http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
기생 인덕턴스를 고려한 항공기 탑재장비의 간접낙뢰 보호회로 설계
심용기,조성진,김성훈,박준현,한종표,Sim, Yong-gi,Cho, Seong-jin,Kim, Sung-hun,Park, Jun-hyun,Han, Jong-pyo 한국항행학회 2017 韓國航行學會論文誌 Vol.21 No.5
본 논문에서는 간접낙뢰로 인한 항공기 탑재 장비의 손상을 방지하기 위한 간접낙뢰 보호회로의 설계시 고려해야 하는 사항들을 설명한다. 낙뢰로부터 유도된 서지 전압은 항공기 전기 전자장비의 기능 장애나 손상을 가져오는데 이것을 낙뢰의 간접영향이라 한다. 이러한 항공기의 낙뢰 간접영향으로부터 항공전자 장비를 보호하기 위해서는 항공기에 가해진 낙뢰로 인한 영향성을 분석하고 이에 따른 보호 설계를 각각의 장비에 적용한다. 설계된 간접낙뢰 보호회로는 PCB와 TVS다이오드에 기생하는 인덕턴스로 인해 의도치 않은 결과를 가져올 수 있다. 본 논문에서는 간접낙뢰 보호회로를 구성하는 요소들에 기생하는 인덕턴스를 고려한 보호회로 설계 방법을 소개한다. 또한 설계된 보호회로의 유효성 확인을 위해 수행한 낙뢰 간접영향 검증시험 결과를 보인다. In this paper, we introduce the design consideration of the lightning induced transient protection circuit for the indirect lightning strike on the avionics equipment. The lightning induced surge voltage, which is so-called as indirect effects of lightning, may cause a functional failure or physical damage to the electrical and electronic equipment of aircraft. In order to protect the electrical and electronic equipment of aircraft from the indirect effects of lightning, we should analyze the effect of lightning strike on aircraft and consider applying protection design for each avionics device. However, lightning induced transient protection circuits can have unintended consequences because parasitic inductance elements are exist in PCB and TVS diodes. In this paper, we introduce the design method of the protection circuit considering the parasitic inductance of the protection circuit. In addition, we show the result of verification test performed to validate the protection circuits for indirect effects of lightning.
CAE를 이용한 항공용 장비 장착대의 구조 안전성 해석
이강욱(Kangwook Lee),한종표(Han Jong Pyo),변진구(Byun JinKu),김원현(Wonhyun Kim),최지호(Ji-Ho Choi) 대한기계학회 2010 대한기계학회 춘추학술대회 Vol.2010 No.11
Some aerospace equipment use the mount tray for convenience of installation or uninstallation to the aerospace vehicle. In the aerospace vehicle, the weight is the most important factor to design the vehicle. Because, it has an influence on fuel, and that go into effect at cost. So, the mount tray is required to have not only strength, stiffness but also light weight. In this study, an analysis method of mount tray using finite element model(FEM) has been presented. Using this FEM, Vibration analysis and Acceleration analysis are conducted to confirm the structural safety. Structural analysis and material study were performed on mount tray. The finite element analysis(FEA) were performed with NASTRAN and the solid models were generated with IDEAS.
NEXUS를 이용한 비행안전 필수 소프트웨어 검증환경 개발
윤형식(Hyung-Sik Yoon),한종표(Jong-Pyo Han) 한국항공우주학회 2012 韓國航空宇宙學會誌 Vol.40 No.6
항공기 비행조종컴퓨터 탑재 소프트웨어는 항공기의 손실뿐만 아니라 조종사의 생명에도 직결되는 비행안전 필수 소프트웨어로서 정확성과 무결성을 입증하기 위한 검증 및 확인(Verification & Validation)이 요구된다. 특히 비행안전 필수 소프트웨어는 검증을 위해 통합시험 단계에서 실제 환경과 유사한 운용 환경에 노출하여 소프트웨어 내부 상태를 실시간으로 모니터링하기 위한 환경이 요구된다. 본 논문에서는 표준 디버깅 인터페이스인 NEXUS 5001을 이용한 비행안전 필수 소프트웨어의 검증환경 개발에 대하여 기술하였다. Verification and validation of operational software of the flight control computer, which is flight safety critical, is very important to prove correctness and faultness of the software. To verify the real-time softare requirement on operational software of flight control computer, real-time software internal parameter and variable monitoring technics on hardware-in-the-loop environment, similar to on-flight environment, is required. This paper describes flight safety critical software validation and verificiation environment using standard debugging interface, NEXUS 5001.
항공 통신 기술 : 항공기 탑재 컴퓨터용 간접낙뢰 보호장치 개발 및 검증
심용기 ( Yong Gi Sim ),안태식 ( Tae Sik Ahn ),박준현 ( Jun Hyun Park ),한종표 ( Jong Pyo Han ),양서희 ( Seo Hee Yang ) 한국항행학회 2015 韓國航行學會論文誌 Vol.19 No.5
본 논문에서는 간접낙뢰로 인한 항공기 탑재 컴퓨터의 손상을 보호하기 위한 간접낙뢰 보호장치의 설계 내용 및 시험 과정을 소개한다. 낙뢰로부터 유도된 서지 전압은 항공기 전기.전자장비의 기능 장애나 손상을 가져오는데 이것을 낙뢰의 간접영향이라 한다. 이러한 항공기의 낙뢰 간접영향으로부터 항공전자 장비를 보호하기 위해서는 항공기에 가해진 낙뢰로 인한 영향성을 분석하고 이에 따른 보호 설계를 각각의 장비에 적용한다. 본 논문에서는 보호대상 장비의 간접낙뢰로 인한 손상을 방지하기 위하여 수행한 RTCA DO-160G Section22의 카테고리 분석과 선정을 통한 간접낙뢰 수준 결정, 선정된 레벨에 따른 보호회로 설계 방법을 소개한다. 또한 설계된 보호회로의 유효성 확인을 위해 수행한 낙뢰 간접영향 검증시험 결과를 보인다. This paper introduces the design details and test procedures of the lightning induced transient protection device for protecting the damage caused by indirect lightning strike on the computer mounted on the aircraft. Lightning induced surge voltage is bring a malfunction or damage to the aircraft electrical and electronic equipment, that is referred to indirect effects of lightning. In order to protect the electronic equipment on aircraft from the indirect effects of lightning, that is achieved by analyzing the effect on aircraft from lightning and protect design for each devices. In this paper, we introduce an indirect lightning strike level decisions, the protection circuit design method according to the chosen level through the RTCA DO-160G Section 22 category analysis and selection was performed in order to protect the damage caused by indirect lightning strikes in the protected equipment. In addition, we show the indirect lightning effects verification test performed to validate the designed protection circuits.