RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
        • 주제분류
        • 발행연도
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        잣나무 열압밀화재의 열처리에 의한 치수안정성 변화

        조범근 ( Beom Geun Cho ),황성욱 ( Sung Wook Hwang ),강호양 ( Ho Yang Kang ),이원희 ( Won Hee Lee ) 한국목재공학회 2015 목재공학 Vol.43 No.4

        국내산 잣나무(Pinus koraiensis Sieb. et Zucc.) 열압밀화재의 치수안정성 확보를 위해 열압밀화 후 열처리를 실시하여 흡수시험을 실시하였다. 잣나무재를 압축세트량 50%로 열압밀화하여 비중 0.84의 고비중재를 얻을 수 있었다. 열처리 온도와 시간이 증가함에 따라 열압밀화재의 흡수성과 팽윤성은 감소하였다. 그리고 열압밀화 후 열처리에 의해 열압밀화재의 치수안정성은 크게 향상되었다. 대조군의 두께 회복률이 11.5%인 반면, 120℃ 온도에서 24시간 열처리 된 그룹의 두께회복도는 3.8%로 나타났다. 열압밀화 후 열처리는 열압밀화재의 치수안정성 확보를 위한 매우 효과적인 방안임을 확인하였다. This study was carried out to investigate the change of dimensional stability of thermally compressed Korean pine (Pinus koraiensis Sieb. et Zucc.) wood by post heat treatment. Specific gravity of compressed wood was notably increased with thermal compression. In the compression set 50%, compressed Korean pine showed a specific gravity of 0.84. The amount of water absorption and swelling of thermally compressed Korean pine decreased with increasing temperature and time of the heat treatment. Set recovery also decreased with increasing temperature and time of heat treatment. Thermally compressed Korean pine that heat-treated in 120℃ for 24 hours showed a set recovery of 3.8%, whereas non-treated group showed 11.5%. Therefore, it was confirmed that the thermal treatment was a very effective method for the dimensional stability of the heat compressed wood.

      • KCI등재

        아동학대 보호체계 개선방안에 대한 연구

        조범근(Cho Beom Geun),김준영(Kim Jun Yeoung),배귀희(Bae Kwi Hee),문명재(Moon M Jae) 한국지방정부학회 2017 지방정부연구 Vol.20 No.4

        아동학대 보호체계의 법률적 근거가 마련된 지 10년이 넘은 시간이 지났지만, 아동학대는 근절되기는커녕 지속적으로 늘어나고 있다. 최근 아동학대로 인한 사망 사건이 연이어 발생하면서 아동보호체계 개선에 대한 사회적 요구가 높아지고 있다. 본 연구의 목적은 아동학대 실태를 파악하고 이에 대한 원인 및 효과적인 아동학대 보호업무수행체계 대안을 제시하는 것이다. 포커스 그룹 인터뷰 자료와 설문조사 자료를 토대로 정성적 방법과 정량적 방법을 동시에 활용하는 통합연구방법(Triangulation)을 적용하여 아동학대 보호체계 개선방안을 살피고자 한다. 첫째는 하드웨어적 개선방안으로서 아동보호체계에 대한 구조적·기능적 변화를 통하여 아동학대 보호업무 관련 네트워크를 개선해야 한다는 점이다. 이를 위한 단기적 방안으로 지역아동보호전문기관의 예방기능을 강화하고 중앙아동보호전문기관의 지원기능을 강화할 필요가 있다. 또한 복지부 중심의 아동학대 전반의 체계 조성을 대안으로 제시하였다. 두 번째는 소프트웨어적 개선방안으로서 부모교육 및 신고자 의무교육을 강화하는 한편 아동보호관련 기관간의 정보공유를 활성화하고 경찰과 아동보호전문기관의 신고 및 조사단계에서의 정보공유시스템을 강화해야 한다. Although more than 10 years have passed since the establishment of the legal foundation of the child protection system, the number of child abuse reports has continuously increased. Using a mixed method by analyzing data collected from both focus group interviews and survey, this study investigates the Korean child protection system and makes recommendations to improve its effectiveness and efficiency. This study offers two broad implications for the child protection system from the hardware and software perspectives. First, to improve the hardware process, we argue that an improved network across the related public agencies is required, by changing and reconstructing the child protection system. The preventive role of local child protection agencies should be enhanced, while the national child protection agency needs to improve its support of the local agencies. In addition, the establishment of a child protection system in which the Ministry of Health and Welfare takes a central role is also suggested. Second, from the software perspective, we need to enhance parent education and report responsibility and facilitate information sharing among the agencies engaged in the system, especially between the police and child protection agencies.

