http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
돼지에서 정맥, 근육 그리고 경구 투여시의 enrofloxacin의 약물동태학
윤효인,김무열,박승춘,조준형,박병권,이내경,노상석,장범수,신광순,조명행 충남대학교 수의과대학 동물의과학연구소 1996 動物醫科學硏究誌 Vol.4 No.-
In order to characterize pharmacokinetic profiles according to route of a new enrofloxacin salt form (Enrotil®), it was given to 4 healthy pigs via oral (p.o.), intramuscular (i.m.) or intravenous (i.v.) administrations at a dose rate of 5 ㎎/㎏ body weight. Enrofloxacin (ENFX) in serum was detected by bioassay using E. coli BE1186 as a test organism. The biological elimination half-lives (t_1/2(β)) of ENFX were 6.76±0.99 h (i.v.), 7.16±2.30 h (i.m.) and 11.45±3.90 h (p.o.), Volume of distribution (Vd) of enrofloxacin was 2.20±0.31 L/㎏ (i.v.), 2.52±0.60 L/㎏ (i.m.) and 1.88±0.33 L/㎏ (i.m.). Mean residence time (MRT) was 8.77±1.26 h after i.v. injection and the maximal concentration time (Tmax) following p.o. and i.m. administration was 0.76±0.09 h and 0.60±0.12 h, indicating a rapid absorption from these routes. Bioavailibility (F) was calculated as 64.1% for p.o. administration and 59.71% for i.m. injections. In summary, the newly formulated enrofloxacin salt form has shown a high water solubility, rapid absorption and large tissue distribution, suggesting a potential antibacterials for oral application on a large scale in veterinary sectors.
Thermal Storage Effect Analysis of Floor Heating Systems Using Latent Heat Storage Sheets
Beom Yeol Yun,Sungwoong Yang,Hyun Mi Cho,Seunghwan Wi,Sumin Kim 한국정밀공학회 2019 International Journal of Precision Engineering and Vol.6 No.4
The thermal energy storage (TES) is an energy storage method implemented to reduce the heating energy consumption of buildings by utilizing a high-efficiency heating system and a TES system. Therefore, in this study, a TES system is applied to a high-efficient floor heating system. Various methods are available to utilize the sensible heat and latent heat for TES, and a phase change material (PCM) that can store the latent heat is used in this study. The PCM is used in the form of a heat storage sheet. The physical property analysis results show that the phase change interval of the PCM was 17–32 °C, the latent heat amount was 40.39 J/g, and the specific heat was 1.5 J/(g K). The dynamic heat analysis confirmed the peak temperature rise during heating, and the maximum value at the surface was 1.04 °C. In addition, during cooling, a cooling delay time of up to 5 h was observed due to the heat storage effect of the PCM. Therefore, it is possible to store thermal energy by using a material called PCM, and the saved heat energy can reduce the heating energy requirement of buildings.
CLT 주택의 리트로핏 시나리오에 따른 건물에너지 저감 평가
윤범열 ( Beom Yeol Yun ),김영욱 ( Young Uk Kim ),양성웅 ( Sungwoong Yang ),위승환,장성진 ( Seong Jin Chang ),김수민 ( Sumin Kim ) 한국목재공학회 2022 한국목재공학회 학술발표논문집 Vol.2022 No.1
탄소배출감축의 필요성이 증가함에 따라 정부에서는 탄소배출감소 목표치를 (Nationally Determined Contributions; NDC) 2018년 대비 40% 감축하는 것으로 상향하였다. 이러한 목표를 달성하기 위하여 건축분야에서도 탄소배출을 줄이고자하는 연구가 확산되고 있으며, 대표적으로 저탄소 건축자재인 목재가 주목받고 있다. 목재의 경우 거의 모든 건물에서 사용되는 콘크리트보다 동일 무게 생산 및 사용 시 낮은 탄소배출량을 가지는 자재이다. 이전까지 목재는 건물의 내외장재와 같이 하중을 받지 않는 마감재로만 사용이 되었으나 Cross laminated timber (CLT)와 같은 공학목재가 개발되어 현재는 고층건물의 구조재로도 사용되어지고 있다. 본 연구에서는 CLT를 활용하여 지어진 단독주택의 실내 환경에 대한 분석을 수행하고자 열관류율, 공기질, PMV, 열화상이미지 등의 측정을 진행하였다. 측정결과 단열성능 및 기밀성능의 개선이 요구되었다. 건물에너지 시뮬레이션인 Design builder를 활용하여 단열성능과 기밀성능의 리트로핏에 대한 시나리오를 구성하여 개선 전·후의 건물에너지 사용량의 차이를 분석하였다. 추가적으로 빈 공동 부분에의 축열성능을 보강하는 시나리오로 총 3가지의 개선 시나리오를 통해 CLT 목조주택이 분석되었다. 분석결과로 단열보강 및 기밀보강은 약 70%의 건물에너지를 줄일 수 있었으며, 축열을 통한 추가 개선을 통해 약 6%의 건물에너지 사용이 감소됨을 확인하였다. 이를 통해 국내 CLT 목조주택에서 단열 및 축열 확보를 위한 건물 시공 디테일이 요구되며, 적절하게 시공된 목조주택은 열적으로 쾌적하며 에너지 절감 및 탄소배출을 줄일 수 있음이 확인되었다.