RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
        • 주제분류
        • 발행연도
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        기존말뚝과 보강말뚝의 하중분담 특성에 관한 실험적 연구

        조성훈(Seonghun Cho),최기선(Kisun Choi),조삼덕(Samdeok Cho),유영찬(Youngchan You),최창호(Changho Choi) 한국지반환경공학회 2014 한국지반환경공학회논문집 Vol.15 No.12

        최근 공동주택 수직증축 리모델링 사업 등 기초구조물을 보강하기 위한 기술적 수요가 증가하고 있다. 본 논문에서는 기존 구조물을 지지하는 기존말뚝에 보강말뚝을 추가로 설치할 경우 추가하중에 의한 기존말뚝과 보강말뚝의 하중분담 특성을 연구하였다. 정사각형의 기초판에 설치된 기존말뚝 4본에 허용하중을 재하한 후, 기초판 중앙에 보강말뚝 1본을 추가로 설치하고 추가하중을 재하하였다. 실험결과로부터 기존말뚝에 재하되는 하중이 허용지지력을 초과한 이후에 기존말뚝과 보강말뚝이 하중을 균등하게 분담하는 것으로 분석되었다. 기존말뚝에 허용하중 재하 후, 허용하중 대비 60 %, 80 %, 100 %까지 제하(unloading)하고, 보강말뚝을 설치한 후 추가하중을 재재하(reloading)하는 실험을 수행하였다. 연구 결과 제하 하중의 양이 증가함에 따라 재재하 시 기존말뚝과 보강말뚝이 하중을 균등하게 분담하는 재재하 하중이 감소하는 경향을 파악하였다. Recently, there are increasing technical needs for foundation retrofit project such as vertical extension of apartment building. This paper focuses on the load distribution characteristics of existing and reinforcing piles when reinforcing pile is installed to the existing foundation. Allowable bearing load was initially applied on the foundation slab supported with four existing piles and then, one reinforcing pile was installed at the center of foundation slab and additional load was applied. The experimental results showed the Load Distribution Ratio (LDR) between existing and reinforcing piles converged after the applied load exceeded allowable bearing capacity of all piles. Laboratory tests were also performed for the cases of 60 %, 80 %, 100 % unloading level of allowable bearing load. After unloading step, one reinforcing pile was installed at the center of foundation slab and additional load was applied. The results showed that reloading load level at which LDR between existing and reinforcing piles converged decreased as the amount of unloading load increased.

      • 실물 동적 실험을 통한 기존 RC 모멘트 골조에 대한 FRP 재킷시스템의 보강효과

        신지욱 ( Shin Jiuk ),유영찬 ( You Young-chan ),최기선 ( Choi Kisun ),김민선 ( Kim Minsun ),이현지 ( Lee Hyunjee ) 한국구조물진단유지관리공학회 2019 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.23 No.1

        This research presents effectiveness of fiber-reinforced polymer column jacketing system for a non-ductile reinforced concrete building frame constructed before the 1970s. To investigate the retrofit effects, a series of full-scale dynamic tests for the retrofitted test frame was conducted, and the dynamic responses were compared to those of the non-retrofitted test frame. The effectiveness of the retrofit system was investigated in terms of response reductions, damage mechanisms and drift concentration factors.

      • 열차로 인해 발생한 진동에 대해 효과적인 방진공법 개발

        이동근 ( Lee Dongkeun ),유영찬 ( You Young-chan ),최기선 ( Choi Kisun ) 한국구조물진단유지관리공학회 2019 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.23 No.2

        대중교통이 편리하고 기반시설을 갖추고 있는 곳들의 주택 및 아파트 값은 비싼 편이어서 경제적으로 취약한 계층에 있는 사람들이 거주하기에 힘든 것이 현실이다. 경제적으로 취약한 계층을 위해 철도 주변의 유휴 부지를 활용하여 비교적 저렴한 가격의 건축물을 공급할 수 있다. 이 경우에, 열차로 인한 진동을 효과적으로 제어해야 되는 문제가 있다. 이미 궤도 방진, 방진벽 설치, 면진 장치 설치, 기초 방진 등의 진동제어 공법들이 있지만, 각 공법마다 단점들이 있다. 때문에, 본 연구에 전이층 중간과 기초 중간에 방진재를 삽입하는 진동제어 일체형 구조시스템을 개발하였으며, 방진 시스템별 단위블록 실험, 구조체 실험, 유한요소해석을 통하여 진동제어 일체형 구조시스템이 기존 공법들과 비교하여 우수함을 증명하였다.

