http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
추연욱,김동수,Choo Yun-Wook,Kim Dong-Soo 한국지반공학회 2005 한국지반공학회논문집 Vol.21 No.3
본 논문에서는 포화 및 배수 조건에 따른 사질토 지반의 변형특성을 개선된 Stokoe식 비틂전단시험기를 이용하여 비교$\cdot$관찰하였다. 기존의 Stokoe식 비틀 전단 시험기를 개선하여 시료의 완전 포화상태를 만들고, 포화 배수 및 비배수 조건에서 비틂 전단 시험이 가능하도록 하였고, 또한, 비배수 시험에서 간극수압을 동시에 측정할 수 있도록 하였다. 국내에서 채취된 금강모래와 일본의 토요라 모래를 사용하여, 건조, 포화 배수 및 포화 비배수 조건, 3가지 간극비, 4가지 구속응력 조건을 달리하여 비틂전단시험을 수행하였다. 시험결과를 바탕으로, 전단탄성계수와 재료 감쇠비를 각 조건에 대하여 반복하중 및 변형률 크기의 영향을 비교$\cdot$분석하고, 배수 조건에 따라 다르게 나타나는 사질토 지반의 저변형률 (c) 및 중간 변형률 (${10}^{-3}\%<\gamma_c<{10}^{-1}\%$)에서의 변형특성을 관찰하였다. In this study, dynamic deformation characteristics of sands under dry, saturated drained and undrained conditions were investigated at small to intermediate strains using the modified Stokoe-type torsional shear tests. The equipment was modified to saturate the specimen and to maintain the B-value above 0.99 during the test. On two types of sands, Geumgang sand from Korea and Toyoura sand from Japan, tests were carried out at various drainage conditions, void ratios, and effective confining pressures. Based on the test results, dynamic deformation characteristics, shear modulus (G) and damping ratio (D), and/or pore-water pressure were measured with strain amplitude and number of loading cycles. Variations of G and D at small ($\gamma_c<{10}^{-3}\%$) to medium (${10}^{-3}\%<\gamma_c<{10}^{-1}\%$) strains were measured under various drainage conditions, and test results were intensively compared considering drainage conditions.
조밀한 모래지반에 설치된 해상풍력 석션기초의 스커트길이에 따른 지진하중시 거동특성
추연욱(Yun Wook Choo),Leonardo Olalo,배경태(Kyung-Tae Bae) 한국해안해양공학회 2016 한국해안해양공학회 논문집 Vol.28 No.4
본 연구는 해상풍력지지구조물로 적용되는 석션기초의 지진하중에 대한 동적거동 분석을 목적으로 하였다. 이를 위하여 동적원심모형실험을 수행하였다. 석션기초의 스커트길이는 외력에 대한 지지거동에 중요한 역할을 한다. 스커트길이/석션기초외경 비가 0.5, 0.75, 1의 3가지 석션기초 모형이 조밀한 모래지반에 설치된 경우에 대하여 동적원심모형실험 결과를 제시하였다. 실험결과로 스커트길이에 따른 석션기초에서의 가속도증폭특성, 잔류침하량, 잔류회전각을 비교하였다. This study aims to analyze seismic responses of suction foundations for offshore wind turbine. For this purpose, dynamic centrifuge model tests were carried out. The skirt length of the suction foundation is a critical element for bearing mechanism against environmental loads. Thus, dynamic centrifuge model tests were performed and analyzed for three suction foundation models with the ratios of skirt length to suction foundation diameter of 0.5, 0.75, and 1 installed in dense sand. As results, the acceleration amplification at the suction foundation, residual settlement, and residual tilting angle were compared.
추연욱(Choo Yun Wook),조성은(Cho Sung Eun),신동훈(Shin Dong Hoon) 대한토목학회 2012 대한토목학회논문집 C Vol.32 No.2
본 연구에서는 필댐을 위한 모니터링 기술에 적용할 수 있는 물리량으로 간극수압, 온도와 전기저항을 선정하였고, 이를 원심모형시험 상에서 계측할 수 있는 시스템을 구축하였다. 또한 코아형 필댑 모형 단면을 설계하고, 코아죤에 취약부가 없는 정상적인 경우, 코아죤 하부에 부분적인 위약부가 발생한 경우, 코아죤 하부에 취약부가 커져서 상하류 사력죤이 연결되는 경우를 포함하여, 총 세가지 모형을 제작하고, 원심모형시험을 수행하였다. 원심력장이 작용하는 조건에서, 담수시에 나타나는 침추 흐름의 변화에 따라 간극수압, 온도 및 전기저항의 변화를 모니터링하였다. 원심모형시험을 통하여, 간극수압, 온도 및 전기저항의 변화가 취앾ㄱ부 존재에 따라 다르게 나타나는 것을 확인 할 수 있었고, 간극수압, 온도와 전기 저항이 필댐의 내부 취약부를 탐지하기 위한 모니터링 기술 개발에 적용될 수 있음을 확인하였다. In this study, three centrifuge tests were performed to evaluate the feasibility of three physical quantities for detecting internal defect of earth core fill dam: pore water pressure, temperature, and electrical resistance. For this purpose, the measurement system for pore water pressure, temperature and electrical resistance on centrifuge model dams was established. Three centrifuge tests included a fill dam without internal defect and two other dams with artificial internal defect in the core. The effectiveness of seepage monitoring was examined during the centrifuge test. Test results showed the applicability of monitoring techniques to detect internal defect by monitoring pore water pressure, temperature, and electrical resistance.
