http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
헬기의 기동조건을 고려한 포탑형 자동포체계(TGS) 설계 고려요소
김종도,지재도,최태극,안성은,조성훈,김학인 한국항공우주학회 2013 한국항공우주학회 학술발표회 논문집 Vol.2013 No.11
항공산업은 고도의 기술력을 요구하는 복잡한 산업으로 기업들은 항공기 부품의 성능 및 설계검증을 위해 M&S를 활용하고 있다. M&S를 활용하여 정확한 결과 데이터를 획득하기 위해서는 정확한 조건들이 부여되어야 한다. 특히 항공기 외부에 탑재되는 장비의 경우 항공기의 기동조건을 고려하여 설계해야 하며, 본 논문에서는 헬기의 기동조건을 고려한 포탑형 자동포체계(TGS ; Turreted Gun System)에 대한 설계고려요소들을 소개하고 적용 방법을 제시한다. 헬기의 기동조건을 고려한 설계고려요소들은 항력, 가진 특성, 중력가속도 및 헬기 기동자세 등이 있다. 또한 헬기에 장착되는 포탑형 자동포체계는 사격시 강내압력에 의해 주퇴력이 발생하고 주퇴력은 포탑의 구동장치에 직접적인 충격을 가함으로 반드시 고려해야 하는 요소이다. The aviation industry is complex industrial to required high technology. The companies utilize M&S(Modeling & Simulation) to improve the performance of aircraft parts and design verification. In order to obtain accurate results, the correct conditions should be given. In particular, in the case of equipments to installed on external of aircraft, the design must take into account maneuvering conditions. In this paper, to be introduced the design factors and suggested applying method on TGS(Turreted Gun System) that considering maneuvering conditions of helicopters. The maneuvering conditions of helicopter is considered to be drag force, vibration, gravity force and maneuvering positions etc. When the firing, automatic gun make the recoil force as firing system and turret is immediately shocked. So, recoil force is essential factor for TGS design.
노대경,강영기,지재도,박진생,장주섭,Noh, Dae-Kyung,Kang, Young-Ky,Ji, Jae-Do,Park, Jin-Saeng,Jang, Joo-Sup 한국시뮬레이션학회 2015 한국시뮬레이션학회 논문지 Vol.24 No.4
자동포용 주퇴복좌장치는 사격충격을 흡수하기 위한 목적으로 개발된 장치이다. 만약 자동포에서 탄자가 발사 될 때 발생하는 매우 높은 수준의 사격충격을 흡수하지 못한다면 반동에 의하여 정밀한 타격은 불가능해진다. 본 연구에서는 이러한 역할을 하는 주퇴복좌장치의 해석모델을 멀티도메인 소프트웨어를 활용하여 개발하고 검증하는 것을 다룬다. 연구의 진행과정은 다음과 같다. 우선 설계의도를 파악하여 해석모델을 개발하고 기본적인 감쇠특성을 확인한다. 그리고 필드테스트에서 얻은 사격충격력을 해석모델에 부여하여 필드테스트와 동일한 환경을 해석도구 상에 구축한다. 최종적으로 주퇴복좌장치의 내부압력과 포신의 변위를 필드테스트 결과와 비교하여 멀티도메인 소프트웨어를 활용한 주퇴복좌장치의 해석모델이 유효성을 갖는지를 검증한다. Recoil system for 40mm automatic gun is a device developed to absorb the shock of explosion. It is impossible to conduct pinpoint strike due to recoil if very high explosive shock, which is generated when an automatic gun fires shells, can't be absorbed. This study covers development and verification of analysis model for recoil system by utilizing a multi-domain software. The research process is as in the following. First, an analysis model is developed to verify damping characteristics through understanding of design intention. Second, environment which is identical to a field test is set up on analysis tool after putting explosive force that is measured through the test into the analysis model. Finally, the analysis model for recoil system using the multi-domain software is verified if it has effectiveness with a comparison between internal pressure of the recoil system along with displacement of gun barrel and the field test result.