대장균 성장 억제에 대한 TiO₂/HAP/Ge의 항균능 평가

장순웅,김한상,이일국,이시진,Chang, SoonWoong,Kim, HanSang,Lee, IlKook,Lee, SiJin 한국방재학회 2014 한국방재학회논문집 Vol.14 No.1

본 연구에서는 $TiO_2$/HAP/Ge 복합물을 항균효과를 위한 도포제로 사용하였다. $TiO_2$는 라디칼 종의 생성을 통해 항균능을 갖는 물질로 잘 알려진 광촉매이다. 하지만 $TiO_2$는 적용에 있어 광원 및 조사강도에 대한 제한성이 있으며, 이를 해결하기 위해 HAP와 Ge가 $TiO_2$의 활성을 향상시키기 위해 사용되었고, 항균능의 비교는 E. coli의 성장저해율을 기준으로 수행되었다. 그 결과, $TiO_2$/HAP/Ge가 단일 $TiO_2$와 $TiO_2$가 추가된 복합물에 비해 가장 높은 E. coli. 저감율을 갖는 것으로 관찰되었다. Kinetic 결과에서도 $TiO_2$/HAP/Ge의 항균능이 E. coli의 성장저해에 대해 보다 효과적으로 나타났다. 이러한 결과는 HAP와 Ge와의 상승효과에 의해 광촉매활성이 증가하는 것에 기인한다. In this study, $TiO_2$/HAP/Ge composite was used to coating agent for antimicrobial effect. Titanium dioxide ($TiO_2$) has the limitation for application that depend on light source and irradiation intensity. To solve this reason, hydroxyapatite (HAP) and germanium (Ge) were used to enhance the activity of $TiO_2$. and, the comparison of the antimicrobacterial function was conducted by the inhibition rate of E. coli growth. For the result, it was observed that the $TiO_2$/HAP/Ge behaves the highest E. coli. reduction efficiency for single $TiO_2$ and other $TiO_2$ added composite. and, the kinetic results were also showed that the antibacterial potential of $TiO_2$/HAP/Ge composite was more effective for growth inhibition of E. coli. These result was due to the enhanced photocatalytic activity by sygergistic effect with HAP and Ge.

디젤오염 토양 및 지하수 복원을 위한 공기주입정화법 실험실 연구 : 공기주입량과 공기주입방식의 영향

장순웅,이시진,조수형,윤준기,Chang, Soon-Woong,Lee, Si-Jin,Cho, Su-Hyung,Yoon, Jun-Ki 한국지하수토양환경학회 2006 지하수토양환경 Vol.11 No.4

본 연구에서는 실험실 규모의 2D air/bio-sparging 장치를 이용하여 공기주입량과 공기주입방식이 디젤오염 토양/지하수의 복원에 미치는 영향을 평가하고 최적 조건을 도출하였다. 최적의 공기주입량과 공기주입방식은 1,000 ml/min의 공기주입과 15 min 간격의 간헐적인 공기주입 패턴이 효율적으로 관찰되었고, 실험기간동안 TPH와 DO 감소, $CO_2$ 생성은 오염원인 디젤이 효과적으로 생분해에 의해 제거가 이루어지고 있음 보여주었다. 즉, 최소한의 공기주입으로도 포화층에서의 디젤 분해를 효과적으로 증진시킬 수 있었으며, 간헐적인 공기주입방식은 대수층내에서의 공기 전달을 증진시킬 수 있었다. 또한 Air/bio-sparging공법의 대부분의 운전비가 blower와 off-gas 처리 시스템에 사용되는 전력비라는 것을 감안 할 때, 최적의 공기주입량과 간헐적인 공기주입방식은 운전비 절감의 효과를 가져다 줄 것으로 판단된다. Laboratory-scale two-dimensional aquifer physical model studies were conducted to assess the effect of air injection rate and air injection pattern on the removal of disel contaminated soil and groundwater by air/bio-sparging. The experimental results were represented that the optimal conditions in this experiment were as air injection rate of 1,000 ml/min and pulsed air injection pattern(15 min on/off). The results of the TPH reduction, DO consumption and $CO_2$ production indicate the effective biodegradation evidence of diesel. Based on our results, The minimal $O_2$ supply and pulsed air injection pattern could effectively enhance the diesel removal and the pulsing air injection had effect on oxygenation in this system. Thus, the cost of operating air/bio-sparging system will be reduced if optimal air injection rate and pulsed air injection pattern are applied to remediate contaminants.

