http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
양홍석,서영찬,권수안,Yang, Hong-Suk,Suh, Young-Chan,Kwon, Soo-Ahn 한국도로학회 2001 한국도로포장공학회 논문집 Vol.3 No.3
콘크리트포장의 구조적 능력을 평가하는 가장 중요한 요소 중의 하나는 하중전달효과이다. 하중전달효과는 슬래브 상 하부 온도차, 다우월바 시공여부, 포장 노후도, 그리고 균열틈 등에 영향을 받는다. 본 연구의 목적은 콘크리트 포장의 하중전달효과 특성을 파악하고 하중전달효과에 영향을 주는 요소를 정량화하고 적절한 하중전달효과 조사방법을 제시하는 것이다. 연구결과 하중전달효과는 슬래브 표면온도가 아닌 슬래브 평균온도 영향을 받는 것으로 나타났다. 하중전달효과는 온도가 내려가고 균열틈이 벌어질수록 감소하는 것으로 나타났다. 다우월바를 시공한 구간의 경우 온도변화에 따라 하중전달효과는 큰 차이를 보이지 않은 반면, 다우월바를 시공하지 않은 구간에서는 온도가 내려갈수록 하중전달효과는 급격히 감소하였다. 다우월바를 시공한 구간이라도 포장이 노후화되면 하중전달효과는 온도가 하락함에 따라 감소하는 것으로 나타났다. 본 조사대상 구간에서는 슬래브 단위온도 하락시 하중전달효과는 1.4% 감소하는 것으로 나타났다. One of the most important factors accounting for the structural capacity of concrete pavement is load transfer efficiency. Load transfer efficiency is affected by slab temperature gradient, construction of dowel bars, degree of aging, and crack width. The purpose of this study is to determine the patterns of load transfer efficiency of concrete pavement; to determine the factors that affect the load transfer efficiency; and to present the proper measuring method of load transfer efficiency. As a result from this study, load transfer efficiency was affected primarily by the average temperature in concrete slab. Load transfer efficiency decreased with decreasing temperature and increasing crack width. For the sections with dowel bars, there were little differences in load transfer efficiency regardless of temperature changes. For the sections without dowel bars, however, there on great losses of load transfer efficiency at low temperatures. For the old pavement, even in the sections with dowel bars, the load transfer efficiency reduced as the temperature dropped For the sections in this study, 1.4% reduction of the load transfer efficiency was observed for each $1^{\circ}C$ drop in the slab temperature.
직접전단시험에 의한 모래와 인공암석 경계면의 마찰각 특성 연구
양홍석(Yang, Hong-Suk),이벽규(Lee, Byok-Kyu),장승진(Jang, Seung-Jin),이수곤(Lee, Su-Gon) 한국지반환경공학회 2012 한국지반환경공학회논문집 Vol.13 No.8
우리나라 화강암 분포지역에서 주로 발견되는 토사-암 경계면은 토사 자체의 전단강도보다 더 작은 값을 갖기 때문에 강우 시 비탈면 붕괴의 중요한 요인 중 하나로 알려져 있다. 그러나 토사-암 경계면이 비탈면의 안정성에 미치는 영향에 대한 연구가 부족한 실정이다. 따라서 본 연구에서는 토사-암 경계면이 비탈면 안정성에 미치는 영향을 파악하기 위한 기초 연구로써 서로 다른 입도를 갖는 세 종류의 모래와 이를 이용한 인공 암석을 제작하여 모래, 모래-인공암석 경계면에서의 전단강도를 얻기 위한 직접전단시험을 실시하였다. 직접전단시험 결과, 경계면 마찰각은 입도와 표면 거칠기에 따라 변화하며, 경계면 마찰각비 μ(=δ /Φ)는 약 0.75 ~ 0.96의 범위를 갖으며, 이러한 시험 결과들은 모래 자체보다 모래-인공암석 경계면의 마찰각이 더 작은 값을 갖는다는 것을 나타낸다. Soil-rock interface, mainly founded in Granite region of Korea, is known as one of the important factor of the slope failure at the rainfall due to smaller shear strength than soil itself. However, research of the effect on slope stability by soil-rock interfaces is insufficient. Therefore, a series of direct shear tests were performed in order to investigate the effect of soil-rock interface on slope stability. The method of tests is to get sand itself and sand-artificial rock interface shear strength from different grain size of sands and artificial rock samples. The results of tests show that the friction angle of interface depends primarily on particle size and surface roughness. Interface friction angle ratio μ(=δ /Φ) is in the range of 0.75 ~ 0.96, this results indicate that interface friction angle is smaller than sand itself.