      • KCI등재

        국내산 잣나무 열압밀화재의 경도와 치수안정성

        황성욱 ( Sung Wook Hwang ),조범근 ( Beom Geun Cho ),이원희 ( Won Hee Lee ) 한국목재공학회 2015 목재공학 Vol.43 No.1

        국내산 잣나무재의 바닥재로의 이용을 위해 열압밀화를 실시하였다. 재질평가로서 표면경도와 치수안정성을 조사하였다. 압축률 50%로 열압밀화를 실시하여 비중 0.82∼0.92의 고비중재를 얻을 수 있었다. 열압온도의 증가와 함께 표면경도는 증가하였으며, 온도 160℃에서 30분간 열압밀화 한 시험편의 표면경도는 23.6 N/mm 로서 가장 높은 값을 나타내었다. 그러나 180℃ 이상의 고온에서는 목재표면의 열분해에 의해 오히려 경도가 감소하였다. 열압온도의 증가는 치수회복률의 감소를 야기하였으며, 열압온도 200℃에서는 14.9%로 가장 낮은 치수회복률을 나타내었다. 열압시간의 증가 또한 치수회복률 감소에 영향을 미치지만 열압온도에 의한 영향이 더욱 지배적이었다. We conducted a thermal compression of domestic Korean pinewood for a use in flooring. For the evaluation of flooring material, we measured dimensional stability and surface hardness of thermally compressed wood. It is possible to make high-specific gravity woods with a range of 0.82-0.92 after the thermal compression with 50% compression set. The surface hardness increased with an increase in the pressing temperature. The highest value of surface hardness was 23.6 N/mm , which was obtained from the thermal compressed wood with pressing temperature of 160℃ and 30 minutes of pressing time. However, the surface hardness of woods treated at high temperature of 180℃ or greater decreased. The recovery of thickness decreased with increasing the pressing temperature. For dimensional stability, compression temperature was more dominant than compression time.

      • KCI등재

        국내산 침엽수 열압밀화재의 역학적 특성

        황성욱 ( Sung Wook Hwang ),조범근 ( Beom Geun Cho ),이원희 ( Won Hee Lee ) 한국목재공학회 2014 목재공학 Vol.42 No.6

        국산 침엽수재의 용도확장을 위해 열압밀화를 실시하여 압축세트량에 따른 역학적 성능을 조사하였다. 열압밀화 공정에 의해 시험편의 밀도가 크게 향상되었다. 50% 압축 시 대조군 대비 잣나무재가 약 71%, 소나무재가 약 74%, 낙엽송재가 약 76%의 밀도가 증가되었으며, 압축세트량 증가와 함께 시험편의 재질이 균일해진다는 것을 내부밀도분포분석을 통해 알 수 있었다. 열압밀화에 따른 역학적 성능의 변화는 대조군 대비 50% 압축 시 잣나무재의 경우, 종압축강도가 76%, 휨강도가 83%, 표면경도가 55% 증가하였다. 소나무재는 종압축강도가 69%, 휨강도가 130%, 표면경도가76% 증가되었다. 낙엽송재의 경우 종압축강도가 77%, 휨강도가 120%, 표면경도가 44% 증가되었다. 국산 침엽수 열압밀화재의 강도성능은 일반적으로 낙엽송재가 가장 높고 잣나무재가 가장 낮았다. 그러나 열압밀화에 의한 강도성능의 증가율은 소나무재가 가장 높았다. In this study, we investigated mechanical properties of Korean softwoods after applying thermal compression. Density of compressed woods was notably increased with thermal compression. In case of 50% compression set, density of Korean pine (Pinus koraiensis), Japanese red pine (P. densiflora), and Larch (Larix kaempferi) wood was increased by 71%, 74%, and 76%, respectively, when compared to the control group. The strength of woods was increased and quality of the woods became homogeneous with an increases in the compression set. On the 50% compression set, the compressive strength, bending strength, and hardness of Korean pine wood was increased by 76%,83%, and 55%, respectively compared to the control group. Longitudinal compressive strengths of Japanese red pinewood increased by 69%, 130%, and 76%, respectively and those of Larch wood increased by 77%, 120%, and 44%, respectively. In thermal compression wood, mechanical properties of Larch wood was the highest, while those of Korean pine wood were the lowest. However, Japanese red pine wood showed the highest in the increase rate of mechanical properties after the thermal compression.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