http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
인공위성용 홀 추력기의 중성기체에 대한 분자동력학 시뮬레이션
송인철,배효원,박정후,이호준,이해준,Song, In-Cheol,Bae, Hyo-Won,Park, Chung-Hoo,Lee, Ho-Jun,Lee, Hae-June 한국진공학회 2010 Applied Science and Convergence Technology Vol.19 No.2
소형위성의 추력시스템으로 사용되어지는 홀 추력기의 중성 기체 시뮬레이션을 수행하였다. 홀 추력기의 채널 내부에서의 난반사효과 및 초기 가스의 온도, 그리고 채널의 길이 등을 변수로 하여 계산되어진 밀도, 압력, 속도, 온도를 분석 하였다. 시뮬레이션에서 얻어진 결과를 통해 홀 추력기의 방전 시뮬레이션의 정확성을 높이는 동시에 실제 시스템의 이해에 기여할 것으로 예상되어 진다. Neutral gas in a Hall-effect thruster in a small satellite is simulated using a molecular dynamics code. Investigated are neutral density, pressure, axial average velocity, and temperature for the variation of diffusive reflection ratio, initial gas temperature, and channel length. Expected through this research are improving of discharge simulation through the neutral simulation and understanding of real system.
송인철(In-Cheol Song),최원영(Won-Young Choi),이돈규(Don-Kyu Lee),최준영(Joon-Young Choi),윤현진(Hyun-Jin Yoon),이해준(Hae-Jun Lee),이호준(Ho-Jun Lee) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.10
기존의 3~4㎜ 간격을 가진 냉음극 형광램프(CCFL)나 외부전극형광램프(EEFL)는 휘도의 균일성과 응답속도가 열등하기 때문에 42인치보다 큰 크기를 가지는 LCD TV에 적합하지 않다. 그래서 대면적 BLU(backlight unit)에 적합한 평면형광램프(FFL)에 대한 관심이 높아지고 있다. 본 논문에서는 FFL의 발광 효율을 향상시키기 위하여, 가스 혼합비을 변화시키면서, 2차원 유체코드를 이용한 수치해석을 통하여 방전효율에 영향을 미치는 요소가 Hg임을 확인 하였다.
삼층박막 구조의 PHR 센서를 이용한 자기 박테리아 감지
유상엽(Sang Yeob Yoo),임병화(Byeong Hwa Lim),송인철(In Cheol Song),김철기(Cheol Gi Kim),오선종(Sun Jong Oh) 한국자기학회 2013 韓國磁氣學會誌 Vol.23 No.6
In this study, we have fabricated magnetoresistive sensors of 50 μm × 50 μm cross type by trilayer structure of antiferromagnetic/nonmagnetic/ferromagnetic. The magnetic signal and magnetic domain of this sensor is measured. The sensor hysteresis loop is not in symmetrical at 0 Oe. This is may be due to the exchange coupling between ferromagnetic layer and anti ferromagnetic layer. This exchange bias value is 20 Oe. The sensor signal is measured at between the applied magnetic field and current. The sensor signal is measured between the applied magnetic field and current at 20˚ and 90˚ angles. The sensitivity of sensor signals is 20 μV/Oe and 7 μV/Oe at 20˚ and 90˚ angles, respectively. In addition, this sensor is also applied for the detection of magnetic bacteria at 20˚ angle. From these results, we calculate the stray field of single bacteria is to be 5 × 10<SUP>?5</SUP>Oe.
Innovation Strategy For New Product Development Process by Indicative Planning & QM Tools
Ji-Hyun Ryu(유지현),Tae Wook Jung(정태욱),In-Cheol Song(송인철),Hyun-Seung Oh(오현승),Sae-Jae Lee(이세재),Jin-Hyung Cho(조진형) 한국산업경영시스템학회 2017 한국산업경영시스템학회지 Vol.40 No.4
The new businesses started by the companies usually results in being unsuccessful. The main reasons for that are either aiming targeting wrong customers, unsatisfaction of customers’ requesting quality standards, or taking wrong actions against the competitors in the market. Therefore, companies should aim the targets for the newly developing products based on the fulfilling values for the customers when they start the new businesses, and should take good cares for risk managements at the each step of the new business to prevent the failure in advance. In addition to that, the companies starting new businesses not only need to take the customers attributes (CA) into account, but they also should apply the new technologies as one system to initiate a new business to satisfy the basic wants of the customers. This article suggests the New Product Development Pursuing Model using the Indicative Planning methodology and the Quality Management tools. The New Product Development Pursuing Model would be completed by the following steps as below; 1. Drawing the CTQ (Critical To Quality) for setting up the new product development objectives by : i) using the VOC (Voice Of Customers) obtained by the QFD (Quality Function Deploypment) if the market is mature, ii) applying AHP (Analytic Hierarchy Process) to information in the QIS (Quality Information System) if the market is unmature to get enough need information of the customers. 2. Risk Management in NPD : The NPD pursuing model consisted of the IP (indicative planning) is suggested not by the process of top-down-way mandatory planning process, but by the tools used in the administrative science and economic fields, namely by governance. The companies could apply innovative methodology for new products development processes to fulfil the customers satisfaction in the fields, through the CA (Contingency Approach) of the NPD (New Product Development) process.
