http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Inverse Chromatography를 이용한 질소, 이산화탄소, 메탄, 그리고 일산화탄소의 활성탄에 대한 흡착 등온선 계산
추고연,한재찬,박종기 한국공업화학회 2019 한국공업화학회 연구논문 초록집 Vol.2019 No.1
활성탄(12 ~ 20 mesh, 유림탄소)을 충진한 내경 4.57 mm, 길이 200 mm의 칼럼을 GC의 오븐에 장착하고 30 ~ 60°C의 온도 범위에서 질소, 이산화탄소, 메탄, 그리고 일산화탄소를 각각 0.25 ~ 5.0 cm3 범위 내에서 주입하여 크로마토그램을 얻었다. GC 칼럼의 동적 거동을 모델링하고 이를 이용하여 실험으로 얻어진 크로마토그램을 해석하였으며 크로마토그램을 가장 잘 해석할 수 있는 Langmuir Isotherm 모델의 매개변수를 회귀분석하였다.
김성윤,정연호,한재찬,최원석,Kim, Sung Yun,Joung, Yeun-Ho,Han, Jae Chan,Choi, Won Seok 한국전기전자재료학회 2013 전기전자재료학회논문지 Vol.26 No.9
The carbon nanowall (CNW) is a carbon-based nanomaterials and it was constructed with vertical structure graphenes and it has the highest surface density among carbon-based nanostructures. In this study, we have checked the growth properties of CNW according to the substrate angle. Microwave plasma enhanced chemical vapor deposition (PECVD) system was used to grow CNW on Si substrate with methane ($CH_4$) and hydrogen ($H_2$) gases. And, we have changed the substrate angle from $0^{\circ}$ to $90^{\circ}$ in steps of $30^{\circ}$. The planar and vertical conditions of the grown CNWs according to the substrate angle were characterized by a field emission scanning electron microscopy (FE-SEM) and energy dispersive spectroscopy (EDS). In case of the growth angle increases, our experimental results showed that the length of the CNW was shortened and the content of carbon component was decreased.
바이어스 인가 방식에 의한 컬러 화강석 제조에 관한 연구
박종국,신홍직,최원석,한재찬,Park, Jong Kug,Shin, Hong-Jik,Choi, Won Seok,Han, Jae Chan 한국전기전자재료학회 2016 전기전자재료학회논문지 Vol.29 No.4
In this study, we investigated the color change of the normal light gray granite as the high value color granite. By coating the metal catalyst liquid on the surface of granite stone, the metal particles were penetrated into the granite and the color of granite was changed permanently through the annealing treatment. To increase penetration depth into the granite, we used DC (direct current) bias. Two kinds of bias were used such as DC bias and pulse DC bias. And the penetration time was changed as 30 and 60 min. In all cases, the color granite were successfully obtained. Regardless of the catalyst reaction time, the penetration depth was increased by using the bias treatment. We obtained a penetration depth of 21 mm with the DC pulse bias during 60 min.
수증기 개질 반응기의 효율 향상을 위한 버너 구조 연구
성봉현(Sung, Bong-Hyun),한재찬(Han, Jae-Chan),신장식(Shin, Jang-Sik),이승영(Lee, Seung-Young),양혜경(Yang, Hye-Kyong),신석재(Shin, Seok-Jae),박종원(Park, Jong-Won),김두훈(Kim, Doo-Hoon) 한국신재생에너지학회 2007 한국신재생에너지학회 학술대회논문집 Vol.2007 No.06
가정용 연료전지 수소 공급용 연료변환 장치는 LNG, LPG를 이용하여 수소를 제조하는 수증기 개질과 제조된 합성가스의 정제공정으로 저온/고온 전이 반응 및 선택적 산화 반응을 포함하게 된다. 이중 전체 연료변환 장치 효율은 공정중의 유일한 흡열 반응인 수증기 개질 반응기 구조와 반응열 공급용 버너에 의해 결정된다. 반응열 공급용 버너의 형식, 구조 등의 변수를 통해 본 연구진에 의해 개발된 반응구조의 최적 열원 공급 방식을 산출하고자 하였다. 이를 위하여 본 연구에서는 원통형 개질 반응기에 적용 가능한 버너의 구조, 토출 각도, 토출구의 수 등의 버너 설계 변수가 버너의 성능의 미치는 영향에 대하여 연구하였다. 연구에 사용된 버너는 적용 연료의 혼합 특성을 증가시키기 위해 혼합공간을 충분히 유지 하였으며, 버너의 구조와 연소용 기체의 토출각 및 토출구의 위치 변화를 통한 불꽃의 형태를 변화 시켜 반응기 내의 온도 분포 특성을 비교 분석하였으며, 분석 결과에 의해 원통형 개질 반응기에서 최대 효율을 가지는 버너의 구조로부터 수증기 개질 반응을 평가하였다.