http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
석탄의 종류 , 농도 및 첨가제가 석탄 - 물 혼합연료의 유동특성에 미치는 영향
김수호,황갑성,홍성선 ( Soo Ho Kim,Kap Sung Hwang,Song Sun Hong ) 한국공업화학회 1997 공업화학 Vol.8 No.4
석탄의 종류와 농도 및 CWM의 유동성을 증가시키기 위해 첨가되는 계면활성제와 전해질이 CWM의 유동특성에 미치는 영향을 조사하였다. 탄종에 따른 CWM의 점도는 O/C 비가 높을 수록 높게 나타났다. 또한 CWM은 항복응력을 갖는 비뉴톤유체의 특성을 나타내며, 항복응력은 농도가 증가함에 따라 선형적으로 증가하였다. 첨가제로 사용된 계면활성제에 따른 CWM의 유동특성은 첨가되는 계면활성제의 농도에 관계없이 n< 1인 pseudoplastic의 특성을 나타내었다. 또한 전해질의 투입량이 증가할수록 n은 1로 접근하여 CWM이 뉴톤유체에 접근하는 것으로 나타났으며, 전해질을 0.05wt.% 이상 첨가하였을 때는 항복응력이 나타나지 않았다. We investigated that how both the type and the concentration of coal and the surfactant and the electrolyte added to increase the fluidity of CWM influence rheological characteristics. According to the type of coal, the viscosity of CWM was increased with increasing O / C ratio. Also, the CWM was represented the property of non-Newtonian fluid, having yield stress which was linerarly increased with increasing coal concentration. According to the surfactant used as an additive, the rheological characteristics of CWM was represented the pseudoplastic property as n < 1 without relating to the concentration of added surfactants. Also, according to the increase of the amount of electrolyte, n was nearly approached 1. Therfore, we found that CWM opproched Newtonian fluid and that when more than 0.05wt.% of electrolyte were added, yield stress was not shown up.
문재철,김수호,황갑성,홍성선 ( Jae Choel Mun,Soo Ho Kim,Kap Sung Hwang,Song Sun Hong ) 한국공업화학회 1997 공업화학 Vol.8 No.1
냉동 건조에서 주기적 압력 함수의 이용은 정압에서의 건조 속도보다 더 효과적으로 나타났다. 이러한 공정의 궁극적인 목적은 건조 시간을 감소시킴으로써 에너지 비용을 줄이는데 있다. 이 연구에서 건조 시간을 감소시키기 위해 주기적 압력 함수에 대한 개념을 도입하여 건조 속도에 영향을 미치는 인자들 - 펄스의 형태, 압력 진폭의 크기, 중간 시간의 길이 - 에 대한 영향을 고려하였다. 건조 온도는 항상 20℃로 일정하게 유지하였다. 그리고 펄스의 형태는 일정한 압력의 형태보다 저압에서 고압으로 압력을 변화시키는 주기를 주는 것이 더 유리함을 알 수 있었다. 또한 펄스의 진폭크기는 작을수록 그리고 중간 시간은 길수록 건조 속도가 상당히 증가되었다. We show that the usage of the cyclic pressure function in the freeze drying is more effective than the drying rate of the constant pressure process. The ultimate object of this process is to reduce energy costs by shortening the drying time. In this work, the concept of cyclic pressure function to decrease the drying time and the effects of the following factors on drying rate are considered ; pulse type, size in amplitude of pressure, size of intermediate time. Temperature for drying has always been maintained constantly at 20℃ and the pulse type could have found to give useful results than the constant pressure by altering chamber pressure from low pressure to high pressure Also, when the amplitude of the pulse is 0.4 torr and the intermediate time is six hour the drying rate was increased considerably.
백일현,김춘호,민병우,황종식,홍성선 ( Il Hyun Baek,Choon Ho Kim,Byoung Moo Min,Jong Sic Hwang,Song Sun Hong ) 한국공업화학회 1997 공업화학 Vol.8 No.2
펜탄용매를 이용하여 상압잔사유로부터 고급 경질 탄화수소의 추출실험을 수행하였다. 추출공정 계산에 앞서 복잡한 혼합물로 구성된 상압잔사유의 진비점을 계산하기 위하여 모사증류방법을 이용하였다. 추출공정 계산절차를 간단히 하기 위하여 재분류 방법을 이용하여 많은 성분을 포함하고 있는 상압잔사유를 성상이 유사한 몇 개의 가상성분으로 분류하였다. 상압잔사유-펜탄계 추출공정의 모사는 등온 플래시 방법에 기초를 두고 있으며, 계산과정 중 기상과 액상에서의 퓨개시티 계수를 계산하기 위하여 Pang-Robinson 상태방정식을 이용하였다. 복잡한 계산과정을 포함하고 있는 추출공정 모사에 비하여 실험치는 계산치와 잘 일치하였다. Extraction of valuable light hydrocarbon from atmospheric residue using pentane as a solvent has been carried out. The SIMDIS was used to calculate the true boiling point of atmospheric residue containing complex components before the modeling of the extraction process could be performed. In order to simplify the procedure, modeling was adopted and a lumping method was used, such that a large number of compounds were divided into similar component classes called pseudocomponents. The modeling of the extraction process of the atmospheric residue-pentane system was based on the isothermal flash calculation, and the Peng-Robinson equation of state was used to calculate the fugacity coefficient of vapor and liquid phase during calculation steps of modeling. The agreement between the experiments and the calculations was reasonable considering the uncertainties involved in modeling such complex processes.
초임계 공정을 이용한 석유잔사유로부터 경질 탄화수소의 추출
백일현,김춘호,김동식,김성현,홍성선,이동규 ( Il Hyun Baek,Choon Ho Kim,Dong Sik Kim,Sung Hyun Kim,Song Sun Hong,Dong Kyu Lee ) 한국공업화학회 1995 공업화학 Vol.6 No.2
초임계 공정으로 석유잔사유로부터 경질 탄화수소를 추출하기 위하여 펜탄 용매를 이용하였다. 온도 및 압력의 변화에 따른 추출 특성을 조사하기 위하여, 추출실험을 온도 483K, 503K 및 523K에서, 압력 4.4㎫∼12.0㎫에서 수행하였다. 추출수율은 시스템 압력이 증가함에 따라, 펜탄 용매의 초임계 영역에서 임계온도로 접근할수록 증가하였다. 또한 임계밀도 이하에서 급격한 추출수율 감소는 액-액과 같은 시스템에서 기-액과 같은 시스템으로 이동하기 때문이라 예측된다. 추출유의 GC 분석결과 초기 추출물은 비교적 경질 화합물을 포함하고 있으나, 추출시간이 경과함에 따라 탄소수 분포는 중질 탄소수로 이동하고 있음을 나타내었다. Supercritical extraction of light hydrocarbon from residues remaining after distillation of crude oil, has been carried out by n-pentane solvent. In order to investigate the extraction characteristics upon the variation of temperature and pressure, the experiments were performed at 483K, 503K and 523K with pressure range from 4.4㎫ to 12.0㎫, respectively. The extraction yield has shown to be increased with the system pressure and the temperature approaching down to critical state of n-pentane from the supercritical region. A drastic fall down exhibited in yield under critical density may be stemmed from a phase transition from liquid-liquid-like system to a liquid-vapor-like system. GC analysis of extracted oil revealed that the earlier extracts contain relatively lighter compounds, and the carbon number distribution of the extract has shifted toward the heavier carbon number with lapse of operation time.