http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
소각장(燒却場)에서 발생되는 바닥재의 콘크리트용 잔골재(骨材)로서의 재활용(再活用)
임남웅,Lim, Nam-Woong 한국자원리싸이클링학회 2007 資源 리싸이클링 Vol.16 No.2
생활폐기물 소각장에서 발생되는 바닥재를 콘크리트 잔골재로 재활용하기 위해서, 기준모르타르에 모래 10%를 바닥재로 대체 하고 시멘트 10%를 포졸란성 규조토로 대체한 후, KS L 5105와 TCLP에 따라 시험하였다. 결과에 의하면, 바닥재의 유해중금속들은 TCLP 허용치 범위에 있었다. 포졸란성 규조토와 바닥재를 혼합한 모르타르 압축강도는 기준모르타르보다 높았으며 동시에 모든 유해중금속들은 TCLP 기준치 범위에 들어 있었다. 따라서 포졸란성 규조토를 안정재로 사용하게 되면 바닥재를 콘크리트 잔골재로 재활용할 수 있다. This paper described recycling of the bottom ash, sourced from the local incinerators as a fine sand for concrete. 10% bottom ash was substituted for the ordinary beach sand in the mortar(on a weigh basis), in conjunction with the pozzolznic diatomite. The specimens were tested according to KS L 5105 and analysed by TCLP(Toxic Chemical Leaching Procedure). The results showed that the hazardous heavy metals in the bottom ash are within the maximum permissible limit of TCLP. The compressive strength of the mortar with 10% bottom ash was highly improved, compared to the control mortar when the pozzolanic diatomite was used. It revealed that the hazardous heavy metals of the mortar with 10% bottom ash were leached within the maximum permissible limit of TCLP. It was concluded that the bottom ash can be reused as a fine sand for concrete when the pozzolanic diatomite was used as a stabilizer.
피혁 폐기물로부터 collagen 추출과 크롬이온 분리에 관한 연구
임봉주(Bong-Ju Lim),임남웅(Nam-Uoong Lim),임한진(Han-Jin Lim) 유기성자원학회 1998 유기물자원화 Vol.6 No.1
본 연구는 피혁 폐기물로부터 크롬 이온을 분리한 상태로 Collagen을 추출할 수 있는 최적 조건에 관한 것이다. Col1agen 추출에 있어 온도, pH, 그리고 알칼리 용액 농도의 영향을 설험했다. 실험결과 점도측정에 의해 초기 변성온도는 250C, 완전 변성온도는 31. 50 C 였다. Collagen 추출의 최적조건은 가용화 온도 150C-200C, pH 1. 5, 알칼리 용액 3%였다. pH 1. 5에서 크룸 이온이 거의 분리되었다. 탄년 폐기물로부터 크롬 이온의 분리효율은 99.5% 이상이였다. 피혁 폐기물로부터 조단백질의 추출율은 89.% 이었다. 추출된 조단백질내에 hydroxyprolne과 collagen의 함량은 각각 8.53%, 63.62%였다. The objective of this study is to investigate the optimum conditions of extracting collagen without chrome ion from the leather waste. The effect of temperature, pH, and the concentration of alkaline solution on the collagen extraction has been studied. The result indicated that the incipient denatured temperature of collagen measured by viscosity was 250C and the complete denatured temperature was 31. 50C. The optimum solubilization condition for temperature was between 150C and 20oC, pH was 1.5, the concentration of alkaline solution was 3% of sodium hydroxide. The almost complete chrome ion separation was possible around the pH of 1. 5. The separation efficiency of chrome ion from tannery waste was more than 99.5%. Extraction efficiency of crude protein from leather waste was about 89.5%. The hydroxyproline and col1agen content in the extracted crude protein were 8.53% and 63.62%, respectively.
