ISO 9000/14000 통합경영시스템에 관한 연구 - 프로세스 중심 모형과 구축사례

현승용(Seung-Yong Hyun),최윤석(Yoon-Seok Choi) 한국생산관리학회 2007 韓國生産管理學會誌 Vol.18 No.4

  본 연구의 목적은 품질경영시스템과 환경경영시스템을 각각 별개의 시스템으로 구축함에 따른 추진상의 비용증대는 물론 조직운용에 상호모순 등을 초래하는 여러 가지 관리시스템의 중복된 절차와 혼란을 줄이기 위해 프로세스 중심으로 ISO 9000/14000 통합경영시스템 구축 사례를 고찰 하고자 한다. 구체적으로는 프로세스중심으로 품질경영시스템과 환경경영시스템을 통합하는 통합경영시스템 구축 모형을 찾아본 후, 통합경영 시스템의 실제 구축사례를 분석하여 품질과 환경의 조화로운 병용성을 확립하고, 프로세스 접근방식 중심의 통합경영 시스템의 확립방안을 제시하고자 한다. 기존의 절차서 중심의 통합경영시스템 대신, 실제 적용 사례를 기반으로 한 분석 및 제시점을 제안함으로써 프로세스 중심의 통합경영시스템을 구축하는 실무자에게 도움을 주고자 한다.   This study consists of two phases, the first is the development of ISO 9000/14000 integrated management system for R motor company based on the process oriented modelling and then analyzing and evaluation of the system follows as the second phase.<BR>  The process oriented approach will help to reduce duplicated procedures and disorder of implementation sequence given by the traditional way known as a procedure oriented model. Also this study shows improvement of cost structure when we establish each quality management system and environmental management system simultaneously into a single integrated management system.<BR>  In this study. the process oriented integrated management system show to harmonize and facilitate the implementation procedures and reenforce the establishment of both quality and environment management issues. The the practical guidelines are also provided in the last chapter in order to help for practitioners who want to adopt this process oriented system.

양생온도 및 초지연제 혼입율 변화에 따른 응결지연 성능

현승용 ( Hyun Seung-yong ),임군수 ( Lim Gun-su ),김종 ( Kim Jong ),한민철 ( Han Min-choel ),한천구 ( Han Cheon-goo ) 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.24 No.2

본 연구에서는 응결시간 지연용 초지연제를 사용한 콘크리트의 성능 확보 방안을 고찰하기 위한 연구로서 건설공사 현장에서 영향을 받을 수 있는 양생온도 변화에 따른 초지연제 콘크리트의 응결성능을 분석하였다. 초지연제를 0.5 %까지 혼입할 경우 20℃에서는 22.3시간, 35℃에서는 8.7시간 지연되는 것으로 나타나 양생온도가 높아짐에 따라 응결지연성능이 감소하는 것으로 나타났다.

한국 반도체 산업의 유럽 진출에 관한 전략 연구

현승용(Seung Yong Hyun) 한국유럽학회 2000 유럽연구 Vol.11 No.-

Korean semiconductor industry became a leading international producer within a short period of time as a result of surviving cut-throat competition with producers from industrialized countries. As the electronic industry began approaching the saturation stage, however, Korean manufacturers faced such difficulties to keep up the current competitive position as lack of the structural adjustments in product lines and relevant technology innovation. In order to restore the competitive edge in Korean semiconductor industry, the fundamental strategic change are required such as restructuring of the main production lines and reconstruction of global management network. Korean semiconductor manufacturers need to consider the consistent adapting of advanced technology in relevant areas, and the expanding of global operations through FDI by taking advantage of the accumulated memory products technology and success. European countries, in particular, have the considerable values for Korean manufacturers` global operations, such as the well developed R&D programs, the superior technology of telecommunications and electronic devices, and the geographical advantages for global management networks. This study provides the strategic scheme of cooperative tie with European semiconductor industry to increase competitiveness of Korean industry. It suggests the strategic global operations in Europe by consorting with European R&D programs like JESSP, MEDEA, GRESSI, IMEC. Also it shows the supportive operations tactics in order to get the efficiency and effectiveness of FDI in Europe. Based on the previous case activated by one of the Korean semiconductor companies, it`s strategy and practice are analyzed and the strategic suggestion is provided in practical way.