UV 공정을 이용한 N-Nitrosodimethylamine (NDMA) 광분해 및 부산물 생성에 관한 연구: 박스-벤켄법 실험계획법을 이용한 통계학적 분해특성평가 및 반응모델 수립

장순웅,이시진,조일형,Chang, Soon-Woong,Lee, Si-Jin,Cho, Il-Hyoung 대한환경공학회 2010 대한환경공학회지 Vol.32 No.1

본 연구는 광분해 산화공정으로 난분해성 물질인 N-Nitrosodimethylamine (NDMA)인 제거 및 부산물 생성 특성을 파악하기 위한 3개의 독립변수 (자외선 강도($X_1:\;1.5{\sim}4.5\;mW/cm^2$, 초기 NDMA 농도($X_2:\;100{\sim}300\;uM$), pH(X3:3~9))와 4개의 종속변수(NDMA 제거율($Y_1$), dimethylamine (DMA) 생성농도($Y_2$), dimethylformamide (DMF) 생성농도($Y_3$) 및 $NO_2$-N 생성농도($Y_4$))로 구성된 박스-벤켄 설계를 이용한 실험계획을 적용시켜 예측 모델과 광분해 산화 최적조건을 수립하였다. 실험결과 2시간 광분해 후 NDMA는 거의 완전히 제거되었으며 DMA, DMF와 $NO_2$-N은 NDMA 광분해와 동시에 부산물로 생성되었다. 광분해 최적의 조건을 얻기 위해 정준분석을 수행하여 최적 점 (반응값, 독립변수 조건)과 예측반응모델을 수립한 결과, 다음과 같은 결과를 얻었다 ($Y_1=117+21X_1-0.3X_2-17.2X_3+{2.43X_1}^2+{0.001X_2}^2+{3.2X_3}^2-0.08X_1X_2-1.6X_1X_3-0.05X_2X_3$ ($R^2$ = 96%, Adjusted $R^2$ = 88%)와 99.3% ($X_1:\;4.5\;mW/cm^2$, $X_2:\;190\;uM$, $X_3:\;3.2$), $Y_2=-101+18.5X_1+0.4X_2+21X_3-{3.3X_1}^2-{0.01X_2}^2-{1.5X_3}^2-0.01X_1X_2-0.07X_1X_3-0.01X_2X_3$ ($R^2$= 99.4%, 수정 $R^2$ = 95.7%)와 35.2 uM ($X_1:\;3\;mW/cm^2$, $X_2:\;220\;uM$, $X_3:\;6.3$), $Y_3=-6.2+0.2X_1+0.02X_2+2X_3-{0.26X_1}^2-{0.01X_2}^2-{0.2X_3}^2-0.004X_1X_2+0.1X_1X_3-0.02X_2X_3$ ($R^2$= 98%, 수정 $R^2$ = 94.4%)와 3.7 uM ($X_1:\;4.5\;mW/cm^2$, $X_2:\;290\;uM$, $X_3:\;6.2$), $Y_4=-25+12.2X_1+0.15X_2+7.8X_3+{1.1X_1}^2+{0.001X_2}^2-{0.34X_3}^2+0.01X_1X_2+0.08X_1X_3-3.4X_2X_3$ ($R^2$= 98.5%, 수정 $R^2$ = 95.7%)와 74.5 uM ($X_1:\;4.5\;mW/cm^2$, $X_2:\;220\;uM$, $X_3:\;3.1$). 반응표면분석법 중 하나인 박스-벤켄법은 UV 광분해에 의한 NDMA 분해 및 부산물 생성에 대한 통계학적 및 수학적인 결과 및 최적의 운전조건을 제시하였다. 예측모델의 검정을 통하여 박스-벤켄법은 매우 높은 신뢰성을 보였다. We investigated and estimated at the characteristics of decomposition and by-products of N-Nitrosodimethylamine (NDMA) using a design of experiment (DOE) based on the Box-Behken design in an UV process, and also the main factors (variables) with