http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
李德出 단국대학교 1977 論文集 Vol.11 No.-
In high voltage insulation, the dielectric Breakdown of polymeric material is initiated of ten by the gaseous partial discharge at the surface or in the void. It is important from these view points to clearify the electric conduction of polymer not only on the MIM structure but also on the specimen on the naked surface of which gaseous ion are accumulated. The electric usually decreased with time a minute after The supply of ions. From the results of experiment, it is clear that the higher the potential difference and the higher the temperature, the electric current approached to the constant value within the shorter time. And electric charges accumulating on polyethylene surface diminish exponentially with time when the field is low. and the electric current is governed by the trap filled space charged limited current with the limited quantity of injected carriers.
The effect of cooling rate on electrical properties of ZnO varistor for Fire Alarm Circuit
Lee,Duck-Chool,Kim,Yong-Hyuk,Chu,Soon-Nam 한국화재소방학회 1996 한국화재소방학회논문지 Vol.10 No.4
본 연구에서는 화재 감지 회로 등에 사용되는 ZnO 바리스터의 제조과정중 냉각 속도가 전기적 특성에 미치는 영향에 대하여 조사한 것이다. 냉각 속도의 변화에 따른 시편의 미세구조, 전압-전류 특성, 복합임피던스 측정을 하였다. 냉각 속도 <TEX>$200^{\circ}$</TEX>/h에서 비오옴계수나 바리스터 동작 전압의 최대치를 나타내었다. 이것은 냉각과정 중 형성된 결정입계에 성질에 의존됨을 알았다. 복합임피던스는 100Hz-13MHz의 주파수 범위에서 측정하였으며, 반원의 특성을 검토한 결과 결정립이나 결정입계의 저항이 냉각 속도에 크게 의존되고 있음을 확인하였다. The aim of the present study is to find out the effect of cooling rate on the electrical behavior of ZnO varistors. The microstructure, 1-V characteristics and complex impedance spectra were investigated under the change of cooling rates. It is found that at cooling rate <TEX>$200^{\circ}$</TEX>/h, nonlinearity and breakdown voltage reached a maximum value which may show that good intergranular layer is formed as a results of proper cooling rate. Complex Impedance spectras were measured as a function of frequency range 100Hz to 13MHz to determine grain and grainboundary resistance. The semicircles were attributed to the dependence of grain and grainboundary resistance on cooling rates.
진공증착중합법에 의해 제조된 PMDA / 4,4'-DDE 폴리이미드의 내열 특성
김형권,이은학,우호환,김종석,이덕출 (사단법인)韓國火災 ·消防學會 1996 한국화재소방학회논문지 Vol.10 No.3
The Polyimide thin films based on PMDA and 4,4'-DDE were fabricated by VDPM, and their heat resistance characteristics were invastigated by TGA(Thermogaravimetry Analyzer). It was found that deposition rate decreased with increasing substrate temperature and the thin films were not fabricated over the substrate temperature of 70℃. T_TG of 5% weight loss temperature is 565℃, 397℃ and 210℃ at the substrate temperature of 20℃, 40℃ and 70℃, respectively. It is realized that the endurace temperature for 20,000 hour of thin films fabricated at 20℃ and 40℃ is 230℃ and 200℃, respectively.
The effect of cooling rate on electrical properties of ZnO varistor for Fire Alarm Circuit
Lee, Duck-Chool,Kim, Yong-Hyuk,Chu, Soon-Nam Korean Institute of Fire Science and Engineering 1996 한국화재소방학회논문지 Vol.10 No.4
본 연구에서는 화재 감지 회로 등에 사용되는 ZnO 바리스터의 제조과정중 냉각 속도가 전기적 특성에 미치는 영향에 대하여 조사한 것이다. 냉각 속도의 변화에 따른 시편의 미세구조, 전압-전류 특성, 복합임피던스 측정을 하였다. 냉각 속도 $200^{\circ}$/h에서 비오옴계수나 바리스터 동작 전압의 최대치를 나타내었다. 이것은 냉각과정 중 형성된 결정입계에 성질에 의존됨을 알았다. 복합임피던스는 100Hz-13MHz의 주파수 범위에서 측정하였으며, 반원의 특성을 검토한 결과 결정립이나 결정입계의 저항이 냉각 속도에 크게 의존되고 있음을 확인하였다. The aim of the present study is to find out the effect of cooling rate on the electrical behavior of ZnO varistors. The microstructure, 1-V characteristics and complex impedance spectra were investigated under the change of cooling rates. It is found that at cooling rate $200^{\circ}$/h, nonlinearity and breakdown voltage reached a maximum value which may show that good intergranular layer is formed as a results of proper cooling rate. Complex Impedance spectras were measured as a function of frequency range 100Hz to 13MHz to determine grain and grainboundary resistance. The semicircles were attributed to the dependence of grain and grainboundary resistance on cooling rates.