http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
산화물 혼합상이 페라이트계 P/M스테인리스강의 고온산화 및 전기저항 안정성에 미치는 영향
박진우,고병현,정우영,박동규,안인섭,Park, Jin-Woo,Ko, Byung-Hyun,Jung, Woo-young,Park, Dong-Kyu,Ahn, In-Shup 한국분말야금학회 2016 한국분말재료학회지 (KPMI) Vol.23 No.3
In order to improve the high-temperature oxidation stability, sintered 434L stainless steel is studied, focusing on the effect of the addition of metallic oxides to form stable oxide films on the inner particle surface. The green compacts of Fecralloy powder or amorphous silica are added on STS434L and oxidized at $950^{\circ}C$ up to 210 h. The weight change ratio of 434L with amorphous silica is higher than that of 434L mixed with Fecralloy, and the weight increase follows a parabolic law, which implies that the oxide film grows according to oxide diffusion through the densely formed oxide film. In the case of 434L mixed with Fecralloy, the elements in the matrix diffuse through the grain boundaries and form $Al_2O_3$ and Fe-Cr oxides. Stable high temperature corrosion resistance and electrical resistivity are obtained for STS434L mixed with Fecralloy.
P/M Fecralloy의 성형성 및 전기저항특성 향상에 관한 연구
박진우,고병현,정우영,박동규,안인섭,Park, Jin-Woo,Ko, Byung-Hyun,Jung, Woo-Young,Park, Dong-Kyu,Ahn, In-Shup 한국분말야금학회 2016 한국분말재료학회지 (KPMI) Vol.23 No.6
The Fe-Cr-Al alloy system shows an excellent heat resistance because of the formation of an $Al_2O_3$ film on the metal surface in an oxidizing atmosphere at high temperatures up to $1400^{\circ}C$. The Fecralloy needs an additive that can act as a binder because of its bad compactability. In this study, the green compacts of STS434L and Al powder added to Fecralloy are oxidized at $950^{\circ}C$ for up to 210 h. Fecralloy and Al is mixed by two types of ball milling. One is vented to air and the other was performed in a sealed jar. In the case of Al addition, there are no significant changes in the electrical resistance. Before the oxidation test, Al oxides are present in the Fecralloy surface, as determined from the energy dispersive spectroscopy results. The addition of Al improves the compactability because of an increased density, and the addition of STS434L increases the electrical resistivity by forming a composite oxide.
Fe-P-(Mo,Mn)계 소결분말 합금에서 Si 첨가에 따른 기계적 특성 변화에 대한 연구
정우영,박동규,고병현,박진우,안인섭,Jung, Woo-Young,Park, Dong-Kyu,Ko, Byung-Hyun,Park, Jin-Woo,Ahn, In-Shup 한국분말야금학회 2016 한국분말재료학회지 (KPMI) Vol.23 No.5
A lean alloy is defined as a low alloy steel with a minimum amount of the alloying element that maintains the characteristics of the sintered alloy. It is well known that the addition of elements such as Cr, P, Si, or Mn improves the mechanical characteristics of the alloy, but decreases the sinterability. The mother alloy is used to avoid an oxidation reaction with the alloying elements of Cr, P, Si or Mn. The purpose of this study is to determine the change in the mechanical properties of Fe-P-Mo and Fe-P-Mn alloys as a result of the addition of Si. In this article, the Fe-P-Mo and Fe-P-Mn alloys to which Si is added are compacted at $7.0g/cm^3$ and then sintered in $H_2-N_2$ at $1120^{\circ}C$. The P around the macropores and large grains reduces due to the formation of $SiO_2$ as the Si content increases. This is caused by the increase in strength owing to reducing intergranular fracture by suppressing the reaction with oxygen.
김민철(Min-Chul Kim),고병현(Byung-Hyun Ko),안중환(Jung-Hwan Ahn),한석만(Seok-Man Han),김발호(Bal-Ho H. Kim) 대한전기학회 2012 대한전기학회 학술대회 논문집 Vol.2012 No.5
우리나라의 전력소비량은 매년 증가하고 있고, 이에 따른 적정 예비력을 유기하기 위해 전력수급계획을 수립하여 시행하고 있지만 각종 규제 및 어려움에 문제가 발생하고 있다. 현재 우리나라의 전력소비량은 수도권에서 가장 많은 소비를 하는 반면, 발전설비용량은 이에 매우 못 미치는 실정이다. 수도권에서의 전력수요의 대부분을 차지하는 산업 부문 소비자의 지방이전을 통한 거대수요 분산화를 그 목적으로 하여 북상선로 건설에 과다 소요되는 비용을 절감하고, 안정적인 송전선로 이용을 통한 전체 계통안정도를 유지하는 방법에 대한 내용을 담고 있다. 이에 따른 방법으로 수요관리 방법을 통한 CPP 요금제를 바탕으로 하는 지역별 요금제의 도입을 통해 전력수요를 수도권 중심이 아닌 전국적으로 분산화를 시키고, 전력수급 균형을 위한 새로운 사업자의 입지선정에 대한 방법론을 이 글에서 설명하고자 한다.
안중환(Jung-Hwan Ahn),고병현(Byung-hyun ko),김민철(Min-chul Kim),한석만(Seok-Man Han),김발호(Balho H. Kim) 대한전기학회 2012 대한전기학회 학술대회 논문집 Vol.2012 No.5
현재 우리나라의 전력산업은 대내외적으로 다양한 환경적 변화에 직면하고 있다. 2015년에는 온실가스 감축 정책의 일환으로 배출권 거래제도가 도입될 예정이다. 그러나 이러한 환경적 변화를 현행 전원개발계획의 전산모형인 WASP에서는 적절히 처리하지 못하는 한계점을 가지고 있다. 본 논문에서는 이러한 한계점을 극복하기 위한 방법론을 제시하였고 이를 바탕한 모형을 개발하였다. 또한, 개발 모형을 이용해 배출권 거래제 도입시 전원개발계획의 영향에 대해 분석하였다.