UV intensity($X_2$) (range: $1.5{\sim}4.5\;mW/cm^2$), NDMA concentration ($X_2$) (range: 100~300 uM) and pH ($X_2$) (rang: 3~9) which consisted of 3 levels in each factor and 4 responses ($Y_1$ (% of NDMA removal), $Y_2$ (dimethylamine (DMA) reformation (uM)), $Y_3$ (dimethylformamide (DMF) reformation (uM), $Y_4$ ($NO_2$-N reformation (uM)) were set up to estimate the prediction model and the optimization conditions. The results of prediction model and optimization point using the canonical analysis in order to obtain the optimal operation conditions were $Y_1$ [% of NDMA removal] = $117+21X_1-0.3X_2-17.2X_3+{2.43X_1}^2+{0.001X_2}^2+{3.2X_3}^2-0.08X_1X_2-1.6X_1X_3-0.05X_2X_3$ ($R^2$= 96%, Adjusted $R^2$ = 88%) and 99.3% ($X_1:\;4.5\;mW/cm^2$, $X_2:\;190\;uM$, $X_3:\;3.2$), $Y_2$ [DMA conc] = $-101+18.5X_1+0.4X_2+21X_3-{3.3X_1}^2-{0.01X_2}^2-{1.5X_3}^2-0.01X_1X_2+0.07X_1X_3-0.01X_2X_3$ ($R^2$= 99.4%, 수정 $R^2$ = 95.7%) and 35.2 uM ($X_1$: 3 $mW/cm^2$, $X_2$: 220 uM, $X_3$: 6.3), $Y_3$ [DMF conc] = $-6.2+0.2X_1+0.02X_2+2X_3-0.26X_1^2-0.01X_2^2-0.2X_3^2-0.004X_1X_2+0.1X_1X_3-0.02X_2X_3$ ($R^2$= 98%, Adjusted $R^2$ = 94.4%) and 3.7 uM ($X_1:\;4.5\;$mW/cm^2$, $X_2:\;290\;uM$, $X_3:\;6.2$) and $Y_4$ [$NO_2$-N conc] = $-25+12.2X_1+0.15X_2+7.8X_3+{1.1X_1}^2+{0.001X_2}^2-{0.34X_3}^2+0.01X_1X_2+0.08X_1X_3-3.4X_2X_3$ ($R^2$= 98.5%, Adjusted $R^2$ = 95.7%) and 74.5 uM ($X_1:\;4.5\;mW/cm^2$, $X_2:\;220\;uM$, $X_3:\;3.1$). This study has demonstrated that the response surface methodology and the Box-Behnken statistical experiment design can provide statistically reliable results for decomposition and by-products of NDMA by the UV photolysis and also for determination of optimum conditions. Predictions obtained from the response functions were in good agreement with the experimental results indicating the reliability of the methodology used.

