Preparation of lithium-doped NaV6O15 thin film cathodes with high cycling performance in SIBs

Xu Hai-Yan,Ruan Jun Hai,Liu Fang Lin,Li Dong-Cai,Zhang Feng-Jun,Wang Ai-Guo,Sun Dao-Sheng,오원춘 한국세라믹학회 2022 한국세라믹학회지 Vol.59 No.3

Lithium ions-doped NaV6O15 thin films have been prepared using a simple low temperature liquid phase deposition method and subsequent annealing process. X-ray diffraction (XRD), Fourier transform infrared spectrometer (FTIR), scanning elec- tron microscopy (SEM), and photoelectron spectroscopy (XPS) have been used to study the structural and physicochemical characteristics of the NaV6O15 film. The films were grown on the FTO conductive glass and used directly as an electrode of sodium ion batteries. The prepared lithium ions-doped NaV6O15 thin film electrodes showed an excellent cycling stability and discharge capacity, which may be attributed to the stability of the Li+ embedded into the gap between the V–O layers to maintain the structure and its stable β-phase structure transformed after the first cycle. The cycling stability greatly improved with increasing annealing temperature, while the discharge capacity decreased. The capacities of the film electrodes annealed at 400 °C and 450 °C maintained above 97% after 100 cycles. The lithium-doped NaV6O15 underwent a phase transition dur- ing the first charge/discharge cycle. The new transformed phase has perfect crystal structure stability undergoing insertion and deinsertion of Na+. Therefore, the lithium-doped NaV6O15 thin film possesses good cycling stability and is expected to be a promising thin film cathode for sodium-ion batteries.

Structural health monitoring of innovative civil engineering structures in Mainland China

Li, Hong-Nan,Li, Dong-Sheng,Ren, Liang,Yi, Ting-Hua,Jia, Zi-Guang,LI, Kun-Peng Techno-Press 2016 Structural monitoring and maintenance Vol.3 No.1

This paper describes the backgrounds, motivations and recent history of structural health monitoring (SHM) developments to various types of engineering structures. Extensive applications of SHM technologies in bridges, high-rise buildings, sport avenues, offshore platforms, underground structures, dams, etc. in mainland China are summarily categorized and listed in tables. Sensors used in implementations, their deployment, damage identification strategies if applicable, preliminary monitoring achievements and experience are presented in the lists. Finally, existing problems and promising research efforts in civil SHM are discussed, highlighting challenges and future trends.

Influence of Intravenous Contrast Medium on Dose Calculation Using CT in Treatment Planning for Oesophageal Cancer

Li, Hong-Sheng,Chen, Jin-Hu,Zhang, Wei,Shang, Dong-Ping,Li, Bao-Sheng,Sun, Tao,Lin, Xiu-Tong,Yin, Yong Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.3

Objective: To evaluate the effect of intravenous contrast on dose calculation in radiation treatment planning for oesophageal cancer. Methods: A total of 22 intravein-contrasted patients with oesophageal cancer were included. The Hounsfield unit (HU) value of the enhanced blood stream in thoracic great vessels and heart was overridden with 45 HU to simulate the non-contrast CT image, and 145 HU, 245 HU, 345 HU, and 445 HU to model the different contrast-enhanced scenarios. 1000 HU and -1000 HU were used to evaluate two non-physiologic extreme scenarios. Variation in dose distribution of the different scenarios was calculated to quantify the effect of contrast enhancement. Results: In the contrast-enhanced scenarios, the mean variation in dose for planning target volume (PTV) was less than 1.0%, and those for the total lung and spinal cord were less than 0.5%. When the HU value of the blood stream exceeded 245 the average variation exceeded 1.0% for the heart V40. In the non-physiologic extreme scenarios, the dose variation of PTV was less than 1.0%, while the dose calculations of the organs at risk were greater than 2.0%. Conclusions: The use of contrast agent does not significantly influence dose calculation of PTV, lung and spinal cord. However, it does have influence on dose accuracy for heart.

Reviews on innovations and applications in structural health monitoring for infrastructures

Li, Hong-Nan,Yi, Ting-Hua,Ren, Liang,Li, Dong-Sheng,Huo, Lin-Sheng Techno-Press 2014 Structural monitoring and maintenance Vol.1 No.1

The developments and implementations of the structural health monitoring (SHM) system for large infrastructures have been gradually recognized by researchers, engineers and administrative authorities in the last decades. This paper summarizes an updated review on innovations and applications in SHM for infrastructures carried out by researchers at Dalian University of Technology. Invented sensors and data acquisition system are firstly briefly described. And then, some proposed theories and methods including the sensing technology, sensor placement method, signal processing and data fusion, system identification and damage detection are discussed in details. Following those, the activities on the standardization of SHM and several case applications on specific types of structure are reviewed. Finally, existing problems and promising research efforts in the field of SHM are given.

