http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고장 대응 훈련을 위한 시뮬레이터 고장 발생 메커니즘 소개
이훈희,구철회,주광혁,Lee, Hun-Hui,Gu, Cheol-Hoe,Ju, Gwang-Hyeok 한국천문학회 2012 天文學會報 Vol.37 No.2
우주비행체의 내부 장치 고장 혹은 외부 환경에 의한 고장이 발생할 경우를 대비하여 가상 모의 시뮬레이터를 이용한 고장 대응 훈련이 요구된다. 시뮬레이터 개발 초기에 이러한 고장 발생 메커니즘을 설계에 반영하지 않는 경우 교관이 작성한 고장 시나리오에 의한 유기적 고장 발생 및 고장 전파 기능을 납품 후 추가 요구하기는 용이하지 않다. 본 논문에서는 사용자가 시뮬레이터를 이용하여 의도하는 고장을 의미있는 시각(Epoch)에 주입하기 위한 고장 발생 메커니즘 구조를 설명한다. 또한 천리안위성 시뮬레이터 소프트웨어의 고장 발생 예제를 통해 고장 감지, 고장 복구, 관제원의 대응 방법 등을 설명한다.
Colloid gel(Slime)의 방사선 치료 시 표면 보상체로서의 유용성 평가
이훈희,김찬규,송관수,방문균,강동윤,신동호,이두현,Lee, Hun Hee,Kim, Chan Kyu,Song, Kwan Soo,Bang, Mun Kyun,Kang, Dong Yun,Sin, Dong Ho,Lee, Du Heon 대한방사선치료학회 2018 대한방사선치료학회지 Vol.30 No.1
목 적 : 본 연구는 colloid gel(slime)을 자체 제작하여, 방사선치료에서 불규칙한 환자 체표면에 대한 보상체로 적용하기 위하여 유용성을 평가하고자 한다. 대상 및 방법 : 본 연구를 위하여 치료에 적합한 colloid gel을 자체적으로 제작하였고, 방사선 치료 적용 가능성 평가를 위해 네 가지 실험을 하였다. 치료 장비 및 CT 장비로는 Trilogy(Varian)와 CT(SOMATOM, Siemens)를 이용하였다. 첫 번째로 colloid gel의 조성에 따른 균질도를 EBT3 Film(RIT)을 이용하여 측정하였다. 두 번째는 colloid gel의 Hounsfield Unit(HU)값을 CRIS phantom과 Eclipse RTP(Eclipse 13.1, Varian) 및 CT 촬영을 이용하여 선량 측정 및 확인을 하였다. 세 번째로 colloid gel의 치료 기간 내 변형 및 변질을 검사하기 위하여 ion chamber(PTW-30013, PTW)를 이용하여 매일 3회씩, 2주간 측정하였다. 네 번째 실험은 자체 제작한 아크릴 팬텀을 이용하여 실제 치료와 유사한 환경에서 bolus, rice, colloid gel을 이용한 치료계획 및 측정된 선량 분포 비교하였고, 추가적으로 dose profile도 확인하였다. 결 과 : 첫 번째 실험에서 조성된 colloid gel case 1, 2, 3의 밀도는 각각 평균 $1.02g/cm^3$, $0.99g/cm^3$, $0.96g/cm^3$이었으며, 6 MV 및 9 MeV에서 측정된 균질도를 판단하였을 때 case 1이 표준편차 1.55, 1.98로 다른 case들에 비해 더 균질한 것으로 확인되었다. 두 번째 실험에서는 HU값은 case 1, 2, 3 평균 15 HU로 확인되었으며, 치료계획과 측정된 선량을 비교하였을 때 9, 12 MeV 모든 측정 위치에서 1 % 이내 차이를 보였으며, 6 MV는 두 측정 위치에서 -1.53 %, -1.56 % 차이로 전체 2 % 내의 오차를 보였다. 세 번째 실험에서는 2주 동안 측정하였을 때 colloid gel의 선량변화가 1 % 내외로 측정되었다. 네 번째 실험에서는 치료계획과 EBT3 film으로 측정된 결과를 비교하였을 때 6 MV에서는 bolus, rice 모두 비슷한 선량 차이를 보였으며, 9 MeV에서는 photon과 달리 colloid gel이 bolus, rice와 비교하여 선량 차이가 적게 나는 것을 확인하였다. Dose profile 면에서도 colloid gel이 bolus, rice보다 균일한 dose 분포를 보였다. 결 론 : 본 연구에서 방사선치료를 위해 제작된 colloid gel의 밀도는 $1.02g/cm^3$로 물의 밀도와 비슷하며, 방사선치료 과정 동안 변질 및 변형이 확인되지 않았다. Colloid gel 제작 시 밀도에 유의를 해야 하지만, bolus, rice보다 환자의 체표면에 대한 충분한 보상을 통해 선량을 균일하게 전달할 수 있고, 저가에 제작을 할 수 있다는 점에서도 충분한 장점이 있다. 앞으로 임상적용을 위한 추가적인 실험 및 연구를 통해 방사선치료에 적용할 수 있을 것으로 사료된다. Purpose : In this study, we evaluated the usefulness of colloid gel(slime) as a compensator for irregular patient surfaces in radiation therapy. Materials and Methods : For this study, colloid gel suitable for treatment was made and four experiments were conducted to evaluate the applicability of radiation therapy. Trilogy(Varian) and CT(SOMATOM, Siemens) were used as treatment equipment and CT equipment. First, the homogeneity according to the composition of colloid gel was measured using EBT3 Film(RIT). Second, the Hounsfield Unit(HU) value of colloid gel was measured and confirmed by CRIS phantom, Eclipse RTP(Eclipse 13.1, Varian) and CT. Third, to measure the deformation and degeneration of colloid gel during the treatment period, it was measured 3 times daily for 2 weeks using an ion chamber(PTW-30013, PTW). The fourth experiment was compared the treatment plan and measured dose distributions using bolus, rice, colloid gel and additional, dose profiles in an environment similar to actual treatment using our own acrylic phantom. Result : First experiment, density of the colloid gel cases 1, 2 and 3 was $1.02g/cm^3$, $0.99g/cm^3$ and $0.96g/cm^3$. When the homogeneity was measured at 6 MV and 9 MeV, case 1 was more homogeneous than the other cases, as 1.55 and 1.98. In the second experiment, the HU values of case 1, 2, 3 were 15 and when the treatment plan was compared with the measured doses, the difference was