질산화 미생물에 의한 나프탈렌과 2-메틸 나프탈렌 분해에 관한 연구

장순웅(Soon Woong Chang),이시진(Si Jin Lee) 大韓環境工學會 1999 대한환경공학회지 Vol.21 No.9

DBM(DiButyl Maleate)을 포함한 잠재적 디젤첨가제 생분해특성

장순웅(Chang Soonwoong) 한국지반환경공학회 2010 한국지반환경공학회논문집 Vol.11 No.8

본 연구에서는 디젤오염토양에서 활성화된 토착미생물을 이용한 DBM을 포한한 디젤첨가제와 유사한 물리화학적 특성을 갖는 가솔린첨가제를 대상으로 호기성 조건에서의 생분해성 평가를 수행하였다. Toluene, Ethanol 등이 가장 높은 활성도를 보였고, 일차분해상수는 0.11∼0.3 day?¹의 범위를 보여주었다. 반면에, 가솔린첨가제인 MTBE는 낮은 분해 특성을 보여주어 토양미생물에 제한적인 분해기질로 나타났다. 이와 더불어, DBM과 TGME를 대상으로 초기농도의 증가에 따른 분해 특성을 조사한 결과 초기농도 증가에 따라 분해속도는 감소하는 것으로 관찰되었다. 또한 DBM과 TGME의 생분해도를 평가하기 위한 방안으로 디젤첨가제의 저감과 동시에 CO₂ 생성 모니터링과 조류에 의한 독성 변화를 조사한 결과, 디젤첨가제의 농도 감소와 더불어 CO₂ 생성량의 증가는 DBM과 TGME의 무기화를 간접적으로 보여주고 있으나, DBM과 TGME이 완전히 분해되었음에도 불구하고 조류에 의한 잔류독성이 남아있는 결과는 완전 무기화가 일어나지 않고 중간 부산물이 생성된 것으로 추정된다. 그럼에도 불구하고, DBM과 TGME를 포한한 디젤첨가제에 대한 생물학적 분해 연구는 국내에서 처음 보여주는 결과로 국내 유류오염지역의 생물학적 자연저감의 원리를 적용한 현장적용 타당성을 좀 더 높여주는 결과라고 판단된다. In this study, we have evaluated biodegradability of diesel-oxygenates including DBM and gasoline-oxygenates having similar physio-chemical properties using indigenous aerobic microorganisms from a diesel-contaminated soil. Toluene and Ethanol have shown higher biological activity and the first-order degradation rate constants ranged around 0.11∼0.3 day?¹. However, MTBE, gasoline-oxygenate has shown as a limited substrate. Moreover, As increased initial concentrations of DBM and TGME, degradation rates of those were decreased relatively. As a strategy to evaluate biodegradability of DBM and TGME, reduction of dieseloxygenates, CO₂ production and toxicity by algae were monitored. This results indicated possible mineralization of diesel-oxygenates, But we could predict that residual byproduct produced even though complete consumption of diesel-oxygenates were observed if algal toxicity variation considered. In conclusion, it is the first report that diesel-oxygenates including DBM could be biodegraded effectively by indigenous soil microorganisms and this result increased the possibility of bioremediation technology to apply into oil-contaminated sites.

토양미생물에 의한 Benzene , Toluene , Ethylbenzene , 그리고 Xylenes (BTEX)의 분해시 농도와 온도의 영향

장순웅(Soon Woong Chang),라현주(Hyun Joo La),이시진(Si Jin Lee) 大韓環境工學會 2001 대한환경공학회지 Vol.23 No.2

고체상미량분석법 (SPME)에 의한 NDMA(N-Nitrodimethylamine) 최적 분석법 개발

장순웅 ( Soon Woong Chang ) 한국환경분석학회 2007 환경분석과 독성보건 Vol.10 No.1

전자빔 공정을 적용한 Triclosan의 제거특성 및 독성평가

장태범(Chang Taebum),장순웅(Chang Soonwoong),이시진(Lee Sijin),조일형(Cho Ilhyoung) 한국지반환경공학회 2012 한국지반환경공학회논문집 Vol.13 No.3

본 연구의 목표는 전자빔 공정을 적용하여 Triclosan의 제거효율 및 독성평가를 하는 것이다. 이 실험에서는 전자빔 선량과 Triclosan의 초기 농도에 따른 저감 효율 및 스캐벤저 가스에 따른 무기화의 정도를 알아보았다. 또한 녹조류 중 하나인 Pseudokirohneriella Subcapitata를 이용하여 생물독성과 위해성 평가를 통한 독성저감기술을 시험하였다. 그 결과 Triclosan은 전자빔 조사량이 증가할수록 분해 효율이 향상되었고, 라디칼 스캐벤저 가스에 의한 TOC 제거는 N₂O나 O₂를 용해시켰을 때 효율이 증가된 것으로 나타났다. 4일(96hrs) 후 독성평가 결과 전자빔 조사 강도의 증가에 따라 독성 영향이 저감되는 것을 알 수 있었다. The abjective of this study was to study the degradation behavior and acute toxicity assessment of Triclosan and acute toxicity under E-beam irradiation. The experiments were conducted to investigate the efficts of the degradation efficiency in the initial concentration of Triclosan and the irradiation capacity of E-beam and the degree of mineralization based on a change of scavenger gas. The biological toxicity test by using on green algae, Pseudokirchneriella Subcapitata was conducted to lead the reducing toxicity. Degradation efficiency of Triclosan was improved when E-beam irradiation intensity was higher. Additionally, the % of TOC removal in each Radical scavenger gas was increased as the follows orders: N₂O>O₂>N₂, The toxicity test showed that the toxicity effect after 4 days(96hrs) was decreased by increase of E-beam irradiation intensity.