FSRU 계류선의 지반 정착을 위한 석션 앵커의 수평 하중 지지력 산정기법 연구
김수린(Su-Rin Kim),추연욱(Yun-Wook Choo),김동수(Dong-Soo Kim) 대한조선학회 2011 대한조선학회 학술대회자료집 Vol.2011 No.6
석션 앵커는 내외부의 압력차를 이용하여 지중에 설치하는 기초 형식으로, 앵커의 크기 및 설치 수심에 제약을 받지 않는다. 이러한 이점은 다양한 해양구조물에 적용되며, FSRU 계류선의 지반정착부로 적극 활용될 수 있다. FSRU의 계류를 위해 석션 앵커가 사용될 때, Catenary 형식의 경우 수평하중이 지배적인 요소가 되므로, 본 연구에서는 수평하중에 의한 지지력산정 및 석션 앵커의 거동 분석을 목표로 하였다. 점성토 지반에 정착된 석션 앵커의 수평하중에 대한 지지력을A ubeny 등에 의해 제안된 간편법을 적용하여 검토하였다. 또한 이론적인 지지력을 상용 FEM 해석 시뮬레이션 결과와 비교하여, 수평 방향 지지력 거동을 분석하였다.
PVD 설치 및 지반교란의 분석을 위한 2차원 모형실험 시스템
김재현(Kim Jae Hyun),추연욱(Choo Yun Wook),박현일(Park Hyun-Il),김동수(Kim Dong-Soo) 대한토목학회 2012 대한토목학회논문집 C Vol.32 No.4
본 논문에서는 PVD의 설치를 위하여 사용되는 앵커슈에 의한 지반교란과 정착 메커니즘을 연구하기 위하여, 맨드렐-앵커슈의 관입과정과 인발과정을 모사하고, 시각화 할 수 있는 2차원 모형실험 시스템을 개발하였다. 개발된 시스템을 활용하여, 기존 사각판형 앵커슈와 쐐기가 달린 비대칭 앵커슈의 관입과 인발 과정을 모사하는 1g 모형실험과 원심모형실험을 수행하였다. 앵커슈 크기 및 종류에 따라 지반교란과 앵커슈 정착 성능을 확인하기 위해 크기가 다른 기존 사각판형 앵커슈와 쐐기형 비대칭 앵커슈의 설치과정을 모사하였다. 관입과정에서 촬영된 영상을 이미지 분석하여, 앵커슈의 크기 및 형태에 따른 점토의 교란을 시각화하고 분석하였다. 또한 인발과정 모사를 통하여 앵커슈의 정착 메커니즘을 밝히고 인발시 정착력을 측정하여 정착 성능을 비교하였다. 그 결과, 앵커슈의 크기는 지반교란과 인발저항력 모두에 영향을 미치며, 비대칭 앵커슈가 기존의 앵커슈에 비해 지반교란 및 배수재 정착 성능을 향상시키는 것을 확인하였다. In order to investigate the soil disturbance induced by anchor-shoe for PYD installation and the anchoring mechanism, a new two dimensional testing system was developed. By using the developed testing system, 1g and centrifuge model tests were performed, simulating the driving-retrieval process of both conventional symmetric anchor shoe and new asymmetric anchor shoe. Various size anchor-shoes were simulated and the results were compared. The images recorded during the installation were analyzed by image processing technique. The results of the image analysis presented the clay disturbance depending on the size and type of anchor shoe. In addition, from the retrieval process, the anchoring mechanism was revealed and the holding capacity was measured. As results, the size of anchor shoe influences the soil disturbance and holding capacity. The new asymmetric anchor shoe reduces the soil disturbance and improves anchoring performance.