      • KCI등재

        연동비닐하우스 기초의 회전저항성능 평가에 관한 실험적 연구

        이현지(Hyunjee Lee),신지욱(Jiuk Shin),김민선(Minsun Kim),최기선(Kisun Choi) 한국지반환경공학회 2018 한국지반환경공학회논문집 Vol.19 No.9

        연동비닐하우스의 기초는 주로 수직하중을 고려하여 소형의 얕은 콘크리트 기초로 설계 시공된다. 그러나 최근 강풍과 같은 이상기후로 인하여 기초에 설계 강도 이상의 수평하중 및 인발하중이 작용하여 온실기초의 안전성 문제를 야기하고 있다. 비닐하우스 기초의 안전성을 합리적으로 평가하기 위해 지반-기초의 상호작용에 의해 발현되는 회전 및 인발강성을 평가하여야 하며 이는 상부 구조재의 안전성에도 영향을 미치는 요소가 된다. 본 연구에서는 내재해형 연동비닐하우스 규격 기초를 형상에 따라 분류하여 3개의 대표 기초 유형을 선정하고, 기초 유형별 수평하중 가력실험 및 이론 해석을 수행하였다. 실험 및 해석의 비교 · 분석 결과, 기초-지반 접촉면의 성질과 지반의 역학적 성질이 동일할 경우 기초는 지반과의 접촉면적비에 따라 회전저항성능에 차이를 보이는 것으로 나타났다. The foundation of the multi-span greenhouse structures is designed with small shallow concrete foundation considering mainly the vertical load. However, recently, due to an abnormal climate such as strong wind, horizontal load and up-lift load over design strength are applied to the foundation, causing safety problems of the greenhouse foundation. In order to reasonably evaluate the safety of greenhouse foundations, rotational and pullout stiffness expressed by the ground-foundation interaction should be evaluated, which also affects the safety of the upper structural members. In this study, three representative basic foundation types were selected by classifying greenhouse standards in Korea according to the shape, and the horizontal loading tests and theoretical calculation were performed for each foundation type. As a result of the comparison and analysis of the test and calculation, it was found that rotational resistance of the foundation is different according to the ratio of the contact area between the foundation and ground when the conditions of the foundation - ground contact surface and the mechanical properties of the ground are the same.

      • KCI등재

        준불연 외단열시스템의 역학적 특성에 관한 연구

        최기선 ( Choi¸ Ki-sun ),하수경 ( Ha¸ Soo-kyung ),오근영 ( Oh¸ Keun-yeong ),박금성 ( Park¸ Keum-sung ),류화성 ( Ryu¸ Hwa-sung ) 한국건축시공학회 2021 한국건축시공학회지 Vol.21 No.5

        외단열시스템에서 준불연 성능을 확보한 부착식 탄산칼슘계 복합단열판은 효과적인 단열성능과 화재안전성을 강화한 것으로, 본 연구에서는 준불연 복합단열판을 대상으로 부착식 준불연 외단열시스템의 구조설계 기초데이터를 확보하기 위하여 복합단열판 및 구성재의 역학적 시험을 수행하였다. 국내외 시험규격을 참조하여 시험체를 제작하였으며, 인장강도, 압축강도, 굴곡강도, 전단강도를 시험 평가하였다. 시험결과로부터 준불연 복합단열판의 강도특성치를 도출하였고, 현행 KS M ISO 4898에서 제시하는 최소 요구물성을 확보하고 있는 것을 검증하였다. 또한, 본 연구에서 사용한 준불연 외단열시스템은 지속적 중량 하중을 받지 않는 벽체의 외단열시스템으로 사용이 가능한 것을 확인하였다. The application of an adhesive calcium carbonate-based hybrid insulation board with quasi-combustibility in the external thermal insulation composite system(ETICS) ensures effective thermal performance and fire safety. This study aimed to conduct a mechanical test of the quasi-non-combustible hybrid insulation board as well as its constituent materials to obtain the basic data for the structural design of the adhesive ETICS. Test specimens were fabricated based on domestic and foreign test standards to examine and evaluate their tensile, compressive, flexural, and shear strengths. The strength characteristics of the quasi-non-combustible hybrid insulation board were identified from the test results, which verified that the minimum required physical properties suggested by the current KS M ISO 4898 were met. Furthermore, the quasi-non-combustible ETICS used in this study was found to be suitable for use as an external insulation system for walls unless subjected to continuous gravity load, such as a heavy exterior finish.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