within 1 % at all 9, 12 MeV and a difference of -1.53 % and -1.56 % within the whole 2 % at 6 MV. In the third experiment, the dose change of colloid gel was measured to be about 1 % for 2 weeks. In the fourth experiment, the dose difference between the treatment plan and EBT3 film was similar for both colloid gel and bolus, rice at 6 MV. But colloid gel showed less dose difference than bolus and rice at 9 MeV. Also, dose profile of colloid gel showed a more uniform dose distribution than the bolus and rice. Conclusion : In this study, the density of colloid gel prepared for radiation therapy was $1.02g/cm^3$ similar to the density of water, and alteration or deformation was not observed during the radiotherapy process. Although we pay attention to the density when manufacturing colloid gel, it is sufficient in that it can deliver the dose uniformly through the compensation of the patient's body surface more than the bolus and rice, and can be manufactured at low cost. Further studies and studies for clinical applications are expected to be applicable to radiation therapy.
이훈희,김방엽,백명진,양군호,천용식,Lee, Hoonhee,Kim, Bangyeop,Baek, MyungJin,Yang, Koonho,Chun, Yongsik 항공우주시스템공학회 2009 항공우주시스템공학회지 Vol.3 No.2
COMS On-board FDIR(Failure Detection, Isolation and Recovery) functions are implemented on the on-board software to satisfy the autonomy and failure tolerance requirements. This paper presents concepts of COMS Failure Management with hierarchical layers and addresses the characteristics of the FDIR layer from low level to high level. It is aimed at giving the reader the understanding how the COMS FDIR was designed and how works. It first recalls what are the system level applicable requirements, which are based on the COMS mission requirements. Then it describes the philosophy and structure of the FDIR and subsequently breaks it down into the several FDIR layers. It could be used as an important and useful reference of the information to design and develop an automatic FDIR mechanism in the future.
고속 스위칭 동작의 주파수 합성기를 위한 하이브리드형 구조 설계와 DLT 대체 회로 연구
이훈희,허근재,정락규,유흥균,Lee Hun-Hee,Heo Keun-Jae,Jung Rag-Gyu,Ryu Heung-Gyoon 한국전자파학회 2004 한국전자파학회논문지 Vol.15 No.12
기존의 PLL(phase locked loop)은 폐루프 구조이므로 주파수 스위칭 속도가 낮은 단점을 갖는다. 이를 개선하기 위해서 개루프 구조를 혼합한 Digital Hybrid PLL 구조를 연구하였다. 또한 이 구조는 빠른 주파수 스위칭 속도로 동작할 수 있지만, VCO의 전압대 주파수 전달특성을 ROM 형태로 구현하는 DLT(digital look-up table)이 사용되어야 하므로 회로소자가 많아지고 소비전력이 증가된다. 그러므로, 본 논문에서는 복잡한 DLT의 구조를 간단한 Digital logic 회로로 대체시킨 새로운 구조를 제안하였다. 또한 주파수 합성때마다 타이밍 동기화를 이루는 회로를 설계하여 합성기의 항상성을 확보하였으며 DLT를 사용하는 방식과 비교하여 회로소자를 약 $28\%$정도 줄일 수 있다. 고속 스위칭 동작 특성과 주파수 합성을 시뮬레이션과 실제 회로 구현으로 확인하였다. The conventional PLL(phase locked loop) frequency synthesizer takes a long switching time because of the inherent closed-loop structure. The digital hybrid PLL(DH-PLL) which includes the open-loop structure into the conventional PLL synthesizer has been studied to overcome this demerit. It operates in high speed, but the hardware complexity and power consumption are the serious problem because the DLT(digital look-up table) is usually implemented by the ROM which contains the transfer characteristic of VCO(voltage controlled oscillator). This paper proposes a new DH-PLL using a very simple DLT-replacement digital logic instead of the complex ROM-type DLT. Also, a timing synchronization circuit for the very small over-shoot and shorter settling time is designed for the ultra fast switching speed at every frequency synthesis. The hardware complexity gets decreased to about $28\%,$ as compared with the conventional DH-PLL. The high speed switching characteristic of the frequency synthesis process can be verified by the computer simulation and the circuit implementation.