http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
남진원 ( Nam Jin-won ) 한국구조물진단유지관리공학회 2019 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.23 No.1
In this research, the measurement of vibration for stay-cable installed in cable stayed bridge was carried out by using wireless accelerometer. The vibration measurement data can be used for the evaluation of safety and serviceability of cable stayed bridge. The acquired data was analyzed for the evaluation of maximum vibration, tension force and fatigue. To verify the reliability of data, the additional measurements with total station and video camera. The data from three different measurement methods showed similarity within 15 % gap.
남진원,김호진,김성배,김장호,변근주,Nam, Jin-Won,Kim, Ho-Jin,Kim, Sung-Bae,Kim, Jang-Ho Jay,Byun, Keun Joo 한국건설순환자원학회 2007 한국건설순환자원학회지 Vol.3 No.1
This study is a fundamental research in order to establish the design code of recycled aggregate concrete structure. The structural properties of recycled aggregate concrete such as flexure, shear, fatigue, compression, and bond development are experimentally investigated and confirmed. In this study, laboratory-scale reinforced concrete beam, column, and pull-out test specimens using recycled coarse aggregate are manufactured. Then, the structural performances of recycled aggregate concrete according to replacement ratios of recycled coarse aggregate are evaluated. Also, finite element analysis using commercial code DIANA is carried out to predict the test results and the analysis results are compared with test results in this study. Structural test results showed that the structural performances of recycled aggregate concrete specimens with 60% replacement ratio are reduced by approximately 15-20%. These results indicated that the replacement ratio of recycled coarse aggregate within 30% is a suitable to use for structural members. The results of finite element analysis showed that the specimens with 30% replacement ratio possessed similar or more excellent structural performance than normal concrete specimens. However, recycled aggregate concrete with 60% replacement ratio of recycled coarse aggregate must be carefully considered for structural applications due to significant decrease of the failure loads.
남진원 ( Nam¸ Jin Won ) 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.24 No.2
아치 교량 등의 행어 부재는 풍하중에 의해 진동이 발생하고 이로 인해 안전성에 영향을 미칠 수 있다. 특히, 비틀림 등으로 인해 행어에 설치된 진동 방지재가 탈락하는 경우도 발생한다. 본 연구에서는 진동방지재가 설치된 행어의 진동 특성을 파악하기 위하여 가속도계를 이용하여 고유진동수 및 진동 모드를 파악하고 이를 바탕으로 진동방지재의 기능을 검증하였다. H형강으로 제작된 행어에 대해 플랜지 부분에 대칭으로 가속도계를 설치하여 휨모드와 비틀림 모드의 진동 특성을 구분하였다. 계측된 가속도 데이터를 바탕으로 산정한 부재의 고유진동수는 내풍에 대한 목표 비틀림 진동수와 비교하여 안정성을 확인하였다.
계측시스템 설치상태를 고려한 유지관리 성능관리기준 설정에 관한 연구
남진원 ( Nam Jin-won ) 한국구조물진단유지관리공학회 2023 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.27 No.1
주요 사회기반 시설물들의 상시 유지관리를 위한 계측모니터링시스템에서 활용되고 있는 유지관리 관리기준은 설계값이나 통계 및 확률 등이 반영되어 결정되고 있다. 설계값은 이론적인 구조물의 극한 거동을 고려하고, 통계 및 확률론적인 방법은 축적된 장기 데이터를 바탕으로 평소와는 다른 이상거동을 탐지하게 된다. 하지만, 이러한 관리기준은 계측시스템의 설치 과정에서 발생하는 기계오차를 반영하고 있지는 않다. 본 연구에서는 교량의 유지관리계측시스템에서 주로 사용되는 변형률계의 설치과정에서 발생하는 근본적인 계통오차를 고려하여 유지관리 관리기준치를 보완할 수 있는 방법을 제안하였다. 변형률계의 설치오차로 인하여 실제 거동보다 작게 나타날 수 있는 데이터의 반복적 기계오차를 보완하여, 유지관리 모니터링 시스템이 가질 수 있는 과소평가 오류를 수정하였다.
공동주택 층간소음 저감을 위한 능동소음제어(ANC) 기술 적용가능성 분석
남진원,김호진,김준환,위혁,김중관,Nam, Jin-Won,Kim, Ho-Jin,Kim, Jun-Hwan,Wee, Hyuk,Kim, Joong-Kwan 한국구조물진단유지관리공학회 2022 한국구조물진단유지관리공학회 논문집 Vol.26 No.5
In this study, numerical simulations for reducing noise between floors in an apartment building was carried out using Active Noise Control (ANC) technology. In order to examine the feasibility of using ANC to reduce noise between floors, accelerometers and microphones for noise collection were installed in the inter-floor noise test facility to measure noise and vibration caused by the impact ball drop test. By using the measured data, Filtered-x Least Mean Square (Fx-LMS) algorithm-based ANC simulations were carried out. In the simulations, after deriving optimal simulation conditions including the adaptive control convergence coefficient, the noise reduction effect was analyzed through numerical simulations using the number of installed accelerometers and speakers as variables. Finally, it was confirmed that the noise between floors could be reduced using ANC technology under limited conditions.