우리나라 신발산업 경쟁력 제고를 위한 c-SCM 비즈니스 모델

현승용(Seung-Yong Hyun),최형림(Hyung-Rim Choi),유동호(Dong-Ho Yoo),황수진(Su-Jin Hwang) 한국생산관리학회 2006 한국생산관리학회지 Vol.17 No.1

현재 우리나라 신발산업은 고객만족을 최우선 목표로 삼고, 내부프로세스 개선의 활동을 통한 원가절감과 생산성 향상에 집중하고 있다. 이에 비해 외부와의 정보공유를 위한 노력은 기울이지 못하고 있는 실정이다. 이로 인해 산업전체가 하나의 유기체와 같이 움직이지 못하게 되어 시너지 효과(synergy effect)를 창출하지 못하고 있다. 이에 본 연구진은 이러한 문제를 해결하기 위해 신발업체가 생산과 관련한 다양한 정보를 공유함으로써 산업 전반적인 효과를 거둘 수 있도록 하는 비즈니스 모델을 개발하고자 하였다. Now, the Korean footwear industry needs the concrete enhancement of its competitive edge for regaining of its previous well known reputation. For this purpose, this study emphasizes the cooperation between the members through the supply chain of korean footwear industry, as a c-SCM (Collaborative Supply Chain Management). In this study, at first we analyze the traditional structure of supply chain in Korean footwear industry and find out critical problems which are the main barriers against its efficiency and potential competitiveness. And then, we develop the collaborative structure to resolve these problems through the system design of supply chain and finally we suggest the c-SCM business model consists of several collaborative process modules for the Korean footwear industry. The procedure of this system modelling follows the system design methodology with the empirical way through field trips of the relevant industry and depth interviews with practitioners as well as with analytical way. The proposed c-SCM business model provides the collaborative procurement and production plans of footwear manufacturing, and it will support a mutual-supplementary reliance relationships among members of its supply chain. In this way, the enhancement of the efficiency and competitiveness can be expected through the synergy effect of coordination of information and material flow, the reduction of lead times, and production costs.

건축물 외장벽돌 박락사고의 원인과 대책

현승용 ( Hyun Seung-yong ),한천구 ( Han Cheon-goo ) 한국구조물진단유지관리공학회 2019 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.23 No.2

본 논문에서는 건물 외장벽돌의 박락사고와 관련하여 박락의 응력 원인 및 방지대책 등에 고찰 및 제안하였다. 즉, 설계자는 건축물 시공전 설계도면 및 시방서를 철저히 검토하여 건조수축 및 온도 변화에 따른 팽창수축 등 거동에 무리가 없는지, 또한 연결철물도 단단히 고정되게 되어있는지를 검토하고, 시공과정에서 시공 및 감리자는 철저히 확인 및 감독할 필요가 있는 것이다.

효과적 ERP 활용을 위한 조선기자재업체의 영업부문 프로세스 재설계에 관한 연구

현승용(Hyun, Seung Yong),최병권(Choi, Byung Kwon) 동아대학교 경영문제연구소 2013 經營論叢 Vol.34 No.-

As the speedy change of business environment, the Korean shipbuilding equipments industry is practicing the manufacturing innovation with the new technology for the global competitiveness. Adoption of ERP in this industry is the one of the cases. Although the industry is eager to grab the edge of the competitiveness, the implementation of this new technology shows the poor performance often. It is due to the operational gap between the characteristics of shipbuilding equipments industry and the built in standardization process in ERP system. The shipbuilding equipments industry does mainly OEM business with shipbuilders, in fact, its process is under lots of volatile conditions, such as non standard items, customer order changes, and due date changes, etc. Without fine tuning and practical adjustment, the process in standard ERP system will not work properly and its performance is to be very limited. This research analyzes the mis-implementation of the ERP in a shipbuilding equipments company and shows the redesign details for the effective ERP performance, along with as-is, to-be BPR process focusing on sales process.

