http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
모델 및 구성품 기반 초음속 추진기관 실시간 모델링 및 시뮬레이션
최종호(J. H. Choi),박익수(I. S. Park),이재윤(J. Y. Lee),김중회(J. H. Kim),김익수(I. S. Kim),윤현걸(H. G. Yoon),임진식(J. S. Lim),김철배(C. B. Kim),박재만(J. M. Park) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.11
램제트 및 스크램제트와 같은 공기흡입식 추진기관의 구성품 기반 모델 및 추진시스템 시뮬레이션에 대해 연구하였다. 시뮬레이션 모델은 엔진제어기 및 연료공급 시스템을 포함하여 공기흡입구, 연소기, 노즐 등으로 구성된 공기흡입식 추진기관의 특성을 고려하여 각각의 구성품을 종합한 모델로 구현하였다. 엔진의 성능 및 제어기의 동작 특성을 검증하기 위해 실제 환경을 모사하여 실시간 기반 Hardware In the Loop System(HILS)을 구현하였다. The component based propulsion modeling and simulation of an air-breathing engine such as ramjet and scramjet is studied. The simulation model has been realized considering the characteristics of the air-breathing engine which is composed of air intake, combustor and nozzle including engine controller and fuel supply system. To estimate the engine performance and to verify the engine controller, real time based Hardware in the Loop System simulating actual environment is constructed.
최종호(J.H. Choi),이재윤(J.Y. Lee),윤현걸(H.G. Yoon),임진식(J.S. Lim) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.5
초기 설계단계에서 세 개의 전압력센서와 두 개의 정압력센서로 구성된 압력획득 장치를 이용하여 초고속 유동 상태에서 공력 데이터 산출 알고리즘 개발에 대하여 기술하였다. 개발 알고리즘으로부터 마하수, 받음각 및 사이드슬립각을 미리 정의된 테이블 데이터 및 내삽법(interpolation)을 적용하여 손쉽게 얻을 수 있다. 초기 설계 단계에서 개발 프로그램을 검증하기 위해 사용된 테이블 데이터는 Taylor-Maccoll 관계식으로부터 획득한 자료로 구성하였다. 또한 데이터는 CFD 해석에 기초한 계산결과와 비교 및 수정되었다. 금번에 제시된 알고리즘은 다양한 항공기 와 시험에 필요한 초음속 유동데이터 획득에 유용하게 적용될 것으로 기대된다. An air data acquisition algorithm has been developed for the supersonic flow at the preliminary design stage with pressure data acquisition device composed of major three total pressure sensors and two static pressure sensors. Through this algorithm, Mach number, angle of attack and sideslip angle can be very easily derived with simple interpolation algorithm and predefined data tables. In this preliminary design stage, to verify the developed algorithm, the data tables are constructed with data driven by Taylor Maccoll equation. Furthermore, these data are compared and modified with computational results based on CFD analysis. The present algorithm would be useful to get supersonic air data for the various aerial vehicles and their flight tests.
최종호(J. H. Choi),박익수(I. S. Park),길현용(H. Y. Gill),황기영(G. Y. Hwang) 한국추진공학회 2012 한국추진공학회 학술대회논문집 Vol.2012 No.11
Taylor-Maccoll 유동관계식과 준평형 1차원 모델을 적용한 구성품 기반의 이중램제트 추진기관 모델 개발에 대해 기술하였다. 이중램제트 흡입구는 Taylor Maccoll 유동관계식을 적용하여 콘 각도 25° 형상을 갖는 흡입구에 대해 아음속 및 초음속 흡입구 모델을 구현하였으며 예 연소가스를 초음속 연소기로 전달하는 기능의 가스발생기는 Lumped 모델을 적용하여 모델을 구현하였고 요구되는 노즐목 크기에 대해 기술하였다. 초음속 연소기의 경우 준평형 1차원 모델을 적용하여 위치에 따른 마하수 변화, 온도변화 및 압력변화 등을 제시하였다. 또한 금번 모델을 이용하여 당량비 및 압력회복율을 고려한 연료량 조절모델에 따른 추력과 비추력을 계산하여 그 결과를 제시하였다. The component based propulsion modeling and simulation of an dual ramjet engine using Taylor-Maccoll flow equation and quasi 1-D combustor model. The subsonic and supersonic intake were modeled with Taylor-Maccoll flow having 25° cone angle, the gas generator which transfers a pre-combustion gas into supersonic combustor was developed using Lumped model, and the determination of the size of nozzle throat of a gas generator was described. A quasi 1-D model was applied to model a supersonic combustor and the variation of temperature and pressure inside combustor were presented. Furthermore, the thrust and specific impulse applying fuel regulation by pressure recovery ratio and equivalence ratio were derived.
강재훈(J. H. Kang),최종호(J. H. Choi),이성휘(S. H. Lee) 한국생산제조학회 2010 한국공작기계학회 추계학술대회논문집 Vol.2010 No.-
Drilling machining technology used widely in manufacturing industry is regarded as one of important mechanical cutting methods to make holes. Recently, tungsten carbide alloy with excellent mechanical properties is substituted for major material of drill tool to cope with difficult to machine material and advanced new material. Drilling machining experiment using tungsten carbide alloy solid type drill tool was accomplished to measure cutting forces for comparison of quantitative cutting characteristic evaluation.