실규모의 고도처리공정에서 NADH변화 유형과 이를 활용한 공정제어

김한래,조종복,조일형(cho ih hyoung),이진우,장순웅(CHANG SOON WOONG),이시진(Si-Jin Lee) 한국환경보건학회 2008 한국환경보건학회지 Vol.34 No.6

In this study, we investigated the possibility of auto control and the proper operating factors in the BNR(Biological Nutrient Removal) process using an NADH(Reduced Nicotinamide Adenine Dinucleotide) fluorometer, which characterized the emitted fluorescence when activated by flashes of UV light at 460 nm. In terms of finding adequate operating parameters, results indicted that nitrification efficiency decreased in the controlled DO while denitrification efficiency decreased in the controlled pH. The above results indicated that controlled operating condition after combination with NADH, DO and pH was resonable. Result obtained from the correlation between NADH and pH showed that variation trend of influent loading was similar to those of NADH and pH, and also the variation cycle was repeated on a daily basis. Consequently, this result showed the increase of BOD loading caused the nitrification efficiency to decrease because air-flow, required for nitrification, was reduced, and so the NADH value was increased. From these results, it is possible to use NADH flourimetry to assess the variation of organic load and nitrification efficiency in the case of small change in influent pH such as in sewage and also to handle and operate the load variation in the auto control system using the NADH fluorometer. In this study, we investigated the possibility of auto control and the proper operating factors in the BNR(Biological Nutrient Removal) process using an NADH(Reduced Nicotinamide Adenine Dinucleotide) fluorometer, which characterized the emitted fluorescence when activated by flashes of UV light at 460 nm. In terms of finding adequate operating parameters, results indicted that nitrification efficiency decreased in the controlled DO while denitrification efficiency decreased in the controlled pH. The above results indicated that controlled operating condition after combination with NADH, DO and pH was resonable. Result obtained from the correlation between NADH and pH showed that variation trend of influent loading was similar to those of NADH and pH, and also the variation cycle was repeated on a daily basis. Consequently, this result showed the increase of BOD loading caused the nitrification efficiency to decrease because air-flow, required for nitrification, was reduced, and so the NADH value was increased. From these results, it is possible to use NADH flourimetry to assess the variation of organic load and nitrification efficiency in the case of small change in influent pH such as in sewage and also to handle and operate the load variation in the auto control system using the NADH fluorometer.

연구논문 : 활성슬러지 반응탱크의 풍량제어지표인 NADH에 관한 연구

정우진 ( Woo Jin Chung ),홍성민 ( Sung Min Hong ),김한래 ( Han Lae Kim ),장순웅 ( Soon Woong Chang ) 한국환경과학회 2016 한국환경과학회지 Vol.25 No.3

Domestic sewerage treatment plant is operated by activated sludge method and its modified method by using microorganism. In most cases, a method of using microorganism is directly controlled by the operator based on individual judgment through factors of DO, pH and ORP. In addition, under aerobic condition in bioreactor, energy consumption including excessive air injection is learned to be somewhat plenty. In order to solve this problem, in most of the process, improvement of internal recycling and activated environmental factor of microorganism were researched extensively. However, as factors are changed depending on various conditions, it is not sufficient as an indicator of judgment. As such, a research on operation of bioreactor that measures metabolic change in short time by directly measuring activated condition of microorganism using NADH fluorometer is required in reality.It is considered that the method like this could supplement problem of energy consumption being occurred in the existing treatment method and operational optimization of bioreactor would be enabled by controlling optimal air volume. Therefore, in this study, in order to obtain optimal operational indicator of bioreactor, proper air volume control test was performed and through batch test and site evaluation, possibility of NADH sensor being utilized as operational control indicator of bioreactor is intended to be analyzed. In order to compare with measured value, DO, ORP that are operational control indicator of existing bioreactor were used. As MLSS concentration was increased through batch test, NADH value was increased and site evaluation also showed similar tendency to batch test. Resultantly, it could be confirmed that changing level of NADH fluorometer was a sensor that could measure bioreactor condition effectively and optimized scale of bioreactor is considered to be utilized.