Fluid Control 자재 생산라인에 TOC/DBR을 적용한 프로세스 개선

현승용(Hyun, Seung Yong),박혁준(Park, Hyuk Jun) 동아대학교 경영문제연구소 2013 經營論叢 Vol.34 No.-

Fluid Control materials which control the flow of fluid and gas and play a role in connecting pipelines are a kind of a machine part used in diverse sectors such as shipbuilding, construction and car industry. As Fluid Control materials industry which has rapidly grown as of 2012, S company this study conducted is best-known, constructs unequaled field. But the part of production process needs to be reformed as the side effect caused by the rapid growth. This study examines the ways to reform the production process by using TOC/DBR. In the whole process of production demand, cut and T/C, the problems found in each process were improved and T/C process was recognized as the most restricted process during this process. As a result, the utilization of machine equipment becomes more efficient and the due-date performance is improved.

TPS를 응용한 주조업체의 경영개선 활동에 관한 연구

현승용(Hyun Seung Yong),박성만(Park Sung Man) 동아대학교 경영문제연구소 2011 經營論叢 Vol.32 No.-

This study deals with the practicability and implemental issues of TPS(Toyota Production System) for casting industry. We review the basic concept TPS based on JIT(Just-In-Time) philosophy and introduce the various applying tools of TPS into practice. We also discuss and compare the difference between the theoretical base and the implemental concerns of TPS. The empirical case is conducted with adaptation of TPS for improvement of management in the medium sized casting company. The managerial performance is discussed and the problem issues during TPS application and the suggestions are also provided in the final chapter.

한국 자동차 부품산업의 경쟁력 향상이 수출에 미치는 영향

현승용(Hyun Seung yong),백인아(Beak in Ah),황수진(Hwang Su JIn) 동아대학교 경영문제연구소 2007 經營論叢 Vol.28 No.-

The FTA between Korea and the U.S. is expected to bring the growth of Korean Automobile part industry. Although the Korean Automobile part companies are keeping on making efforts to improve their competitive edge, the most previous Studies of Automobile industry have been focusing on national or industrial competitiveness in the final assembly sectors, i, e. Automobile makers, In this study, we try to focus on Automobile part companies in order to find the factors" influences on their international competitiveness. For this purpose, this study makes a related literature review and then we make a questionnaire survey for the Korean Automobile part companies, those are manufacturing the 1st tier auto parts, Also the statistical analysis is followed to find determinants of the significant factors in the international competitiveness of Korean Automobile part companies. The study shows that the international competitiveness of these companies is depending on their performances in price, quality technology and service, but the influence of each factor is in difference.

경쟁우위전략이 환경경영활동과 경영성과에 미치는 영향에 관한 연구

현승용(Hyun, Seung Yong),박상일(Park, Sang Il) 동아대학교 경영문제연구소 2010 經營論叢 Vol.31 No.-

As the global competition becomes fierce and the environmental regulations are enforced along with the change in global competitive edges, the korean companies are facing with the problems of how to achieve the global strategic advantages. In this process of securing competitive advantages, all industries have a close relationship with their environment. As environmental issues have emerged as important consideration in these days, the most enterprises have to envolve into the environmental managemental approach for the environmental protection regulated, simultaneously along with the traditional management practices for only economic profitability. This study aims to identify the influent factors and to analyse the interactive relationships among the environment management, the managerial performance and the competitive advantage strategies(cost advantage and differentiation advantage). The statistical analysis is conducted through multiplicative regression models using SPSS 14.0 and the relevant results are discussed.