http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강경구,방세윤,윤경구,황경현,이성국 동국대학교 산업기술연구원 1997 산업기술논문집 Vol.9 No.-
레이저 가공시 조사되는 레이저 빔의 특성을 나타내는 변수 - 예를 들면, 빔의 형상, 초점면과 소재사이의 거리, 빔 강도 분포, 빔의 발산각, 실제 빔이 퍼져가는 양상이 이상적인 Gaussian 빔에 비해 얼마나 큰지를 나타내는 beam quality factor 등 - 이 가공결과에 큰 영향을 미치는 것은 경험적으로 잘 알려져 있다. 특히 원적외선 레이저로 천공, 에칭 또는 엑사이머 레이저로 ablation 가공을 수행할 때는 이러한 빔특성 변수의 영향이 극대화된다. 본 연구에서는 중요한 빔특성 변수의 영향을 가능한 독립시켜 정성적 및 정량적으로 파악하기 위해 연속발진 모드의 레이저빔 사용시 열전도에 의한 손실을 고려하였으며, 문제를 단순화해 빔 또는 가공소재의 상대적인 움직임이 없는 천공 (또는 에칭제거)의 경우에 대하여, 수치모사를 통해 여러 가지 빔 변수의 변화가 가공결과에 미치는 영향을 살펴보았다. 레이저 빔의 초점의 위치를 표면에서 멀리하면 가공깊이는 감소하게 되며, 같은 간격일 때는 소재의 내부에 위치시키는 것이 다소 유리하다. 또한 빔의 발산각이 작고, beam quality factor 값이 1에 가까울수록 깊은 가공을 얻을 수 있음을 파악하였다. In laser machining such as drilling with CO_2 or Nd:YAG laser, and etching or ablation with Excimer laser, one of the most important parameters affecting the machining results is known to be beam characteristics. In this paper a study is performed through a numerical simulation with the appropriate model to investigate the effects of beam parameters qualitatively and quantitatively, especially in the process of laser drilling of ceramics and ceramic composites. Results of different beam conditions reveal that the machined hole becomes deeper as (ⅰ) the beam divergence gets smaller,(ⅱ) beam quality factor approaches unity, and (ⅲ) beam focus lies nearer to the surface of the workpiece.
분광 엘립소메트리의 응용을 위한 0차 Retardation Plate의 Alignment
이용달,박명규,김세덕,방경윤,안일신 한양대학교 이학기술연구소 2000 이학기술연구지 Vol.2 No.
A zero-order retarder was fabricated using two pieces of magnesium fluoride plates. In order to achieve desired zero-order retardation for specific wavelength, both the thickness of plates and the alignment of two fast axes were very important. We found that the alignment should be checked using broad band detection system for spectroscopic application, We devised alignment method by which the two fast axes lie perpendicularly to each other. The periodic oscillation feature in retardation angle versus wavelength disappeared with good alignment. We also developed calibration method to deduce the retardation angle over a wider spectral range using rotating compensator ellipsometer. 두 조각의 마그네슘 플로라이드 판을 이용한 0차 retarder를 제작하였다. 특정한 파장에 대하여 원하는 0차 retardation을 얻기 위해서는 판의 두께와 alignment가 매우 중요하였다. 분광학적인 응용을 위해서는 넓은 파장 영역을 측정할 수 있는 detection system의 사용이 필요하였다. 이를 이용하여 두 판의 fast axes가 서로 수직으로 놓이게 할 수 있는 alignment 방법을 개발하였다. 파장에 대한 retardation 각도에서의 주기적인 진동의 모양은 alignment를 잘하게 되면 사라지게 된다. 또한 rotating compensator ellipsometer를 사용 할 때 넓은 분광영역에 걸친 retardation angle을 측정해 낼 수 있는 calibration 방법을 개발하였다.
A Case of Pandemic 2009 H1N1 Influenza A Manifestation as Apical Ballooning Syndrome
Se Yoon Park,Eun Jung Lee,Duk Won Bang,Tae Hyong Kim,Yang Ki Kim,Jin Wook Chung,Min Su Hyon 순천향대학교 순천향의학연구소 2011 Journal of Soonchunhyang Medical Science Vol.17 No.1
Critical ill patients with pandemic 2009 H1N1 influenza A are associated with mortality, including cardiovascular, respiratory and renal dysfunction. Understanding of risk factor and clinical manifestation that suggest a higher mortality can recognize high risk patients earlier. There are many reports for severe acute respiratory distress syndrome, multiple organ failure and renal failure with pandemic 2009 H1N1 influenza A. But cardiovascular disease with pandemic 2009 H1N1 influenza A remains unknown. This is the report of pandemic 2009 H1N1 influenza A association with apical balloning syndrome.