Experimental hysteretic behavior of in-plane loaded reinforced grouted multi-ribbed aerated concrete blocks masonry walls

Li, Sheng-Cai,Dong, Jian-Xi,Li, Li-Feng Techno-Press 2012 Structural Engineering and Mechanics, An Int'l Jou Vol.41 No.1

In order to analyze the experimental hysteretic behavior of the in-plane loaded reinforced grouted multi-ribbed aerated concrete blocks masonry walls (RGMACBMW), we have carried out the pseudo static testing on the six specimens of RGMACBMW. Based on the test results and shear failure characteristics, the shear force hysteretic curves and displacement envelope curves of the models were obtained and discussed. On the basis of the hysteretic curves a general skeleton curve of the shear force and displacement was formed. The restoring model was adopted to analyze the seismic behavior and earthquake response of RGMACBMW. The deformation capacity of the specimens was discussed, and the formulas for calculating the lateral stiffness of the walls at different loading stages were proposed as well. The average lateral displacement ductility factor of RGMACBMW calculated based on the test results was 3.16. This value illustrates that if the walls are appropriately designed, it can fully meet the seismic requirement of the structures. The quadri-linear restoring models of the walls degradation by the test results accurately reflect the hysteretic behaviors and skeleton curves of the masonry walls. The restoring model can be applied to the RGMACBMW structure in earthquake response analysis.

Experimental and numerical validation of guided wave based on time-reversal for evaluating grouting defects of multi-interface sleeve

Dong-Sheng Li,Jiahe Liu,Li Tang,Wei Shen 국제구조공학회 2024 Smart Structures and Systems, An International Jou Vol.33 No.1

Grouting sleeves are an essential connecting component of prefabricated components, and the quality of grouting has a significant influence on structural integrity and seismic performance. The embedded grouting sleeve (EGS)'s grouting defects are highly undetectable and random, and no effective monitoring method exists. This paper proposes an ultrasonic guided wave method and provides a set of guidelines for selecting the optimal frequency and suitable period for the EGS. The optimal frequency was determined by considering the group velocity, wave structure, and wave attenuation of the selected mode. Guided waves are prone to multi-modality, modal conversion, energy leakage, and dispersion in the EGS, which is a multi-layer structure. Therefore, a time-reversal (TR)-based multi-mode focusing and dispersion automatic compensation technology is introduced to eliminate the multi-mode phase difference in the EGS. First, the influence of defects on guided waves is analyzed according to the TR coefficient. Second, two major types of damage indicators, namely, the time domain and the wavelet packet energy, are constructed according to the influence method. The constructed wavelet packet energy indicator is more sensitive to the changes of defecting than the conventional time-domain similarity indicator. Both numerical and experimental results show that the proposed method is feasible and beneficial for the detection and quantitative estimation of the grouting defects of the EGS.

Experimental hysteretic behavior of in-plane loaded reinforced grouted multi-ribbed aerated concrete blocks masonry walls

Sheng-Cai Li,Jian-Xi Dong,Li-Feng Li 국제구조공학회 2012 Structural Engineering and Mechanics, An Int'l Jou Vol.41 No.1

In order to analyze the experimental hysteretic behavior of the in-plane loaded reinforced grouted multi-ribbed aerated concrete blocks masonry walls (RGMACBMW), we have carried out the pseudo static testing on the six specimens of RGMACBMW. Based on the test results and shear failure characteristics, the shear force hysteretic curves and displacement envelope curves of the models were obtained and discussed. On the basis of the hysteretic curves a general skeleton curve of the shear force and displacement was formed. The restoring model was adopted to analyze the seismic behavior and earthquake response of RGMACBMW. The deformation capacity of the specimens was discussed, and the formulas for calculating the lateral stiffness of the walls at different loading stages were proposed as well. The average lateral displacement ductility factor of RGMACBMW calculated based on the test results was 3.16. This value illustrates that if the walls are appropriately designed, it can fully meet the seismic requirement of the structures. The quadri-linear restoring models of the walls degradation by the test results accurately reflect the hysteretic behaviors and skeleton curves of the masonry walls. The restoring model can be applied to the RGMACBMW structure in earthquake response analysis.

