http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이호일(Ho Il Lee),성원모(Won Mo Sung),박상훈(Sang Hun Park),윤호규(Ho Gyu Yoon) 한국산업융합학회 2006 한국산업응용학회 학술대회 논문집 Vol.- No.-
유전체인 BaTiO₃ 및 SrTiO₃와 가공성이 우수한 고분자 재료와의 복합재료를 제조하여, 유전체의 함량, 입자 크기, 계면 결합제 그리고 수지 종류에 따른 유전특성을 비교하였다. 유전체 함량이 증가하고 입자크기가 작을수록 유전성질은 증가하였고, 계면 결합제의 영향으로 배향 분극이 쉽게 일어나면 유전성질이 증가함을 확인하였다. 기저수지의 구조가 대칭이면서 분자량이 작으면 유전 성질이 감소함을 알 수 있었다. 그러므로 열가소성수지인 polyphenyleneoxide와 열경화성수지인 triallyl isocyanurate를 혼합한 복합재는 Interpenetrating network 구조를 형성하여 손실을 감소시킬 수 있었다.
폴리프로필렌-카본 블랙 혼합 수지로 제조한 부직포형 일렉트리트(electret) 공기 여과 소재의 정전기 특성이 여과 효율에 미치는 영향
오경근 ( Kyeong Keun Oh ),윤호규 ( Ho Gyu Yoon ),윤재만 ( Jae Man Yoon ),최응수 ( Ung Su Choi ) 한국공업화학회 2003 공업화학 Vol.14 No.1
폴리프로필렌(polypropylene, PP) 및 폴리프로필렌-카본 블랙(polypropylene-carbon black, PP-CB) 혼합 수지로 공압출 방사 시스템(spray-spinning extrusion system)과 코로나 대전 장치(corona charging unit)를 이용하여 일리트리트 섬유상 석과 소재(electret fibrous filter media)를 제조하여 정전기 특성 및 여과 특성에 대하여 고찰하였다. 제조한 부직포형 공기 여과 소재에 잔존하는 표면 전하 밀도(effective surface charge density, ESCD)를 진동 전극 기술을 이용하여 비접촉 방식으로 측정하였는데, 코로나 대전 전류가 증가할수록 또한 카본 블랙 함량이 증가할수록 표면 전하 밀도는 증가하였으며 코로나 대전 전류 200㎂, 카본 블랙 함량 4 wt%의 조건에서 재조한 여과 소재의 표면 전하 밀도가 최대값을 나타내었다. 필터 성능 시험기를 사용하여 여과 효율을 측정한 결과, 대전된 여과 소재가 대전되지 않은 경우보다 또한 카본 블랙 라량이 증가할수록 더 높은 여과 효율을 나타냈으며, 여과 효율 역시 표면 전하 밀도와 비례하였다. 이는 섬유상 여과 소재 자체의 전기장(electric field)에 의한 입자 포집률의 증가에 기인하는 것이다. 실험 결과, 표면 전하 밀도와 여과 효율은 밀접할 관계가 있는 것을 확인할 수 있었고 정전기적 특성이 향상된 여과 소재는 공기 정화 시스템의 핵심 부품으로 사용이 가능할 것이다. An electrostatically charged, electret fibrous filter mediun made from polypropylene (PP) and polypropylene-carbon black (PP-CB) was prepared by spray-spinning extrusion system which was equipped with a corona charging unit. The effect of electrostatic characteristics on filtration characteristics was investigated and ESCD (effective surface charge density) of the non-woven filter media was also measured by the vibrating electrode and non-contact compensating techniques. The results showed that the ESCD increased with corona and CB content. And the highest ESCD was achieved at 200㎂ of the corona current and 4 wt% of CB content. The results of filter test on filtration efficiency showed that the electrostatically charged filter media had an excellent filtrating ability compared to the uncharged filter media, and filtration efficiency was proportional to ESCD. The more CB in PP, the higher filtration efficiency was. It resulted from the increased particle-collection ability by electric field of fibrous filter media. Throughout the experimental results, filtration efficiency was closely dependent on the ESCO of filter media. In viewing the results so far achieved, the filter media which showed improvement in electrostatic characteristics in this study will be used as a key element of air purification system.
카본을 첨가한 LTCC 그린 시트에서 UV 레이저를 이용한 미세 홀 터짐 현상 제어
김시연,안익준,여동훈,신효순,윤호규,Kim, Shi Yeon,Ahn, Ik-Joon,Yeo, Dong-Hun,Shin, Hyo-Soon,Yoon, Ho Gyu 한국전기전자재료학회 2016 전기전자재료학회논문지 Vol.29 No.12
Hole explosion behaviors were observed during drilling fine holes with laser beam on the LTCC green bar of $320{\mu}m$ thick after lamination of green sheets prepared by tape casting of thick film process. The incidence of these hole explosions was inversely proportional to hole sizes. The incidence of hole explosion was 20 % number of hole with the size of $60{\mu}m$ exploded for the UV radiation, while the explosion did not appear for hole sizes over $100{\mu}m$. To prevent hole explosion behavior during laser-drilling of fine holes, carbon black powder was added as an additive in the LTCC composition, which has superior thermal durability. As a consequence, hole explosion rate was suppressed to 0.8 % for the hole size of $50{\mu}m$ green sheet with the carbon black amount of 10 weight % and the laser power of 3 watt. Added carbon is thought to reduce the heat-affected region during laser drilling.
Ni-Zn-Cu계 페라이트 시트에서 충진 밀도에 따른 시트 휨 현상
김시연,여동훈,신효순,송우창,윤호규,Kim, Shi Yeon,Yeo, Dong-Hun,Shin, Hyo-Soon,Song, Woo Chang,Yoon, Ho Gyu 한국전기전자재료학회 2015 전기전자재료학회논문지 Vol.28 No.12
It is necessary for ferrite sheets to be fabricated with high packing density for excellent electrical properties and high strength. In this study, the relationship between the warpage and the packing density of ferrite green sheet, was investigated with amount variation of organic additives. With 0.4 wt% of dispersant, the packing density was about 48% and warpage appeared 0.5~1.3 mm high. With 1.4 wt% of dispersant, the packing density increased up to 57% and warpage appeared 0.8~2.1 mm high. With high packing density, warpage appeared along the edges of specimen, while with low packing density, deformation appeared over whole specimen inhomogeneously. It is thought that inhomogeneous deformation after sintering came from the inhomogeneity in green sheet prepared with badly dispersed slurry. With good homogeneity in green sheet from well-dispersed slurry, isotropic shrinkage is thought to have occurred along the distance from center to edges of specimen during sintering.