문훈기,송인철,김재원,이혜윤,Moon, Hoon-Ki,Song, In-Cheol,Kim, Jae-Won,Lee, Hye-Yoon 한국터널지하공간학회 2017 한국터널지하공간학회논문집 Vol.19 No.1
최근 지하공간의 효율적 활용을 위해 도로 및 수로 기능을 동시에 충족하는 다목적 터널의 개발에 대한 국민적 관심이 높은 상황이다. 하지만 반복적인 기능전환과 수압변화에 따른 다목적 터널의 거동 연구는 전무한 실정이다. 본 연구에서는 대심도 복층터널의 반복적인 기능 전환에 따른 취약 구간의 분석을 통해 다목적 터널의 운영 중 필요한 유지관리 항목과 운영 방향의 설정에 대한 기초검토를 수행하였다. 또한, 터널의 시공 및 운영 중 도로 및 수로의 기능전환 단계에 따른 터널의 취약 구간을 수치해석을 통하여 분석하였다. 다목적 터널의 유지관리는 기능에 따른 특성을 고려한 다양한 분석 및 복합적인 고려가 필요하며, 본 연구를 통해 다목적 터널의 유지관리 방안을 제시하였다. Recently, the development of multi-purpose tunnel that has functions of roads and waterways has been attention for efficient utilization of underground space. However, there is no study on the multi-functional tunnels behavior for the convert of iterative function and change of water pressure. In this study, the vulnerable section was analyzed due to repeated functional change. A basic review was implemented for the operation of the multi-purpose double-deck tunnel. Also, the vulnerable section for convert of iterative function of multi-functional tunnel has been analyzed by simulation. Management of multi-functional tunnel should considered in various analyzed and some problems. The criteria for management of multi-functional tunnels is proposed.
대심도 복층터널의 다목적 활용을 위한 입지선정 및 통수성능 평가
문훈기,길기오,송인철,이혜윤,Moon, Hoon-Ki,Kil, Ki- Oh,Song, In-Cheol,Lee, Hye-Yoon 한국터널지하공간학회 2016 한국터널지하공간학회논문집 Vol.18 No.3
최근 도시지역의 홍수방지 및 지정체 반복구간의 교통문제 해결을 위해 다목적 대심도 복층터널의 건설이 요구되고 있다. 다목적 복층터널은 주기능인 도로기능 이외에 다목적 기능을 부여해 지하공간의 효율적인 활용을 위해 도입이 절실하다. 본 연구에서는 도심지 치수능력 증진과 도로터널의 기능을 동시에 고려하기 위한 입지선정 조건과 복층터널의 단면 구역별 처리가능한 유량에 대한 기초검토를 수행하였다. 터널의 용도별 입지선정 기준 검토를 통해 복층터널의 다목적 활용을 위한 입지선정 기준 방안을 제시하고 있다. 또한 대심도 복층터널의 다목적 활용성 검토를 위해 계획단면에 대한 홍수시 처리 가능 유량을 검토하였다. 본 연구로부터 복층터널의 입지선정은 다양한 분석을 통한 복합적인 고려가 필요함을 알 수 있다. Recent, the construction of the multi-purpose double-deck tunnel is required to solve the flood protection and congested area at urban city. The multi-purpose double-deck tunnel is desperately needed for the introduction of efficient utilization of underground space in addition to the main feature of road capabilities. A basic review was performed for site selection to consider the control capability and features of road tunnel at the same time, and the processable flow in accordance with tunnels cross section of double deck tunnel. Site Selection Criteria for multi-purpose use of the double-deck tunnel has been proposed through the site selection criteria by use of the tunnels review. Also the estimation processable flow was performed to review the versatility of double-deck tunnel due to design of tunnel cross-section. Site Selection of double-deck tunnel from this study can be seen the need for a complex consideration through a variety of analyzes.
Visible ray trace 방법을 이용한 PDP cell에서 발생한 가시광선 분포 계산
황석원(Seok Won Hwang),송인철(In Cheol Song),임왕선(Wang Sun Lim),윤현진(Hyun-Jin Yoon),이해준(Hae June Lee) 대한전기학회 2007 대한전기학회 학술대회 논문집 Vol.2007 No.11
PDP cell에서 발생한 가시광선의 분포를 visible ray trace 방법을 이용하여 계산하였다. 본 논문에서는 ITO-less 구조를 시뮬레이션 하여 가시광선의 출구 효율, illuminance 분포, luminance 분포를 구하였다.
배효원(Hyo-Won Bae),심승보(Seung-Bo Shim),황석원(Seok-Won Hwang),송인철(In-Cheol Song),이해준(Hae June Lee),이호준(Ho-Jun Lee),박정후(Chung-Hoo Park) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
본 연구에서는 전자빔에 의해 생성되는 저온 플라즈마의 특성을 시뮬레이션을 통해 알아보았다. 전자빔 소스에서 전자를 생성하여 가속 전압을 인가하여 챔버로 보내고, 챔버 속의 Argon 중성 기체와 전자가 충돌하여 2차 방전을 일으킴으로써 저온 플라즈마가 생성된다. 이 때 중성기체의 압력과 가속전압의 변화에 따라서 플라즈마 밀도와 온도가 변하는데, 어떠한 특성을 가지는지 알아보기 위해 Particle-In-Cell(PIC) 시뮬레이션을 이용하였다. 챔버 내부에서 전자빔과 중성기체에 의한 변화를 관측했고, 이 때 전자빔 소스에서 Negative Acceleration Voltage는 10V∼40V, 챔버 내부의 Argon 중성 기체의 압력은 1mTorr∼20mTorr 조건하에서 시뮬레이션을 수행하였다. Elect-ron Energy Distribution function (EEDF)을 관찰한 결과, 가속전압이 높을수록 낮은 에너지를 가지는 전자의 수가 증가하여 전자 밀도는 증가하며, 가스 압력이 높을수록 EEDF의 기울기가 커지면서 전자온도는 감소함을 알 수 있었다.