Experimental axial force identification based on modified Timoshenko beam theory

Li, Dong-sheng,Yuan, Yong-qiang,Li, Kun-peng,Li, Hong-nan Techno-Press 2017 Structural monitoring and maintenance Vol.4 No.2

An improved method is presented to estimate the axial force of a bar member with vibrational measurements based on modified Timoshenko beam theory. Bending stiffness effects, rotational inertia, shear deformation, rotational inertia caused by shear deformation are all taken into account. Axial forces are estimated with certain natural frequency and corresponding mode shape, which are acquired from dynamic tests with five accelerometers. In the paper, modified Timoshenko beam theory is first presented with the inclusion of axial force and rotational inertia effects. Consistent mass and stiffness matrices for the modified Timoshenko beam theory are derived and then used in finite element simulations to investigate force identification accuracy under different boundary conditions and the influence of critical axial force ratio. The deformation coefficient which accounts for rotational inertia effects of the shearing deformation is discussed, and the relationship between the changing wave speed and the frequency is comprehensively examined to improve accuracy of the deformation coefficient. Finally, dynamic tests are conducted in our laboratory to identify progressive axial forces of a steel plate and a truss structure respectively. And the axial forces identified by the proposed method are in good agreement with the forces measured by FBG sensors and strain gauges. A significant advantage of this axial force identification method is that no assumption on boundary conditions is needed and excellent force identification accuracy can be achieved.

전략적 반덤핑정책과 최적관세

이동생(Dong-Sheng Li),이종민(Jong-Min Lee) 한국관세학회 2015 관세학회지 Vol.16 No.3

Dumping actions and anti-dumping policies were still on the political agenda in many developed countries. In this paper, we consider the incentives that the existence of an AD duties provides for strategic behaviour on the part of duopoly firms selling in each other’s segmented markets. We view dumping as a sign of price discrimination across national markets, and consider a world composed of two country markets ,with one firm located in each. Firms are Cournot competitors or Stackelberg leader-follower, producing an homogeneous goods which they sell in both markets, which differ in terms of size. In free trade the country with the larger market has the higher price and the firm located in that country ‘dumps’ on the other market. The objectives of this research are first to derive the optimal AD duties which maximize an importing country’s national welfare based on the competition types between firms, and then to explore comparative statics of the optimal AD duties by changes in economic parameters. Also, the results of the simulation show how the optimal AD duties and the welfare of importers change when the market share changes.

Preoperative Prealbumin Level as an Independent Predictor of Long-Term Prognosis after Curative Liver Resection of Hepatocellular Carcinoma (a Multicenter Study of 1,483 Patients)

( Ju-dong Li ),( Xin-fei Xu ),( Jiong-jie Yu ),( Jia-he Wang ),( Li- Yang Sun ),( Wen-tao Yan ),( Bing Quan ),( Jian-hong Zhong ),( Yi-sheng Huang ),( Ya-hao Zhou ),( Ting-hao Chen ),( Hong Wang ),( W 대한간학회 2018 춘·추계 학술대회 (KASL) Vol.2018 No.1

Aims: Serum prealbumin is more sensitive to profile nutritional status and liver function than albumin, which could hardly be affected by infusion supplement. This study aims: to identify the relationship between preoperative prealbumin level and the long-term prognosis after curative resection of hepatocellular carcinoma (HCC). Methods: Patients undergone HCC curative resection between 2001 and 2014 at six institutions in China were enrolled. By using 170 mg/dl as cut-off value of serum prealbumin level, these patients were divided into the low and normal preoperative prealbumin groups. The overall survival (OS) and recurrence-free survival (RFS) were analyzed and compared. Univariable and multivariable Cox-regression analyses were performed to identify predictive factors of OS and RFS. Results: Among 1,483 patients, 437 (29.5%) had a low prealbumin level within a week before surgery. The 1-, 3-, and 5-year OS and RFS rates of patients in the low prealbumin group were 83.8, 57.0, and 31.1%, and 67.0, 39.8, and19.9%, respectively, which was significantly poorer than those in the normal group (93.0, 75.5, and 42.6%, and 77.0, 56.4, and 28.4%, both P<0.001). Multivariable analyses revealed that preoperative prealbumin level, but not albumin level, was an independent predictor of OS (HR, 1.789; 95% CI: 1.544 -2.072, P<0.001) and RFS (HR, 1.420; 95% CI: 232-1.636, P<0.001). Conclusions: Preoperative prealbumin level is useful for predicting long-term prognosis in patients undergoing liver resection for HCC. Prealbumin may be suitable to displace albumin, yielding to an updated Child-Pugh grade for accessing liver function.