http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Dagyeong Jeong,Hong Hyeon Park,Gwan-Seok Lee,In Hong Jeong,Min Hyeuk Lee 한국응용곤충학회 2023 한국응용곤충학회 학술대회논문집 Vol.2023 No.10
Ctenoplusia agnata (Lepidoptera: Noctuidae) is a polyphagous pest that damage on crops belonging to the Fabaceae and Brassicaceae, and it is known as a migratory pest. In this study, we investigated pattern of occurrence to trace invasion characteristics using sex pheromone traps and conducted genetic analysis of captured individuals while also exploring their correlation with air currents. Our findings suggest that C.agnata exhibits an annual occurrence of four generations in Korea, with the second or third generation, primarily active from July to September, posing a significant threat to soybean. Genetic analysis revealed the presence of 17 haplotypes, and trajectory modeling confirmed the influence of air currents from Kyushu, Japan and Zhejiang, China etc. These results are expected to be used as a comprehensive management of C.agnata and other migratory moth species.
Natural enemy utilization technology for environment-friendly strawberry production in greenhouse
Chae Hoon Paik,Hong Hyun Park,Jeong Hwan Kim,Meeja Seo,Dagyeong Jeong,In Hong Jeong,Min Hyeuk Lee,Gwan Seok Lee 한국응용곤충학회 2023 한국응용곤충학회 학술대회논문집 Vol.2023 No.10
2022년 10월부터 2023년 5월까지 친환경 딸기재배 농가에서 점박이응애는 칠레이리애응애와 사막이리응애, 진딧물은 콜레마니진디벌을 대상으로 하는 천적처리구와 유기농자재를 사용하는 관행방제구에서 천적의 해 충 밀도억제 효과를 조사하였다. 천적처리구에서 점박이응애 성충 밀도는 잎당 1.5마리 이하, 알은 4개 이하로 관리되었고, 사막이리응애는 잎당 최대 0.4마리까지 증가하여 점박이응애 밀도억제에 많은 영향을 미친것으로 보인다. 반면, 관행방제구에서 점박이응애 밀도는 천적 방사구에 비하여 오히려 많은 발생량을 보였지만, 3월 9일부터는 사막이리응애의 증가와 유기농자재의 효과로 점박이응애 밀도는 급격하게 감소하였다. 진딧물 천적 처리구에서 진딧물 밀도는 1월부터 발생하였으며 3월 상순에 잎당 0.3마리까지 증가하였으나 이후 감소하였고, 콜레마니진디벌은 진딧물 발생이 많지 않아 3.9마리/㎡(2회) 방사하는 데 그쳤다. 한편, 관행방제구 포장의 진딧 물은 유기농자재의 영향으로 거의 발생하지 않았다.
Effect of MgO-CaO-Al2O3-SiO2 glass additive on densification of Al2O3 ceramics
Dagyeong Lee,Hyun Seon Hong,Hyeondeok Jeong,Sung-Soo Ryu 한양대학교 세라믹연구소 2022 Journal of Ceramic Processing Research Vol.23 No.2
We investigated the effect of the MgO-CaO-Al2O3-SiO2 (MCAS) additive on the densification of Al2O3 ceramics. MCAS wassynthesized using a polymeric-complex method. We analyzed the densification behavior, using dilatometric analysis up to1600 oC, and the results showed that sinterability increased with increasing MCAS content. Al2O3 samples were prepared byisothermal sintering at 1400, 1500, and 1600 oC. The microstructure, phase formation, and hardness of the samples wereanalyzed and discussed in relation to both the MCAS content and sintering temperature. The density of the MCAS-dopedsamples sintered at 1500 and 1600 oC was over 98%, and the maximum relative density was 99.7%. The highest hardness (18GPa) was achieved for the sample prepared with 3 wt.% MCAS and sintered at 1500 oC for 1 h because further dopingresulted in excessive grain growth. These results elucidate the conditions required for pressure-free sintering.
HIPVs enhanced biocontrol potential of a larval parasitoid, Exorista japonica
Meeja Seo,Dagyeong Jeong,In Hong Jeong,Gwan Seok Lee,Hong Hyun Park 한국응용곤충학회 2023 한국응용곤충학회 학술대회논문집 Vol.2023 No.10
We investigated the behavioral attractive responses of a lepidopteran larva parasite, Exorista japonica to 10 synthetic herbivore-induced plant volatiles (HIPVs). These synthetic HIPVs have been revealed the attractive effect on several parasites. For each of the HIPVs, we asked the following two questions : (1) Which volatiles show the attractiveness to this parasitoid, (2) Whether the attractant directly or indirectly affects the host settlement and parasitism of the parasitoid. To experimentally address these questions, we performed 2 and 4 choice indoor cage tests. E. japonica adults were significantly attracted to benzaldehyde and (Z)-3-hexen-1-ol showing higher settlement and parasitic rates on Spodoptera litura of treatments. Compared to the untreated plots, the average parasitism of E. japonica on S. litura larvae in the benzaldehyde treatments increased by approximately 20%.
Ahn, Soonjae,Choi, Dagyeong,Kim, Jongman,Kim, Seongjung,Jeong, Youngjae,Jo, Min,Kim, Youngho MYU K.K. 2018 Sensors and materials Vol.30 No.8
<P>In this study, a pre-impact fall detection algorithm using a custom-made inertial sensor was optimized, and a spring-trigger airbag system was developed for preventing injuries from falls. Four different types of simulated falls were performed by 20 healthy volunteers (age 23.4 +/- 4.4 years), and six different daily activities were tested in 14 elderly subjects (age 71.8 +/- 4.0 years). An inertial sensor unit was used to measure acceleration, angular velocity, and vertical angle during all activities. Thresholds of 0.9 g acceleration, 47.3 degrees/s angular velocity, and 24.7 degrees vertical angle were determined on the basis of optimizing lead time and accuracy in pre-impact fall detection. A belt-type airbag system consisted of a polyurethane inner skin, an artificial leather outer shell, and a spring-trigger inflator. To evaluate the accuracy of the airbag system, 10 healthy adult males (age 28.5 +/- 2.7 years) wore the system and performed three sets of simulated falls. Fall detection was achieved 401.9 +/- 46.9 ms before impact on average, and the airbag inflated without fail during the falls (100% sensitivity). In all daily activities, no airbag inflation occurred (100% specificity).</P>