http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Optimization of $Nd^{3+}$ ion co-doping in $CaAl_2O_4:\;Eu^{2+}$ blue phosphor
류호진,Bartwal, Kunwar Singh,Ryu, Ho-Jin 한국자원리싸이클링학회 2007 資源 리싸이클링 Vol.16 No.5
[ $Eu^{2+},\;Nd^{3+}$ ]로 도핑된 $CaAl_2O_4$ 청색 형광체를 고상반응법으로 제조하였다. 1 mol% $Eu^{2+}$로 doping된 형광체에 다양한 조성의 $Nd^{3+}$를 co-doping함에 따라 고휘도, 장잔광 특성을 보였다. 제조한 형광체에 대하여 XRD, SEM, TEM, 빛발광 특성을 조사하였다. $CaAl_2O_4:Eu^{2+}:Nd^{3+}$의 넓은 밴드의 UV로 여기된 빛발광 특성이 $Eu^{2+}$의 $4f^65d^1$에서 $4f^7$ 상태로 천이에 의해 기인된 청색영역(${\lambda}_{max}=440\;nm$)에서 관찰되었다. $Nd^{3+}$로 co-doping한 형광체는 여기광을 차단하였을 때 장잔광 발광 특성을 나타내었다. Blue phosphor calcium aluminate, $CaAl_2O_4:Eu^{2+}$ co-doped with $Nd^{3+}$ was prepared by solid state synthesis method. Phosphor materials with 1 mol% $Eu^{2+}$ and varying compositions of $Nd^{3+}$ show high brightness and long persistent luminescence. The synthesized phosphor materials were investigated by powder x-ray diffraction (XRD), SEM, TEM, photoluminescence excitation and emission studies. Broad band UV excited luminescence of the $CaAl_2O_4:Eu^{2+}:Nd^{3+}$ was observed in the blue region (${\lambda}_{max}=440\;nm$) due to transitions from the $4f^65d^1$ to the $4f^7$ configuration of the $Eu^{2+}$ ion. $Nd^{3+}$ ion doping in the phosphor results in long afterglow phosphorescence when the excitation light is cut off.
가스분무법에 의한 Fe계 비정질 분말의 제조와 볼밀링공정에 의한 연질 Cu 분말과의 복합화 및 SPS 거동 (I) - I. 가스분무 및 복합화 -
류호진,임재현,김지순,김진천,김휘준,Ryu, Ho-Jin,Lim, Jae-Hyun,Kim, Ji-Soon,Kim, Jin-Chun,Kim, H.J. 한국분말야금학회 2009 한국분말재료학회지 (KPMI) Vol.16 No.5
Fe based (Fe$_{68.2}$C$_{5.9}$Si$_{3.5}$B$_{6.7}$P$_{9.6}$Cr$_{2.1}$Mo$_{2.0}$Al$_{2.0}$) amorphous powder, which is a composition of iron blast cast slag, were produced by a gas atomization process, and sequently mixed with ductile Cu powder by a mechanical ball milling process. The experiment results show that the as-prepared Fe amorphous powders less than 90 $\mu$m in size has a fully amorphous phase and its weight fraction was about 73.7%. The as-atomized amorphous Fe powders had a complete spherical shape with very clean surface. Differential scanning calorimetric results of the as-atomized Fe powders less than 90 $\mu$m showed that the glass transition, T$_g$, onset crystallization, T$_x$, and super-cooled liquid range $\Delta$T=T$_x$-T$_g$ were 512, 548 and 36$^{\circ}C$, respectively. Fe amorphous powders were mixed and deformed well with 10 wt.% Cu by using AGO-2 high energy ball mill under 500 rpm.
모의 사용후 핵연료를 이용한 질화물 핵연료 소결체 제조
류호진,이재원,이영우,이정원,박근일,Ryu, Ho-Jin,Lee, Jae-Won,Lee, Young-Woo,Lee, Jung-Won,Park, Geun-Il 한국분말야금학회 2008 한국분말재료학회지 (KPMI) Vol.15 No.2
In order to investigate a nitriding process of spent oxide fuel and the subsequent change in thermal properties after nitriding, simulated spent fuel powder was converted into a nitride pellet with simulated fission product elements through a carbothermic reduction process. Nitriding rate of simulated spent fuel was decreased with increasing of the amount of fission products. Contents of Ba and Sr in simulated spent fuel were decreased after the carbothermic reduction process. The thermal conductivity of the nitride pellet was decreased by an addition of fission product element but was higher than that of the oxide fuel containing fission product elements.
액중 전기선 폭발법에 의한 Ni-free Fe계 나노 합금분말의 제조: 2. 용매의 영향 및 제조 방법에 따른 분말입자의 비교
류호진,이용희,손광욱,공영민,김진천,김병기,윤중열,Ryu, Ho-Jin,Lee, Yong-Heui,Son, Kwang-Ug,Kong, Young-Min,Kim, Jin-Chun,Kim, Byoung-Kee,Yun, Jung-Yeul 한국분말야금학회 2011 한국분말재료학회지 (KPMI) Vol.18 No.2
This study investigated the effect of solvent on the fabrication of Ni-free Fe-based alloy nano powders by employing the PWE (pulsed wire evaporation) in liquid and compared the alloy particles fabricated by three different methods (PWE in liquid, PWE in Ar, plasma arc discharge), for high temperature oxidation-resistant metallic porous body for high temperature soot filter system. Three different solvents (ethanol, acetone, distilled water) of liquid were adapted in PWE in liquid process, while X-ray diffraction (XRD), field emission scanning microscope (FE-SEM), and transmission electron microscope (TEM) were used to investigate the characteristics of the Fe-Cr-Al nano powders. The alloy powder synthesized by PWE in ethanol has good particle size and no surface oxidation compared to that of distilled water. Since the Fe-based alloy powders, which were fabricated by PWE in Ar and PAD process, showed surface oxidation by TEM analysis, the PWE in ethanol is the best way to fabricate Fe-based alloy nano powder.