이재혁,송진규,양홍석,최미선,Lee, Jae-Hyeok,Song, Jin-Kyu,Yang, Hong-Suk,Choi, Mi-Sun 대한건축학회 2011 대한건축학회논문집 Vol.27 No.2
The flat plate system is an undefined seismic resistance system in the design code. In general, it is designed as a building frame system or dual system with shear wall, which has not yet been verified. In this study, we investigated the system level seismic capacity for 45 shear-reinforced flat plate systems using a nonlinear pushover analysis. Overstrength factor and a effective response modification factor are used to major parameters to define seismic capacity of the system, both of which are design factors of the seismic resistance system in the KBC2009 as an index. Analysis results showed that the effective response modification factor had exceeded the value presented in the KBC2009 in most cases. But, in some cases, the overstrength factor failed to meet the value presented in the KBC2009. Therefore, the flat plate system cannot be generally defined as a dual system with shear wall. But, plat plate system reinforced with shear band showed the efficiency of RC intermediate moment resistance frame except for 5-story case.
침수식 초음파 검사와 부분결합간섭 검사를 이용한 공식의 정확성 비교
윤일석(Il Suk Yun),박아람(A ram Park),최신영(Shin Young Choi),양홍석(Hong Seok Yang) 대한안과학회 2016 대한안과학회지 Vol.57 No.6
목적: 침수성 초음파 장치와 수동 각막곡률계를 이용한 인공수정체 계산공식과 IOL MasterⓇ를 이용한 계산공식의 예측오차를 비교하여 안축장과 전방 깊이, 각막곡률에 따른 침수성 초음파 검사와 수동각막곡률계를 이용한 인공수정체 검사의 정확성에 대해 보고하고자 하였다. 대상과 방법: 단일 술자에 의해 백내장수술을 받은 환자 65명 82안의 의무기록을 후향적으로 검토하였다. 생체계측은 IOL MasterⓇ, 수동각막곡률계, 침수식 방식의 초음파 검사를 순서대로 시행하여 측정하였다. 초음파 방식과 수동각막곡률계로 구한 생체계측 값을 SRK-T, Holladay 1 공식에 대입하였고 IOL MasterⓇ를 이용한 생체계측 값을 장비에 내장되어 있는 SRK-T, Holladay 2 공식에 대입하여 백내장 수술 후 굴절력을 예측하였다. 백내장 수술 후 7주 이상 지난 시점에 현성 굴절 검사를 시행하여 최종 굴절력을 구하였고, 각 공식들의 예측치와 이를 비교하였다. 결과: 평균 안축장과 평균 각막곡률값은 계측기기 간에 의미 있는 차이를 보였다. 그러나 평균절대오차는 두 계측방식 간에, 그리고 공식들 간에 안축장과 전방 깊이, 각막곡률에 따라서 의미 있는 차이가 관찰되지 않았다. 그러나 안축장과 전방 깊이, 각막곡률에 따라서 예측오차가 ±0.5디옵터 이내에 속하는 백분율은 4가지 공식들 간에 차이를 보였다. 결론: 침수식 초음파와 수동 각막곡률계를 이용한 생체계측 방식은 IOL MasterⓇ 방식과 비교하여 그 정확성이 떨어지지 않는 것으로 보인다. 그러나 더 정확한 인공수정체의 선택을 위해서는 안축장, 전방 깊이, 각막곡률에 따라서 더 적절한 인공수정체 공식을 선택하는 것이 필요할 것으로 생각된다. <대한안과학회지 2016;57(6):905-916> Purpose: To report the accuracy of intraocular lens (IOL) formulas according to axial length, anterior chamber depth, and mean corneal curvature when performing biometry with an immersion type A-scan with mannual keratomery and an IOL Master??. Methods: Retrospective medical chart reviews were carried out for 82 eyes of 65 patients who underwent cataract surgery performed by a single surgeon. Biometry was performed using IOL Master??, mannual keratometry, and immersion type A-scan ultrasound in sequence. Prediction diopter was obtained using Sanders-Retzlaff-Kraff/Theoretical (SRK-T) and Holladay 1 formulas calculated with the biometric value measured by mannual keratomery and A-scan, and using SRK-T and, Holladay 2 formulas with IOL Master??. The final refractive outcome was determined as manifested refraction at least 7 weeks after the surgery, and it was compared with the preoperative prediction dipoter (D) of the IOL formulas. Results: Mean axial length and mean keratomtric measurements as determined by A-scan with mannual keratomery showed significant statistical differences from those of IOL Master??. However, there was no difference in postoperative mean absolute error between biometric measurements, or among formulas according to axial length, anterior chamber depth, or mean corneal curvature. However, the percentage of actual refraction within ±0.50 D of the intended refraction was dirrerent among the four formalas according to axial length, anterior chamber dept, mean corneal curvature. Conclusions: Biometry measurement using the immersion-type A-scan with mannual keratomery is as accurate as that using IOL Master?? for predicting the postoperative refractive state of cataract surgery. However, it is suggested that the best IOL formula be chosen according to axial length, anterior chamber depth, and mean corneal curvature. J Korean Ophthalmol Soc 2016;57(6):905-916