discussed for these flow rates. The performances of the diffuser obtained by numerical calculations are compared to those obtained by the three-holes probe measurements. The comparisons show the influence of fluid leakages on global performances and a real improvement concerning the efficiency of the diffuser, the pump and the velocity distributions. These results show that leakage is an important parameter that has to be taken into account in order to make improved comparisons between numerical approaches and experiments in such a specific model set up.
ScienceON
DBpia연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