류호진,Ryu, Ho-Jin 한국재료학회 1997 한국재료학회지 Vol.7 No.2
본 논문은 분쇄한 dickite의 메카노케미칼 효과에 관해서 연구한 것이다. 유성밀을 사용하여 분쇄한 dickite의 메카노케미칼 효과를 알아보기 위하여, 분쇄시간을 달리하여 얻어진 dickite에 대하여 시차열분속과 X선 동경분포함수를 이용하여 정밀구조분석을 하였다. 분쇄한 dickite에 대하여 동경분포함수 해석 결과, $SiO_{4}$ 사면체는 분쇄한 dickite내에서 국소단위구조로 그대로 잔류하고 있었다. 한편 AI-O의 배위수 및 원자간 거리는 분쇄시간의 증가에 따라 점점 감소하였고, 이에 대한 정량화가 가능했다. 이는 시차열분석 결과의 AI주위의 환경변화와 일치하였다. 따라서, 분쇄함에 따른 dickite의 메카노케미칼 현상은 AI주위의 환경변화에 기인된 것으로 볼 수 있다. In this paper, I meritioned ,I study on thc rnechanochernic;~l effec ts of grountl iljckite To investigate the mechanochemical effects of ground tlickite 1,y planet,~r\- mill. a structul-ill i~nalvsis of dickite prepared with different grinding time has been made 11y X-ray diffraction and ilifierenti,~l tl~i.~-ni;~i analysis. 'l'he $SiO_{4}$ hecira was unchanged bl- milling and remained ;is the local ordering unit s t t - ~ c ~ u ~ - c ~ s in the ground dickitc samples I ) v analyzing the radial distribution function. On the other hand, with an increi~se of the grinding time a decrease of coordination number and atomic distance bet\vccn aluminum and oxygen hi1c.r l~een octurreil, and Li~~antitativcl\. coniirrned them This result corresponded to the local c,hange around aliimi~iuni I>V tliftercntii~l t1ii:rm;il ani~lysis. Therefore, the mechanochemical phenomina of ground tiickite werc3 h e to the local c~l~mge around aluminum \IT. the prolonged grinding.
류호진,Ryu, Ho-Jin 한국방사성폐기물학회 2010 방사성폐기물학회지 Vol.8 No.4
원자력의 중흥기를 맞이하여 민감한 핵연료주기 기술의 무분별한 확장을 억제하고자 다양한 핵연료주기 다자 방안이 제시되고 있다. 현재 원자력 공급국 위주의 핵연료주기 다자화가 추진되고 있는 실정에서 후행 핵연료주기 기술의 다자화 추진 추이를 파악하고자 사용후핵연료 공동 관리 시설에 대한 분석 결과를 검토하였다. 또한 후행 핵연료주기 연구개발 시설의 다자화를 제안하고 기대효과와 문제점을 검토한 후 이를 실현하기 위한 추진방안을 도출하였다.
회전 볼밀내에 있어서 볼의 운동 및 운동에저지의 시뮬레이션
류호진,Ryu, Ho-Jin 한국재료학회 1997 한국재료학회지 Vol.7 No.4
회전 불밀에 있어서 볼의 운동을 비선형 spring과 비선형 deshpot로 구성된 Kelvin모델을 사용한 DEM(Distinct Element Method;개별요소법)에 의하여 2차원으로 해석하였다. 모델에 있어서 점성계수는 볼과 밀벽사이의 반발실험 데이타로 부터 결정하였다. 각볼의 동적인 운동은 비선형 점탄성과 Newton의 운동법칙를 기초로하여 모사되었다. 밀이 회전하는 동안 볼의 궤적과 동적인 운동은 실제 실험에 의한 밀내에서의 볼의 운동고 잘 일치하였다. 본 연구에서 제안된 모델 시뮬레이션은 회전 볼밀내의 실제의 3차원인 볼의 운동에 대한 해석에 중요한 단서가 될 수 있었다. 볼의 운동고 운동에너지는 회전 볼밀의 속도와 볼의 충진율에 의해 크게 영향을 받았다.
액중 전기선 폭발법에 의한 Ni-free Fe계 나노 합금분말의 제조: 1. 합금 wire의 직경 및 인가 전압의 영향
류호진,이용희,손광욱,공영민,김진천,김병기,윤중열,Ryu, Ho-Jin,Lee, Yong-Heui,Son, Kwang-Ug,Kong, Young-Min,Kim, Jin-Chun,Kim, Byoung-Kee,Yun, Jung-Yeul 한국분말야금학회 2011 한국분말재료학회지 (KPMI) Vol.18 No.2
This study investigated the effect of wire diameter and applied voltage on the fabrication of Ni-free Fe-based alloy nano powders by employing the PWE (pulsed wire evaporation) in liquid, for high temperature oxidation-resistant metallic porous body for high temperature particulate matter (or soot) filter system. Three different diameter (0.1, 0.2, and 0.3 mm) of alloy wire and various applied voltages from 0.5 to 3.0 kV were main variables in PWE process, while X-ray diffraction (XRD), field emission scanning microscope (FE-SEM), and transmission electron microscope (TEM) were used to investigate the characteristics of the Fe-Cr-Al nano powders. It was controlled the number of explosion events, since evaporated and condensed nano-particles were coalesced to micron-sized secondary particles, when exceeded to the specific number of explosion events, which were not suitable for metallic porous body preparation. As the diameter of alloy wire increased, the voltage for electrical explosion increased and the size of primary particle decreased.