재생(再生)잔골재(骨材)를 프리캐스트 콘크리트용(用) 골재(骨材)로 활용(活用)하기 위한 실험적(實驗的) 연구(硏究)
문대중,문한영,김양배,임남웅,Moon, Dae-Joong,Moon, Han-Young,Kim, Yang-Bae,Lim, Nam-Woong 한국자원리싸이클링학회 2006 資源 리싸이클링 Vol.15 No.2
폐콘크리트 파쇄시 발생하는 재생잔골재의 품질을 검토하였으며, 재생잔골재를 활용한 모르타르의 압축강도, 휨강도 및 흡수율을 검토하였다. 또한, 프리캐스트 콘크리트 제품용 골재로서의 적용성에 대하여 평가하였다. 재생잔골재의 밀도 및 흡수율은 각각 $2.31\;g/cm^3$ 및 8.07%로 KS F 2573의 2종에 해당되는 품질이었다. 혼합시멘트 MRS1, MRS2 및 MRS3 사용 모르타르의 재령 28일 압축강도는 물-시멘트비 35%, 양생온도 $40^{\circ}C$의 조건에서 각각 15.8, 27.4 및 48.7MPa로 최대값을 발현하였다. 모르타르의 최대휨강도는 혼합시멘트 MRS1 및 MRS2 사용시 물-시멘트비 35.0%, 양생온도 $40^{\circ}C$, 혼합시멘트 MRS3사용시 물-시멘트비 37.5%, 양생온도 $40^{\circ}C$의 조건에서 발현하였다. 혼합시멘트 MRS1, MRS2 및 MRS3를 사용한 모르타르의 흡수율의 범위는 각각 $8.3{\sim}7.3%,\;6.5{\sim}8.5%$ 및 $3.5{\sim}6%$의 범위로 나타났다. 그러므로 혼합시멘트와 재생잔골재의 비율을 적절히 조절함으로써 MRS1는 저강도용, MRS2는 보통강도용, MRS3는 고강도용으로 다양한 프리캐스트 콘크리트 제품에 적용될 수 있을 것으로 기대된다. The duality of recycled fine aggregate (RS) which was produced at the waste concrete crushing was investigated. The compressive strength, flexural strength and absorption of mortar utilized with RS were examined. It was evaluated on the application of RS as precast concrete aggregate. The density and absorption of RS were $2.31g/cm^3$ and 8.07% respectively, the quality of RS was satisfied with the criterion of KS F 2573 type 2. The maximum 28days compressive strength of mortar mixed with blended cement MRS1, MRS2 and MRS3 were developed with 15.8, 27.4 and 48.7MPa respectively, in condition to curing temperature $40^{\circ}C$ and water-cement ratio 37.5%. When blended cement MRS1 and MRS2 were used, the maximum flexural strength of mortar was developed at curing temperature $40^{\circ}C$ and water-cement ratio 35.0%. When blended cement MRS3 was used, the maximum flexural strength of mortar was developed at curing temperature $40^{\circ}C$ and water-cement ratio 37.5%. The absorption of mortar mixed with blended cement MRS1, MRS2 and MRS3 were indicated the range of $8.3{\sim}7.3%,\;6.5{\sim}8.5%$ and $3.5{\sim}6%$ respectively. Therefore, when the ratio of blended cement and RS is appropriately centre]led, it would be expected that MRS1, MRS2 and MRS3 will be able to apply the variable low strength, medium strength and high strength precaste concrete.
점토질 모래에 활성규조토 첨가시 투수계수와 중금속 고정능력에 관한 연구
홍지훈(Ji-Hoon Hong),임남웅(Nam-Woong Lim),김형진(Hyung-Jin Kim) 한국환경관리학회 2008 環境管理學會誌 Vol.14 No.2
본 연구에서는 폐기물 매립지 차수층에서 규조토를 함유한 고화제의 차수능과 중금속 제어효과를 알아보았다. 실험 결과 규조토를 첨가한 시료의 투수계수는 6.362×10??~1.891×10?? 로서 모두 투수계수 기준인 10??㎝/sec를 만족하는 것으로 나타났다. 중금속 용출시험결과 침출수는 Pb 3.1ppm, Cu 1.4ppm으로서 규제기준을 초과하였으나 규조토를 함유한 시료에서는 Cu 0.14ppm(2번 시료), 0.13ppm(5번 시료), 0.12ppm(8번 시료)이었으며 반면에 Pb는 검출되지 않았다. 고화제중 C고화제(70% diatomite, 15% Sodium silicate, 7.5% CaCl₂ and 7.5% MgCl₂)를 첨가한 8번 시료에서 중금속의 고정능력이 가장 우수한 것을 볼 수 있었으며 규조토 첨가시 투수계수 및 중금속 고정능력의 향상을 알 수 있었다. This study described the effect of additives with diatomite on permeability(k) and fixations of the heavy metals in the waste landfill liners. The results showed that k of soil liners with additive containing diatomite was 6.362×10??~1.891×10??㎝/sec which meet the standard requirement. The leaching test indicated that the leachate had 3.1ppm of Pb and 1.4ppm of Cu, exceeding compared with the standard limits, but those soil liners with additives containing diatomite had 0.14ppm (sample No 2), 0.13ppm (sample No 5), 0.12ppm (sample No 8) of Cu and no detection of Pb. Additive 'C' (mixed 70% diatomite, 15% Sodium silicate, 7.5% CaCl₂ and 7.5% MgCl₂) showed the best fixations capability of heavy metals. It was concluded that the additives containing diatomite showed acceptable permeability(k) and leaching level of the heavy metals.