http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
초고속 대면적 표면 처리 장치가 부착된 300 mm 폭 연성 동박적층 필림 제작용 진공 웹 코터
최형욱,박동희,김지환,최원국,손영진,송범식,조정,김영섭,Choi, H.W.,Park, D.H.,Kim, J.H.,Choi, W.K.,Sohn, Y.J.,Song, B.S.,Cho, J.,Kim, Y.S. 한국진공학회 2007 Applied Science and Convergence Technology Vol.16 No.2
저에너지 초고속 표면 처기 이온원, 4개의 마그네트론 스퍼터 캐소드가 부착된 300 mm 폭 다목적 연성 기판 제작을 위한 부피 800 L 용량의 진공 웹코터 원형 (prototype) 장비를 설계 제작하였고, 무접착제 2층 연성 동박 적층 필림을 제작하여 성능을 평가하였다. 2 개의 터보 펌프 및 폴리콜드를 장착한 비코팅 부분인 상실부와 각각 1개씩의 터보 펌프를 사용한 표면 처리 및 코팅 부분인 하실부의 진공 배기 특성을 측정하였다. 패러데이 컵을 사용하여 대면적 이온원의 이온 전류 밀도 및 균일도를 측정하고, 스퍼터 캐소드의 자기장 분포 및 타겟 사용 효율을 조사하였다. 진공 웹코터의 성능 및 각 구성 요소의 특성 조사를 위하여 연성 기판으로는 폴리이미드 (Kapton-E) $38{\mu}m$을 사용하여 여러 가지 가스 이온에 대한표면 처리 조건에 따른 증류수의 접촉각 변화와 화학 성분의 변화를 x-선 분광학을 사용하여 조사하였다. 고밀도 2층 연성 동박 적층 필림 기판을 스퍼터-전기 도금법으로 제작하기 위하여 스퍼터 타겟으로는 Ni-Cr 및 Cu 금속을 사용하여, 각각의 증착율을 직류 전력의 변화 및 롤의 속도에 따라 조사하였고, 전기 도금으로 $9{mu}m$ 까지 동박 적층 필림을 제작한 후 접착력 및 내열성, 내화학성을 측정하여 소형 진공 웹 코터의 특성을 조사하였다. Prototype of $800{\ell}$ vacuum web coater (Vic Mama) consisting of ion source with low energy less than 250 eV for high speed surface modification and 4 magnetron sputter cathodes was designed and constructed. Its performance was evaluated through fabricating the adhesiveless flexible copper clad laminate (FCCL). Pumping speed was monitored in both upper noncoating zone pumped down by 2 turbo pumps with 2000 l/sec pumping speed and lower surface modification and sputter zone vacuumed by turbo pumps with 450 1/sec and 1300 1/sec pumping speed respectively. Ion current density, plasma density, and uniformity of ion beam current were measured using Faraday cup and the distribution of magnetic field and erosion efficiency of sputter target were also investigated. With the irradiation of ion beams on polyimide (Kapton-E, $38{\mu}m$) at different fluences, the change of wetting angle of the deionized water to polyimide surface and those of surface chemical bonding were analyzed by wetting anglometer and x-ray photoelectron spectroscopy. After investigating the deposition rate of Ni-Cr tie layer and Cu layer was investigated with the variations of roll speed and input power to sputter cathode. FCCL fabricated by sputter and electrodeposition method and characterized in terms of the peel strength, thermal and chemical stability.
초고속 대면적 표면 처리 장치가 부착된 300 ㎜ 폭 연성 동박적층 필림 제작용 진공 웹 코터
최형욱(H.W. Choi),박동희(D.H. Park),김지환(J.H. Kim),최원국(W.K. Choi),손영진(Y.J. Sohn),송범식(B.S. Song),조정(J. Cho),김영섭(Y.S. Kim) 한국진공학회(ASCT) 2007 Applied Science and Convergence Technology Vol.16 No.2
저에너지 초고속 표면 처리 이온원, 4개의 마그네트론 스퍼터 캐소드가 부착된 300 ㎜ 폭 다목적 연성 기판 제작을 위한 부피 800ℓ 용량의 진공 웹코터 원형 (prototype) 장비를 설계 제작하였고, 무접착제 2층 연성 동박 적층 필림을 제작하여 성능을 평가하였다. 2 개의 터보 펌프 및 폴리콜드를 장착한 비코팅 부분인 상실부와 각각 1개씩의 터보 펌프를 사용한 표면 처리 및 코팅 부분인 하실부의 진공 배기 특성을 측정하였다. 패러데이 컵을 사용하여 대면적 이온원의 이온 전류 밀도 및 균일도를 측정하고, 스퍼터 캐소드의 자기장 분포 및 타겟 사용 효율을 조사하였다. 진공 웹코터의 성능 및 각 구성 요소의 특성 조사를 위하여 연성 기판으로는 폴리이미드 (Kapton-E) 38 ㎛을 사용하여 여러 가지 가스 이온에 대한 표면 처리 조건에 따른 증류수의 접촉각 변화와 화학 성분의 변화를 x-선 분광학을 사용하여 조사하였다. 고밀도 2층 연성 동박 적층 필림 기판을 스퍼터-전기 도금법으로 제작하기 위하여 스퍼터 타겟으로는 Ni-Cr 및 Cu 금속을 사용하여, 각각의 증착율을 직류 전력의 변화 및 롤의 속도에 따라 조사하였고, 전기 도금으로 9 ㎛까지 동박 적층 필림을 제작한 후 접착력 및 내열성, 내화학성을 측정하여 소형 진공 웹 코터의 특성을 조사하였다. Prototype of 800ℓ vacuum web coater (Vic Mama) consisting of ion source with low energy less than 250 eV for high speed surface modification and 4 magnetron sputter cathodes was designed and constructed. Its performance was evaluated through fabricating the adhesiveless flexible copper clad laminate (FCCL). Pumping speed was monitored in both upper noncoating zone pumped down by 2 turbo pumps with 2000 l/sec pumping speed and lower surface modification and sputter zone vacuumed by turbo pumps with 450 l/sec and 1300 l/sec pumping speed respectively. Ion current density, plasma density, and uniformity of ion beam current were measured using Faraday cup and the distribution of magnetic field and erosion efficiency of sputter target were also investigated. With the irradiation of ion beams on polyimide (Kapton-E, 38㎛) at different fluences, the change of wetting angle of the deionized water to polyimide surface and those of surface chemical bonding were analyzed by wetting anglometer and x-ray photoelectron spectroscopy. After investigating the deposition rate of Ni-Cr tie layer and Cu layer was investigated with the variations of roll speed and input power to sputter cathode. FCCL fabricated by sputter and electrodeposition method and characterized in terms of the peel strength, thermal and chemical stability.
이균정,박동희,신태민,서종범,Lee, G.J.,Park, D.H.,Shin, T.M.,Seo, J.B. 대한의용생체공학회 2008 의공학회지 Vol.29 No.4
Plastic hardener and softener based ultrasound phantoms were made in various constitutions and their acoustic properties were measured. Speed of sound is approximately $1.4\;mm/{\mu}sec$ in all the phantoms, which is about 7% less than that of in soft tissue. Attenuation coefficient is strongly dependent on the ratio between hardener and softener. In order to achieve the tissue level attenuation (0.5 dB/cm/MHz), 60% of hardener or less is required. The synthesized phantoms can be preserved for more than 6 months without structural degradation.